USB Problem

[David LaCroix]

On Sun, Sep 21, 2003 at 05:20:56PM +0200, Olivier wrote:
> I have the same problem... but without a usb hub.
> 
> With the latest -STABLE sources, my kernel freezes at usb detection. It
> freezes with "device usb" in the kernel, or via module when loaded via
> /boot/loader.conf. It stops at :
> 
> ohci0: <OHCI (generic) USB controller> mem 0xe0080000-0xe0080fff irq 12
> at device 2.0 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> 
> normally, after uhub0, i've got :
> 
> ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0: 5 buttons and Z dir.
> ohci1: <OHCI (generic) USB controller> mem 0xe0083000-0xe0083fff irq 10
> at device 2.1 on pci0
> usb1: OHCI version 1.0, legacy support
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> uhub1: device problem, disabling port 3
> pci0: <USB controller> at 2.2 irq 11
> 
> If I kldload usb after boot, there's no freeze. I haven't tried yet with
> my usb mouse detached.
> 
> I've got a Nvidia nForce2 motherboard.
>


Apologies if this sounds like a "Me Too" but, I'm experiencing a freeze 
at the exact same point -- My Microsoft 5 button optical mouse is probably
a different revision.  Also probably a different USB controller.

I have not tested any of the work-arounds (removing the USB device), but
Mine is a SIS chipset board.  (ECS K75SA)   Unfortunately, I'm away from
the affected hardware until next weekend.

Previous (working kernel) is from about 8/22 ...   non-working kernel
is from 9/20.