Via EPIA Mini-ITX motherboard

[Steve Burton]

Hi.

what a useful thread! I've just ordered enough bits to build a mini-itx 
machine (from www.miniitx.com) but they've run out of slim-line CDROM 
drives so I have to wait :-( I've ordered an M1000 (Nehemiah) 
motherboard and intend to use it for a small (tiny) intranet server 
(Apache) and logon server (Samba) for file sharing. It will also run 
DNS, DHCP, NTP and whatever take my fancy - I hope, replacing my P133 
full AT box. The difference in size and power consumption means I can 
have two!

While I've been waiting, 5.1 has been released so I now have to decide 
between 4.8 REL and 5.1 REL perhaps this is the opportunity I need to 
try v5?

thanks for all the tips.

Steve.

Charles Sprickman wrote:
> On Mon, 9 Jun 2003, Chuck Swiger wrote:
> 
> 
>>fwohci0: <VIA VT6306> port 0xd000-0xd07f mem 0xea000000-0xea0007ff irq 10 at dev
>>ice 13.0 on pci0
>>fwohci0: OHCI version 1.0 (ROM=1)
>>fwohci0: No. of Isochronous channel is 4.
>>fwohci0: EUI64 00:40:63:00:00:02:9f:f6
>>fwohci0: Phy 1394a available S400, 2 ports.
>>fwohci0: Link S400, max_rec 2048 bytes.
>>firewire0: <IEEE1394(FireWire) bus> on fwohci0
> 
> 
> While I'm not running that motherboard, my dmesg for a $15 Via firewire
> card looks to be the same:
> 
> fwohci0: <VIA VT6306> port 0xe400-0xe47f mem 0xef000000-0xef0007ff irq 15
> at dev
> ice 20.0 on pci0
> fwohci0: OHCI version 1.0 (ROM=1)
> fwohci0: No. of Isochronous channel is 8.
> fwohci0: EUI64 00:11:06:00:00:00:36:8f
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> sbp0: <SBP2/SCSI over firewire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
> firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
> 
> I use both a hard drive (w/an Oxford 911 chipset) and a CD burner with the
> same IDE bridge.  Both work very well except for the occasional lockup if
> I get too impatient and issue a few "fwcontrol reset" commands.
> 
> Just another datapoint.  4-stable as of about a month ago.
> 
> Charles
> 
> 
>>-Chuck
>>
>>_______________________________________________
>>freebsd-stable at freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>>To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>>
> 
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>