HEADSUP!!! USB MFC committed

[Julian Elischer]

On Thu, 18 Mar 2004, Christopher Sean Hilton wrote:

> On Thu, Mar 18, 2004 at 11:43:47AM -0500, Christopher Sean Hilton wrote:
> > Summary:
> > 
> > This is probably too old a datapoint but...
> > 
> > I just updated my kernel to last Tuesday's version of 4.9-STABLE.
> > 
> > Good:
> > 
> >      My USB mouse works as expected.
> > 
> >      My USB hard drive works correctly.
> > 
> > 
> > No change:
> > 
> >      My Olympus C-2100Z USB camera incorrectly comes up under the ugen driver rather
> >      than the umass driver.
> > 
> >      My Handspring Treo 300 comes up under the ugen driver rather than
> >      the visor driver. I have not honestly spent the time needed to
> >      get this device working under FreeBSD. Nuf said.

These just need ID strings put in the usbdevs file. (or somewhere)

> > 
> > Bad:
> > 
> >      My Memorex USB pendrive probes correctly if installed at boot
> >      time but hangs the USB bus if installed after boot.
> > 
> 
> Following up on my own work I found that the Pen Drive will probe
> correctly after a long period of time if it is on the USB Bus alone
> once the drive has been assigned device a disk device, da0, the usb
> bus works normally.


Should I take this to mean that there is NOT a problem, or that there
is still a problem, but not as bad as you originally thought?


> 
> 
> Boot:
> 
> Mar 18 12:06:54 endaba /kernel: acd0: DVD-ROM <HITACHI DVD-ROM GD-7000> at ata1-master PIO4
> Mar 18 12:06:54 endaba /kernel: acd1: CD-RW <CD-RW BCE5224IM> at ata1-slave PIO4
> Mar 18 12:06:54 endaba /kernel: Mounting root from ufs:/dev/ad0s3a
> Mar 18 12:07:13 endaba /kernel: drm0: <ATI Radeon QY RV100 VE> port 0xc000-0xc0ff mem 0xdd000000-0xdd00ffff,0xd0000000-0xd7ffffff irq 10 at device 0.0 on pci1
> Mar 18 12:07:13 endaba /kernel: info: [drm] AGP at 0xd8000000 64MB
> Mar 18 12:07:13 endaba /kernel: info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
> 
> Unplug the mouse:
> 
> Mar 18 12:07:29 endaba /kernel: ums0: at uhub1 port 4 (addr 3) disconnected
> Mar 18 12:07:29 endaba /kernel: ums0: detached
> Mar 18 12:07:29 endaba moused: unable to open /dev/ums0: Device not configured
> 
> Plug in the Pen drive:
> 
> Mar 18 12:07:36 endaba /kernel: umass0: USB Solid state disk, rev 1.10/1.00, addr 3
> Mar 18 12:07:55 endaba login: ROOT LOGIN (root) ON ttyv1
> 
> Go get coffee:
> 
> Mar 18 12:09:46 endaba /kernel: da0 at umass-sim0 bus 0 target 0 lun 0
> Mar 18 12:09:46 endaba /kernel: da0: <Memorex ThumbDrive 1.12> Removable Direct Access SCSI-2 device 
> Mar 18 12:09:46 endaba /kernel: da0: 650KB/s transfers
> Mar 18 12:09:46 endaba /kernel: da0: 252MB (516096 512 byte sectors: 64H 32S/T 252C)
> 
> Come back from coffee and plug in the mouse:
> 
> Mar 18 12:15:06 endaba /kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1
> Mar 18 12:15:06 endaba /kernel: ums0: 5 buttons and Z dir.
> 
> Unplug the pen drive.
> 
> Mar 18 12:21:07 endaba /kernel: umass0: at uhub1 port 4 (addr 3) disconnected
> Mar 18 12:21:07 endaba /kernel: (da0:umass-sim0:0:0:0): lost device
> Mar 18 12:21:07 endaba /kernel: (da0:umass-sim0:0:0:0): removing device entry
> Mar 18 12:21:07 endaba /kernel: umass0: detached
> Mar 18 12:21:12 endaba /kernel: umass0: USB Solid state disk, rev 1.10/1.00, addr 3
> 
> The mouse cycles on and off:
> 
> Mar 18 12:21:12 endaba /kernel: ums0: at uhub1 port 3 (addr 4) disconnected
> Mar 18 12:21:12 endaba /kernel: ums0: detached
> Mar 18 12:21:12 endaba moused: unable to open /dev/ums0: Device not configured
> Mar 18 12:21:13 endaba /kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1
> Mar 18 12:21:13 endaba /kernel: ums0: 5 buttons and Z dir.
> Mar 18 12:21:13 endaba /kernel: ums0: at uhub1 port 3 (addr 4) disconnected
> Mar 18 12:21:13 endaba /kernel: ums0: detached
> Mar 18 12:21:13 endaba moused: unable to open /dev/ums0: Device not configured
> Mar 18 12:21:14 endaba /kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1
> Mar 18 12:21:14 endaba /kernel: ums0: 5 buttons and Z dir.
> Mar 18 12:21:14 endaba /kernel: ums0: at uhub1 port 3 (addr 4) disconnected
> Mar 18 12:21:14 endaba /kernel: ums0: detached
> 
> ...
> 
> Unplug the mouse and wait:
> 
> Mar 18 12:21:39 endaba /kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1
> Mar 18 12:21:39 endaba /kernel: ums0: 5 buttons and Z dir.
> Mar 18 12:21:39 endaba /kernel: ums0: at uhub1 port 3 (addr 4) disconnected
> Mar 18 12:21:39 endaba /kernel: ums0: detached
> Mar 18 12:21:39 endaba moused: unable to open /dev/ums0: Device not configured
> 
> The Pen Drive is back:
> 
> Mar 18 12:23:22 endaba /kernel: da0 at umass-sim0 bus 0 target 0 lun 0
> Mar 18 12:23:22 endaba /kernel: da0: <Memorex ThumbDrive 1.12> Removable Direct Access SCSI-2 device 
> Mar 18 12:23:22 endaba /kernel: da0: 650KB/s transfers
> Mar 18 12:23:22 endaba /kernel: da0: 252MB (516096 512 byte sectors: 64H 32S/T 252C)
> 
> I have two of these Pen Drives. If you would like one to test I can
> send it to you.
> 
> -- chris
> 
> -- 
> Chris Hilton                                 chilton-at-vindaloo-dot-com
> ------------------------------------------------------------------------
>                 "All I was doing was trying to get home from work!"
>                                                  -- Rosa Parks
>