sparc64/121539: Interrupt storm booting 7.0-R/sparc64 on ultra5
jpd at dsb.tudelft.nl
jpd at dsb.tudelft.nl
Sun Mar 9 17:30:01 UTC 2008
>Number: 121539
>Category: sparc64
>Synopsis: Interrupt storm booting 7.0-R/sparc64 on ultra5
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-sparc64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Mar 09 17:30:01 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator: =09
>Release: FreeBSD 7.0-RELEASE sparc64
>Organization:
<organization of PR author (multiple lines)>
>Environment:
FreeBSD 7.0-RELEASE #0: Mon Feb 25 09:35:41 UTC 2008
on sparc5 hardware, ultra-IIi 360MHz, 512MB, dvd-rom drive.
Accessed over serial, with vga on kvm but no keyboard connected.
See Description for more information.
Currently a bare FreeBSD 5.4-R is installed on this machine, so if any
additional hardware information can be retrieved using that, do ask.
>Description:
Trying to boot FreeBSD 7.0R on an ultra5 resulted in the kernel failing
to proceed while displaying the following message:
interrupt storm detected on "vec2016:"; throttling interrupt source
Fetched 7.0-RELEASE-sparc64-disc1.iso, put it on cd, checked md5 and
sha256 checksums, burned it successfully, and inserted it into my
ultra5. What follows is an edited script(1) transcript of the session
over serial, using tip(1) from another FreeBSD(/i386) system. Edited
are: removal of ^M and .^H sequences, and removal of duplicate lines
with edit note and count, masked mac addresses.
Shown is output of boot -v.
Script started on Sun Mar 9 17:15:20 2008
can't open log file /var/log/aculog.
=07connected
ok boot cdrom
Initializing Memory [twirl]
=20
>How-To-Repeat:
See Description.
>Fix:
N/A
>Release-Note:
>Audit-Trail:
>Unformatted:
>> FreeBSD/sparc64 boot block
Boot path: /pci at 1f,0/pci at 1,1/ide at 3/cdrom at 2,0:f
Boot loader: /boot/loader
Consoles: Open Firmware console =20
Booting with sun4u support.
Boot path set to /pci at 1f,0/pci at 1,1/ide at 3/cdrom at 2,0:a
FreeBSD/sparc64 bootstrap loader, Revision 1.0
(root at obrian.cse.buffalo.edu, Sun Feb 24 17:36:50 UTC 2008)
bootpath=3D"/pci at 1f,0/pci at 1,1/ide at 3/cdrom at 2,0:a"
Loading /boot/defaults/loader.conf=20
/boot/kernel/kernel data=3D0x6f0848+0x72c68 syms=3D[0x8+0x76920+0x8+0x6668e]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
nothing to autoload yet.
jumping to kernel entry at 0xc0070000.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Mon Feb 25 09:35:41 UTC 2008
root at obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c44000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0c441c0.
Timecounter "tick" frequency 360000000 Hz quality 1000
real memory =3D 536870912 (512 MB)
avail memory =3D 502628352 (479 MB)
machine: SUNW,Ultra-5_10
cpu0: Sun Microsystems UltraSparc-IIi Processor (360.00 MHz CPU)
mask=3D0x90 maxtl=3D5 maxwin=3D7
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
firmware: 'isp_1000' version 1: 20142 bytes loaded at 0xc0548bc0
registered firmware set <isp_1000>
firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc054da6e
registered firmware set <isp_1040>
firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xc055340e
registered firmware set <isp_1040_it>
firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc055b4bc
registered firmware set <isp_1080>
firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xc0562f32
registered firmware set <isp_1080_it>
firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc056cdf6
registered firmware set <isp_12160>
firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xc0573b88
registered firmware set <isp_12160_it>
firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc057da24
registered firmware set <isp_2100>
firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xc0590606
registered firmware set <isp_2200>
firmware: 'isp_2300' version 1: 105078 bytes loaded at 0xc05a33a4
registered firmware set <isp_2300>
firmware: 'isp_2322' version 1: 108856 bytes loaded at 0xc05bce1a
registered firmware set <isp_2322>
firmware: 'isp_2400' version 1: 172952 bytes loaded at 0xc05da9d4
registered firmware set <isp_2400>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
null: <null device, zero device>
openfirm: <Open Firmware control device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, =
REGOPS_FUNC)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0=
x1fe010000ff irq 2032,2030,2031,2021 on nexus0
pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A
initalizing intr_countp
pcib0: [FILTER]
pcib0: [FILTER]
pcib0: [GIANT-LOCKED]
pcib0: [ITHREAD]
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pcib0: [FILTER]
pci0: <OFW PCI bus> on pcib0
pci0: domain=3D0, physical bus=3D0
found-> vendor=3D0x108e, dev=3D0xa000, revid=3D0x00
domain=3D0, bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0146, statreg=3D0x02a0, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x108e, dev=3D0x5000, revid=3D0x13
domain=3D0, bus=3D0, slot=3D1, func=3D1
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
cmdreg=3D0x0147, statreg=3D0x02a0, cachelnsz=3D16 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x108e, dev=3D0x5000, revid=3D0x13
domain=3D0, bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
cmdreg=3D0x0147, statreg=3D0x02a0, cachelnsz=3D16 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc00000-0xdfffff, 0xe00000-0xffffff
pcib1: memory decode 0xe0000000-0xffffffff
pci1: <OFW PCI bus> on pcib1
pci1: domain=3D0, physical bus=3D1
found-> vendor=3D0x108e, dev=3D0x1000, revid=3D0x01
domain=3D0, bus=3D1, slot=3D1, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0146, statreg=3D0x0280, cachelnsz=3D16 (dwords)
lattimer=3D0x52 (2460 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x19 (6250 ns)
map[10]: type Memory, range 32, base 0xf0000000, size 24, enabled
pcib1: device (null)-1 requested decoded memory range 0xf0000000-0xf0ffffff
map[14]: type Memory, range 32, base 0xf1000000, size 23, enabled
pcib1: device (null)-1 requested decoded memory range 0xf1000000-0xf17fffff
found-> vendor=3D0x108e, dev=3D0x1001, revid=3D0x01
domain=3D0, bus=3D1, slot=3D1, func=3D1
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D16 (dwords)
lattimer=3D0x52 (2460 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x05 (1250 ns)
map[10]: type Memory, range 32, base 0xe0000000, size 15, memory disabled
pcib1: device (null)-1 requested decoded memory range 0xe0000000-0xe0007fff
found-> vendor=3D0x1002, dev=3D0x4750, revid=3D0x5c
domain=3D0, bus=3D1, slot=3D2, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0080, statreg=3D0x0280, cachelnsz=3D16 (dwords)
lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D255
map[10]: type Memory, range 32, base 0xe1000000, size 24, memory disabled
pcib1: device (null)-1 requested decoded memory range 0xe1000000-0xe1ffffff
map[14]: type I/O Port, range 32, base 0, size 8, port disabled
map[18]: type Memory, range 32, base 0xe2000000, size 12, enabled
pcib1: device (null)-1 requested decoded memory range 0xe2000000-0xe2000fff
found-> vendor=3D0x1095, dev=3D0x0646, revid=3D0x03
domain=3D0, bus=3D1, slot=3D3, func=3D0
class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x10 (480 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns)
intpin=3Da, irq=3D255
map[10]: type I/O Port, range 32, base 0xc00000, size 3, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00000-0xc00007
map[14]: type I/O Port, range 32, base 0xc00008, size 2, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00008-0xc0000b
map[18]: type I/O Port, range 32, base 0xc00010, size 3, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00010-0xc00017
map[1c]: type I/O Port, range 32, base 0xc00018, size 2, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00018-0xc0001b
map[20]: type I/O Port, range 32, base 0xc00020, size 4, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00020-0xc0002f
ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff a=
t device 1.0 on pci1
ebus0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xf0000000
ebus0: Reserved 0x800000 bytes for rid 0x14 type 3 at 0xf1000000
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1=
400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-=
0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
scc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f i=
rq 43 on ebus0
scc0: not resetting hardware
scc0: [FILTER]
uart0: <SAB 82532 v3.2, channel A> on scc0
uart0: [FILTER]
uart0: CTS oflow
uart0: fast interrupt
uart0: console (9600,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on scc0
uart1: [FILTER]
uart1: CTS oflow
uart1: fast interrupt
scc0: fast interrupt
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: [FILTER]
uart2: fast interrupt
uart2: keyboard (1200,n,8,1)
uart2: keyboard not present
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
uart3: [FILTER]
uart3: fast interrupt
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x140030015c-0x140030015d,0x14=
00700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0=
x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: registered as a time-of-day clock (resolution 1000000us)
eeprom0: current time: 1205079408.000000000
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400200000-0x14002000ff,0x1400702000-0x14007020=
0f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 (no driver=
attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on =
pci1
hme0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0xe0000000
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> PHY 1 on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: bpf attached
hme0: Ethernet address: xx:xx:xx:xx:xx:xx
hme0: [MPSAFE]
hme0: [ITHREAD]
machfb0: <ATI 3D Rage Pro> mem 0xe1000000-0xe1ffffff,0xe2000000-0xe2000fff =
at device 2.0 on pci1
machfb0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xe1000000
machfb0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xe2000000
machfb0: 16 MB aperture at 0xd5ad6000, 1 KB registers at 0xe17ffc00
machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz, DSP
machfb0: resolution 800x600 at 8 bpp
atapci0: <SiI CMD 646 WDMA2 controller> port 0xc00000-0xc00007,0xc00008-0xc=
0000b,0xc00010-0xc00017,0xc00018-0xc0001b,0xc00020-0xc0002f at device 3.0 o=
n pci1
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc00020
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc00000
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc00008
ata2: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata2: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc00010
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc00018
ata3: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata3: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata3: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x1fffff, 0x200000-0x3fffff, 0x400000-0x5fff=
ff, 0x600000-0x7fffff, 0x800000-0x9fffff, 0xa00000-0xbfffff
pcib2: memory decode 0x0-0x1fffffff, 0x20000000-0x3fffffff, 0x4000000=
0-0x5fffffff, 0x60000000-0x7fffffff, 0x80000000-0x9fffffff, 0xa0000000-0xbf=
ffffff
pci2: <OFW PCI bus> on pcib2
pci2: domain=3D0, physical bus=3D2
found-> vendor=3D0x1011, dev=3D0x0024, revid=3D0x03
domain=3D0, bus=3D2, slot=3D3, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
pcib3: <OFW PCI-PCI bridge> at device 3.0 on pci2
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x1000-0x1fff
pcib3: memory decode 0x100000-0x1fffff
pcib3: no prefetched decode
pci3: <OFW PCI bus> on pcib3
pci3: domain=3D0, physical bus=3D3
found-> vendor=3D0x1011, dev=3D0x0019, revid=3D0x41
domain=3D0, bus=3D3, slot=3D4, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D16 (dwords)
lattimer=3D0xa5 (4950 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x28 (10000 n=
s)
intpin=3Da, irq=3D255
map[10]: type I/O Port, range 32, base 0x1000, size 7, port disabled
pcib3: requested I/O range 0x1000-0x107f: in range
pcib2: device (null)-1 requested decoded I/O range 0x1000-0x107f
map[14]: type Memory, range 32, base 0x100000, size 10, memory disabled
pcib3: requested memory range 0x100000-0x1003ff: good
pcib2: device (null)-1 requested decoded memory range 0x100000-0x1003ff
found-> vendor=3D0x1011, dev=3D0x0019, revid=3D0x41
domain=3D0, bus=3D3, slot=3D5, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D16 (dwords)
lattimer=3D0xa5 (4950 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x28 (10000 n=
s)
intpin=3Da, irq=3D255
map[10]: type I/O Port, range 32, base 0x1080, size 7, port disabled
pcib3: requested I/O range 0x1080-0x10ff: in range
pcib2: device (null)-1 requested decoded I/O range 0x1080-0x10ff
map[14]: type Memory, range 32, base 0x102000, size 10, memory disabled
pcib3: requested memory range 0x102000-0x1023ff: good
pcib2: device (null)-1 requested decoded memory range 0x102000-0x1023ff
found-> vendor=3D0x1011, dev=3D0x0019, revid=3D0x41
domain=3D0, bus=3D3, slot=3D6, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D16 (dwords)
lattimer=3D0xa5 (4950 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x28 (10000 n=
s)
intpin=3Da, irq=3D255
map[10]: type I/O Port, range 32, base 0x1400, size 7, port disabled
pcib3: requested I/O range 0x1400-0x147f: in range
pcib2: device (null)-1 requested decoded I/O range 0x1400-0x147f
map[14]: type Memory, range 32, base 0x104000, size 10, memory disabled
pcib3: requested memory range 0x104000-0x1043ff: good
pcib2: device (null)-1 requested decoded memory range 0x104000-0x1043ff
found-> vendor=3D0x1011, dev=3D0x0019, revid=3D0x41
domain=3D0, bus=3D3, slot=3D7, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D16 (dwords)
lattimer=3D0xa5 (4950 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x28 (10000 n=
s)
intpin=3Da, irq=3D255
map[10]: type I/O Port, range 32, base 0x1480, size 7, port disabled
pcib3: requested I/O range 0x1480-0x14ff: in range
pcib2: device (null)-1 requested decoded I/O range 0x1480-0x14ff
map[14]: type Memory, range 32, base 0x106000, size 10, memory disabled
pcib3: requested memory range 0x106000-0x1063ff: good
pcib2: device (null)-1 requested decoded memory range 0x106000-0x1063ff
dc0: <Intel 21143 10/100BaseTX> port 0x1000-0x107f mem 0x100000-0x1003ff at=
device 4.0 on pci3
dc0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1000
pcib3: slot 4 INTA is routed to irq 24
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy0: OUI 0x080017, model 0x0001, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: xx:xx:xx:xx:xx:xx
pcib0: installed DMA sync workaround for device 4.0 on bus 3
dc0: [MPSAFE]
dc0: [ITHREAD]
dc1: <Intel 21143 10/100BaseTX> port 0x1080-0x10ff mem 0x102000-0x1023ff at=
device 5.0 on pci3
dc1: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1080
pcib3: slot 5 INTA is routed to irq 25
miibus2: <MII bus> on dc1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
ukphy1: OUI 0x080017, model 0x0001, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: bpf attached
dc1: Ethernet address: xx:xx:xx:xx:xx:xx
pcib0: installed DMA sync workaround for device 5.0 on bus 3
dc1: [MPSAFE]
dc1: [ITHREAD]
dc2: <Intel 21143 10/100BaseTX> port 0x1400-0x147f mem 0x104000-0x1043ff at=
device 6.0 on pci3
dc2: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1400
pcib3: slot 6 INTA is routed to irq 26
miibus3: <MII bus> on dc2
ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus3
ukphy2: OUI 0x080017, model 0x0001, rev. 0
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: bpf attached
dc2: Ethernet address: xx:xx:xx:xx:xx:xx
pcib0: installed DMA sync workaround for device 6.0 on bus 3
dc2: [MPSAFE]
dc2: [ITHREAD]
dc3: <Intel 21143 10/100BaseTX> port 0x1480-0x14ff mem 0x106000-0x1063ff at=
device 7.0 on pci3
dc3: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1480
pcib3: slot 7 INTA is routed to irq 27
miibus4: <MII bus> on dc3
ukphy3: <Generic IEEE 802.3u media interface> PHY 1 on miibus4
ukphy3: OUI 0x080017, model 0x0001, rev. 0
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: bpf attached
dc3: Ethernet address: xx:xx:xx:xx:xx:xx
pcib0: installed DMA sync workaround for device 7.0 on bus 3
dc3: [MPSAFE]
dc3: [ITHREAD]
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=3D0x100>
syscons0: fb0, terminal emulator: sc (syscons terminal)
procfs registered
Timecounters tick every 1.000 msec
lo0: bpf attached
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc0840470
ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D80 wire
ad0: setting PIO4 on CMD 646 chip
ad0: setting WDMA2 on CMD 646 chip
ad0: 194481MB <Maxtor 6Y200P0 YAR41VW0> at ata2-master WDMA2
ad0: 398297088 sectors [395136C/16H/63S] 16 sectors/interrupt 1 depth queue
ata3-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire
GEOM: new disk ad0
acd0: setting PIO4 on CMD 646 chip
acd0: setting WDMA2 on CMD 646 chip
acd0: <HL-DT-STDVD-ROM GDR8163B/0L14> DVDR drive at ata3 as master
acd0: read 8958KB/s (8958KB/s) write 172KB/s, 256KB buffer, WDMA2
acd0: Reads: CDDA
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
ata3: reiniting channel ..
ata3: reset tp1 mask=3D03 ostat0=3D51 ostat1=3D00
ata3: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata3: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
acd0: setting PIO4 on CMD 646 chip
acd0: setting WDMA2 on CMD 646 chip
ata3: reinit done ..
acd0: TIMEOUT - READ_BIG retrying (1 retry left)
interrupt storm detected on "vec2016:"; throttling interrupt source
[*** 26 duplicate lines snipped ***]
ata3: reiniting channel ..
ata3: reset tp1 mask=3D03 ostat0=3D51 ostat1=3D00
ata3: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata3: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
acd0: setting PIO4 on CMD 646 chip
acd0: setting WDMA2 on CMD 646 chip
ata3: reinit done ..
acd0: TIMEOUT - READ_BIG retrying (0 retries left)
interrupt storm detected on "vec2016:"; throttling interrupt source
[*** 26 duplicate lines snipped ***]
ata3: reset tp1 mask=3D03 ostat0=3D51 ostat1=3D00
ata3: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata3: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
acd0: setting PIO4 on CMD 646 chip
acd0: setting WDMA2 on CMD 646 chip
ata3: reinit done ..
acd0: FAILURE - READ_BIG timed out
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
interrupt storm detected on "vec2016:"; throttling interrupt source
[*** 26 duplicate lines snipped ***]
interrupt storm detected on "vec2016:"; throttling interrupt source
ata3: reiniting channel ..
ata3: reset tp1 mask=3D03 ostat0=3D51 ostat1=3D00
ata3: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata3: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
acd0: setting PIO4 on CMD 646 chip
acd0: setting WDMA2 on CMD 646 chip
ata3: reinit done ..
acd0: TIMEOUT - READ_BIG retrying (1 retry left)
interrupt storm detected on "vec2016:"; throttling interrupt source
[*** 26 duplicate lines snipped ***]
ata3: reiniting channel ..
ata3: reset tp1 mask=3D03 ostat0=3D51 ostat1=3D00
ata3: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata3: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
acd0: setting PIO4 on CMD 646 chip
acd0: setting WDMA2 on CMD 646 chip
ata3: reinit done ..
acd0: TIMEOUT - READ_BIG retrying (0 retries left)
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
interrupt storm detected on "vec2016:"; throttling interrupt source
~
[EOT]
Script done on Sun Mar 9 17:20:08 2008
More information about the freebsd-sparc64
mailing list