U60 needs two tries to boot 8.3 UFS/ZFS?

[Scott Newell]

At 10:46 PM 4/5/2013, Kurt Lidl wrote:
>directory.  In other words, it probably wouldn't be too
>hard to make it work when doing a cross-install from an
>8.x host to a second disk on the same machine.

Very helpful! (I pulled the zfsloader from the 9.1 base install 
set.)  I'm at 9.1 now, but it *still* traps on first boot!  I tried 
setting the OBP boot-file env var, but it was no help.



OpenBoot 3.31, 2048 MB memory installed, Serial #12648430.
Ethernet address 8:0:20:c0:ff:ee, Host ID: 00c0ffee.

Rebooting with command: boot /pci at 1f,4000/scsi at 3/disk at 0,0:a
Boot device: /pci at 1f,4000/scsi at 3/disk at 0,0:a  File and args: /boot/zfsloader
Trap 3e
{0} ok boot
Boot device: disk  File and args: /boot/zfsloader

 >> FreeBSD/sparc64 ZFS boot block
     Boot path:   /pci at 1f,4000/scsi at 3/disk at 0,0:a
Consoles: Open Firmware console
/
FreeBSD/sparc64 ZFS enabled bootstrap loader, Revision 1.0
(root at heller.cse.buffalo.edu, Tue Dec  4 12:39:06 UTC 2012)
bootpath="zfs:zroot:"