[Bug 229422] Sun Fire V245 cannot boot
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Sat Jun 30 21:48:21 UTC 2018
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=229422
--- Comment #1 from Yoshihiko Iwama <iwama at t3.rim.or.jp> ---
The log booted with 11.1-RELEASE disc1 disc are below:
{1} ok reset-all
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
screen not found.
keyboard not found.
Keyboard not present. Using ttya for input and output.
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V245, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.22, 16384 MB memory installed, Serial #XXXXXXXX.
Ethernet address 0:14:4f:XX:XX:XX, Host ID: XXXXXXXX.
{1} ok probe-scsi-all
/pci at 1e,600000/pci at 0/pci at a/pci at 0/pci at 8/scsi at 1
MPT Version 1.05, Firmware Version 1.08.04.00
Target 0
Unit 0 Disk HITACHI H106030SDSUN300GA2B0 585937500 Blocks, 300 GB
SASAddress 5000cca0123b5619 PhyNum 0
Target 1
Unit 0 Disk SEAGATE ST930003SSUN300G0B70 585937500 Blocks, 300 GB
SASAddress 5000c50033aa3a69 PhyNum 1
Target 2
Unit 0 Disk HITACHI H106030SDSUN300GA2B0 585937500 Blocks, 300 GB
SASAddress 5000cca0123b3391 PhyNum 2
Target 3
Unit 0 Disk SEAGATE ST930003SSUN300G0B70 585937500 Blocks, 300 GB
SASAddress 5000c50033aacf89 PhyNum 3
{1} ok probe-ide
Device 0 ( Primary Master )
Removable ATAPI Model: MATSHITADVD-RAM UJ-85JS
Device 1 ( Primary Slave )
Not Present
Device 2 ( Secondary Master )
Not Present
Device 3 ( Secondary Slave )
Not Present
{1} ok devalias
net /pci at 1e,600000/pci at 0/pci at 9/pci at 0/network at 4
net0 /pci at 1e,600000/pci at 0/pci at 9/pci at 0/network at 4
net1 /pci at 1e,600000/pci at 0/pci at 9/pci at 0/network at 4,1
net2 /pci at 1e,600000/pci at 0/pci at a/pci at 0/network at 4
net3 /pci at 1e,600000/pci at 0/pci at a/pci at 0/network at 4,1
cdrom /pci at 1e,600000/pci at 0/pci at 1/pci at 0/ide at 1f/cdrom at 0,0:f
ide /pci at 1e,600000/pci at 0/pci at 1/pci at 0/ide at 1f
disk /pci at 1e,600000/pci at 0/pci at a/pci at 0/pci at 8/scsi at 1/disk at 0,0
disk0 /pci at 1e,600000/pci at 0/pci at a/pci at 0/pci at 8/scsi at 1/disk at 0,0
disk1 /pci at 1e,600000/pci at 0/pci at a/pci at 0/pci at 8/scsi at 1/disk at 1,0
disk2 /pci at 1e,600000/pci at 0/pci at a/pci at 0/pci at 8/scsi at 1/disk at 2,0
disk3 /pci at 1e,600000/pci at 0/pci at a/pci at 0/pci at 8/scsi at 1/disk at 3,0
scsi /pci at 1e,600000/pci at 0/pci at a/pci at 0/pci at 8/scsi at 1
ttya /ebus at 1f,464000/serial at 2,80
ttyb /ebus at 1f,464000/serial at 2,40
sc-control /ebus at 1f,464000/rmc-comm at 2,0
name aliases
{1} ok boot cdrom
Boot device: /pci at 1e,600000/pci at 0/pci at 1/pci at 0/ide at 1f/cdrom at 0,0:f File and
args:
>> FreeBSD/sparc64 boot block
Boot path: /pci at 1e,600000/pci at 0/pci at 1/pci at 0/ide at 1f/cdrom at 0,0:f
Boot loader: /boot/loader
Consoles: Open Firmware console
FreeBSD/sparc64 bootstrap loader, Revision 1.0
(Fri Jul 21 08:44:40 UTC 2017 root at releng2.nyi.freebsd.org)
bootpath="/pci at 1e,600000/pci at 0/pci at 1/pci at 0/ide at 1f/cdrom at 0,0:a"
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0xc47740+0xf4078 syms=[0x8+0xd5a38+0x8+0xc746a]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
jumping to kernel entry at 0xc00b0000.
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 08:46:54 UTC 2017
root at releng2.nyi.freebsd.org:/usr/obj/sparc64.sparc64/usr/src/sys/GENERIC
sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory = 17179869184 (16384 MB)
avail memory = 16830537728 (16050 MB)
cpu0: Sun Microsystems UltraSparc-IIIi Processor (1504.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-IIIi Processor (1504.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: entropy device external interface
kbd0 at kbdmux0
nexus0: <Open Firmware Nexus device>
pcib0: <Sun Host-PCIe bridge> mem
0x4000f600000-0x4000f6effff,0x4000f410000-0x4000f473fff irq 1983,1982 on nexus0
pcib0: Fire, module-revision 3, IGN 0x1e
Timecounter "pcib0" frequency 188000000 Hz quality 100
pcib0: DVMA map: 0xc0000000 to 0xffffffff 131072 entries
pci0: <OFW PCI bus> on pcib0
pcib1: <OFW PCIe-PCIe bridge> mem 0x100000-0x11ffff at device 0.0 on pci0
pci1: <OFW PCI bus> on pcib1
pcib2: <OFW PCIe-PCIe bridge> at device 1.0 on pci1
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCIe-PCIe bridge> at device 0.0 on pci2
pci3: <OFW PCI bus> on pcib3
pcib4: <OFW PCIe-PCIe bridge> at device 2.0 on pci1
pci4: <OFW PCI bus> on pcib4
pcib5: <OFW PCIe-PCIe bridge> at device 8.0 on pci1
pci5: <OFW PCI bus> on pcib5
pcib6: <OFW PCIe-PCIe bridge> at device 9.0 on pci1
pci6: <OFW PCI bus> on pcib6
pcib7: <OFW PCIe-PCIe bridge> at device 0.0 on pci6
pci7: <OFW PCI bus> on pcib7
pcib8: <OFW PCIe-PCI bridge> at device 8.0 on pci7
pci8: <OFW PCI bus> on pcib8
pcib9: <OFW PCIe-PCIe bridge> at device 10.0 on pci1
pci9: <OFW PCI bus> on pcib9
pcib10: <OFW PCIe-PCIe bridge> at device 0.0 on pci9
pci10: <OFW PCI bus> on pcib10
pcib11: <OFW PCIe-PCI bridge> at device 8.0 on pci10
pci11: <OFW PCI bus> on pcib11
pcib12: <Sun Host-PCIe bridge> mem
0x4000ff00000-0x4000ffeffff,0x4000fc10000-0x4000fc73fff irq 2047,2046 on nexus0
pcib12: Fire, module-revision 3, IGN 0x1f
pcib12: DVMA map: 0xc0000000 to 0xffffffff 131072 entries
pci12: <OFW PCI bus> on pcib12
pcib13: <OFW PCIe-PCIe bridge> at device 0.0 on pci12
pci13: <OFW PCI bus> on pcib13
pcib14: <OFW PCIe-PCIe bridge> at device 0.2 on pci12
pci14: <OFW PCI bus> on pcib14
ebus0: <JBus-EBus bridge> mem 0x4000fc64000-0x4000fc6401f on nexus0
nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type
memory-controller (no driver attached)
nexus0: <memory-controller> mem 0x40000800000-0x40000800007 type
memory-controller (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff at
device 28.0 on pci3
usbus0 on ohci0
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x2000000-0x2000fff at
device 28.1 on pci3
usbus1 on ohci1
ehci0: <ALi M5239 USB 2.0 controller> mem 0x200000-0x2000ff at device 28.3 on
pci3
usbus2: EHCI version 1.0
usbus2 on ehci0
isab0: <PCI-ISA bridge> at device 30.0 on pci3
isa0: <ISA bus> on isab0
atapci0: <AcerLabs M5229 UDMA133 controller> port
0x1040-0x1047,0x1080-0x1083,0x10c0-0x10c7,0x1100-0x1103,0x1000-0x100f at device
31.0 on pci3
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
bge0: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem
0x4200000-0x420ffff,0x4010000-0x401ffff at device 4.0 on pci7
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:14:4f:a9:58:9e
bge1: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem
0x4400000-0x440ffff,0x4030000-0x403ffff at device 4.1 on pci7
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:14:4f:a9:58:9f
bge2: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem
0x4800000-0x480ffff,0x4610000-0x461ffff at device 4.0 on pci10
bge2: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus2: <MII bus> on bge2
brgphy2: <BCM5714 1000BASE-T media interface> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Ethernet address: 00:14:4f:a9:58:a0
bge3: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem
0x4a00000-0x4a0ffff,0x4630000-0x463ffff at device 4.1 on pci10
bge3: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus3: <MII bus> on bge3
brgphy3: <BCM5714 1000BASE-T media interface> PHY 1 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Ethernet address: 00:14:4f:a9:58:a1
mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem
0x4c00000-0x4c03fff,0x4c10000-0x4c1ffff at device 1.0 on pci11
mpt0: MPI Version=1.5.12.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (10 Max)
ebus0: <flashprom> addr 0-0x1fffff (no driver attached)
uart0: console (9600,n,8,1)> addr 0x200000080-0x200000087 irq 1992 on ebus0
uart1: <16550 or compatible> addr 0x200000040-0x200000047 irq 1993 on ebus0
ebus0: <rmc-comm> addr 0x200000000-0x200000007 irq 1994 (no driver attached)
ebus0: <gpio> addr 0x2000000c0 (no driver attached)
epic0: <Sun Fire V215/V245 LEDs> addr 0x300000000-0x300000080 on ebus0
ebus0: <power> addr 0x300000040-0x3000000c1 irq 1987 (no driver attached)
nexus0: <i2c> mem 0x4000fd30000-0x4000fd3003f irq 1985 type i2c (no driver
attached)
cryptosoft0: <software crypto> on nexus0
nexus0: <syscons> type unknown (no driver attached)
rtc0: <Real-Time Clock> at port 0x70-0x73 on isa0
Timecounter "tick" frequency 1504000000 Hz quality 10
Timecounter "stick" frequency 20000000 Hz quality 10
Event timer "tick" frequency 1504000000 Hz quality 1000
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <AcerLabs OHCI root HUB> at usbus0
uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AcerLabs OHCI root HUB> at usbus1
uhub1: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <AcerLabs EHCI root HUB> at usbus2
uhub2: <AcerLabs EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
da0 at mpt0 bus 0 scbus2 target 0 lun 0
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
da0: <HITACHI H106030SDSUN300G A2B0> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 001114N1MM6B PMH1MM6B
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 286102MB (585937500 512 byte sectors)
da1 at mpt0 bus 0 scbus2 target 1 lun 0
da1: <SEAGATE ST930003SSUN300G 0B70> Fixed Direct Access SPC-3 SCSI device
da1: Serial Number 001109734E4D 6SE34E4D
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 286102MB (585937500 512 byte sectors)
da2 at mpt0 bus 0 scbus2 target 2 lun 0
da2: <HITACHI H106030SDSUN300G A2B0> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number 001114N1K9XB PMH1K9XB
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 286102MB (585937500 512 byte sectors)
SMP: AP CPU #1 Launched!
da3 at mpt0 bus 0 scbus2 target 3 lun 0
Trying to mount root from cd9660:/dev/iso9660/11_1_RELEASE_SPARC64_CD [ro]...
da3: <SEAGATE ST930003SSUN300G 0B70> Fixed Direct Access SPC-3 SCSI device
da3: Serial Number 001109734D8E 6SE34D8E
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 286102MB (585937500 512 byte sectors)
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-85JS F100> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 549MB (281122 2048 byte sectors)
(cd0:ata2:0:0:0): READ(10). CDB: 28 00 00 04 4a 21 00 00 01 00
(cd0:ata2:0:0:0): CAM status: SCSI Status Error
(cd0:ata2:0:0:0): SCSI status: Check Condition
(cd0:ata2:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this
track)
(cd0:ata2:0:0:0): Info: 0x44a21
(cd0:ata2:0:0:0): Command Specific Info: 0x1d0000
(cd0:ata2:0:0:0): Error 6, Unretryable error
(cd0:ata2:0:0:0): cddone: got error 0x6 back
(cd0:ata2:0:0:0): READ(10). CDB: 28 00 00 04 4a 21 00 00 01 00
(cd0:ata2:0:0:0): CAM status: SCSI Status Error
(cd0:ata2:0:0:0): SCSI status: Check Condition
(cd0:ata2:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this
track)
(cd0:ata2:0:0:0): Info: 0x44a21
(cd0:ata2:0:0:0): Command Specific Info: 0x1d0000
(cd0:ata2:0:0:0): Error 6, Unretryable error
(cd0:ata2:0:0:0): cddone: got error 0x6 back
uhub2: 8 ports with 8 removable, self powered
(cd0:ata2:0:0:0): READ(10). CDB: 28 00 00 04 4a 21 00 00 01 00
(cd0:ata2:0:0:0): CAM status: SCSI Status Error
(cd0:ata2:0:0:0): SCSI status: Check Condition
(cd0:ata2:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this
track)
(cd0:ata2:0:0:0): Info: 0x44a21
(cd0:ata2:0:0:0): Command Specific Info: 0x1d0000
(cd0:ata2:0:0:0): Error 6, Unretryable error
(cd0:ata2:0:0:0): cddone: got error 0x6 back
ugen1.2: <vendor 0x03eb Standard USB Hub> at usbus1
uhub3 on uhub1
uhub3: <Standard USB Hub> on usbus1
uhub3: 4 ports with 4 removable, self powered
random: unblocking device.
Starting file system checks:
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up harvesting:
[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: dd: /entropy: Read-only file system
dd: /boot/entropy: Read-only file system
.
Starting Network: lo0 bge0 bge1 bge2 bge3.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:4f:a9:58:9e
hwaddr 00:14:4f:a9:58:9e
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:4f:a9:58:9f
hwaddr 00:14:4f:a9:58:9f
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
bge2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:4f:a9:58:a0
hwaddr 00:14:4f:a9:58:a0
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
bge3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:4f:a9:58:a1
hwaddr 00:14:4f:a9:58:a1
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
Starting devd.
Starting Network: bge0.
bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:4f:a9:58:9e
hwaddr 00:14:4f:a9:58:9e
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
Starting Network: bge1.
bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:4f:a9:58:9f
hwaddr 00:14:4f:a9:58:9f
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
Starting Network: bge2.
bge2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:4f:a9:58:a0
hwaddr 00:14:4f:a9:58:a0
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
Starting Network: bge3.
bge3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:4f:a9:58:a1
hwaddr 00:14:4f:a9:58:a1
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
eval: cannot create /etc/host.conf: Read-only file system
eval: cannot create /etc/host.conf: Read-only file system
eval: cannot create /etc/host.conf: Read-only file system
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Starting local daemons:
Welcome to FreeBSD!
Please choose the appropriate terminal type for your system.
Common console types are:
ansi Standard ANSI terminal
vt100 VT100 or compatible terminal
xterm xterm terminal emulator (or compatible)
cons25w cons25w terminal
Console type [vt100]:
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-sparc64
mailing list