can't use cdrecord on -current - lots of warnigs, possible ATA_CAM issue?

[Anton Shterenlikht]

On Tue, Jul 17, 2012 at 04:10:49PM +0200, Marius Strobl wrote:
> On Tue, Jul 17, 2012 at 02:01:45PM +0100, Anton Shterenlikht wrote:
> > # uname -a
> > FreeBSD mech-anton240.men.bris.ac.uk 10.0-CURRENT FreeBSD 10.0-CURRENT #6 r235474: Tue Jul 17 13:52:07 BST 2012     root at mech-anton240.men.bris.ac.uk:/usr/obj/usr/src/sys/QOF  sparc64
> > #
> > 
> > After updating to ATA_CAM framework
> > I cannot use cdrecord:
> > 
> > # cdrecord -dev=1,0,0 -sao /home/mexas/FreeBSD-8.1-RELEASE-ia64-livefs.iso
> > Cdrecord-ProDVD-ProBD-Clone 3.01a07 (sparc64-unknown-freebsd10.0) Copyright (C)
> > 1995-2012 Joerg Schilling
> > scsidev: '1,0,0'
> > scsibus: 1 target: 0 lun: 0
> > Using libscg version 'schily-0.9'.
> > Device type    : Removable CD-ROM
> > Version        : 0
> > Response Format: 2
> > Capabilities   :
> > Vendor_info    : 'TSSTcorp'
> > Identifikation : 'CDW/DVD TS-H492C'
> > Revision       : 'SI00'
> > Device seems to be: Generic mmc2 DVD-ROM.
> > cdrecord: Warning: controller returns zero sized CD write parameter page.
> > cdrecord: Warning: controller returns wrong size for CD write parameter page.
> > cdrecord: Warning: controller returns wrong page 0 for CD write parameter page (
> > 5).
> > Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
> > Driver flags   : MMC-3 SWABAUDIO BURNFREE
> > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> > cdrecord: Warning: Cannot read drive buffer.
> > cdrecord: Warning: The DMA speed test has been skipped.
> > resid: 2
> > resid: 24
> > DMA overrun, resid: -24
> > resid: 30
> > cdrecord: Warning: controller returns zero sized CD write parameter page.
> > cdrecord: Warning: controller returns wrong size for CD write parameter page.
> > cdrecord: Warning: controller returns wrong page 0 for CD write parameter page (
> > 5).
> > cdrecord: Warning: controller returns zero sized CD write parameter page.
> > cdrecord: Warning: controller returns wrong size for CD write parameter page.
> > cdrecord: Warning: controller returns wrong page 0 for CD write parameter page (
> > 5).
> > cdrecord: Cannot init drive.
> > #
> > 
> > 
> > while on the console:
> > 
> > 
> > ata3: unknown transfer phase
> > ata3: WARNING - MODE_SENSE_BIG read data overrun 2>0
> > ata3: WARNING - MODE_SENSE_BIG read data overrun 2>0
> > ata3: WARNING - MODE_SENSE_BIG read data overrun 2>0
> > ata3: WARNING - MODE_SENSE_BIG read data overrun 2>0
> > ata3: WARNING - MODE_SENSE_BIG read data overrun 2>0
> > ata3: WARNING - MODE_SENSE_BIG read data overrun 2>0
> > ata3: WARNING - MODE_SENSE_BIG read data overrun 2>0
> > ata3: WARNING - MODE_SENSE_BIG read data overrun 2>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 2>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 60>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 10>0
> > ata3: WARNING - READ_BUFFER read data overrun 4>0
> > ata3: WARNING - START_STOP read data overrun 18>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 16>0
> > ata3: WARNING - READ_CAPACITY read data overrun 8>0
> > ata3: WARNING - READ_TOC read data overrun 4>0
> > ata3: WARNING - READ_TOC read data overrun 2>0
> > ata3: WARNING - READ_DISK_INFO read data overrun 4>0
> > ata3: WARNING - READ_DISK_INFO read data overrun 4>0
> > ata3: WARNING - READ_DISK_INFO read data overrun 4>0
> > ata3: WARNING - READ_DISK_INFO read data overrun 4>0
> > ata3: WARNING - READ_DISK_INFO read data overrun 4>0
> > ata3: WARNING - READ_DISK_INFO read data overrun 4>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 34>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 2>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 2>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 10>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 2>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 2>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 2>0
> > ata3: WARNING - TEST_UNIT_READY read data overrun 10>0
> > ata3: WARNING - SYNCHRONIZE_CACHE read data overrun 2>0
> > 
> 
> Try to recompile cdrecord; could be that there once again was an
> ABI breaking change in the CAM stuff. If that doesn't help, bug
> scsi@ and mav at .

I've done this multiple times already, both
sysutils/cdrtools and sysutils/cdrtools-devel.

Ok, thanks

-- 
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 331 5944
Fax: +44 (0)117 929 4423