trouble installing to sun blade 1500

[Anton Shterenlikht]

On Wed, Dec 02, 2009 at 12:41:37PM +0000, Anton Shterenlikht wrote:
> On Tue, Dec 01, 2009 at 10:51:30PM +0100, Marius Strobl wrote:
> 
> > > > > I get to OK prompt, type "boot cdrom", but the process
> > > > > stops after a few seconds with:
> > > > >
> > > > > 	jumping to kernel entry at 0xc0088000.
> > > > >
> > 
> > You're using an unsupported framebuffer (see the release notes).
> 
> yes, I missed that, thank you
> 
> > This unfortunately isn't sufficient information and my Blade 1500
> > doesn't exhibit this problem. Could you please put the full dmesg
> > output online somewhere (this should be easy to capture when
> > using a serial console)? Can you boot to single user?
> 
> a multi-user boot dmesg:
> 	http://seis.bris.ac.uk/~mexas/dmesg-blade1500-8.0
> 
> a single user boot went ok, but some disk problems:
> 	http://seis.bris.ac.uk/~mexas/dmesg-blade1500-8.0-single-user

just to add on that. After fixing disk with fsck, boot into single
user mode is fine, and no further disk problems reported.
But multi-user mode still panics, just as before.

many thanks
anton

-- 
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 331 5944
Fax: +44 (0)117 929 4423