Booting of 200811 snapshot on Sun Fire V880

[Beat Gätzi]

Marius Strobl wrote:
> On Mon, Dec 08, 2008 at 11:59:50AM +0100, Beat Gtzi wrote:
>> The new image solves the initial issue but now it fails at:
>> [...]
>> isp1: <Qlogic ISP 10160 PCI SCSI Adapter> port 0x1000-0x10ff mem
>> 0x2000000-0x2000fff at device 4.0 on pci3
>> pcib2: WARNING: using devices behind PCI-PCI bridges may cause data
>> corruptionisp1: [ITHREAD]
>> panic: trap: data access error
>> cpuid = 0
>> KDB: enter: panic
>> [thread pid 0 tid 100000 ]
>> Stopped at      kdb_enter+0x80: ta              %xcc, 1
>> db> bt
>> Tracing pid 0 tid 100000 td 0xc0848780
>> panic() at panic+0x20c
>> trap() at trap+0x570
>> -- data access error %o7=0xc01e6168 --
>> isp_pci_rd_reg_1080() at isp_pci_rd_reg_1080+0x198
>> isp_reset() at isp_reset+0x728
>> isp_pci_attach() at isp_pci_attach+0x1f70
>> device_attach() at device_attach+0x4a4
>> device_probe_and_attach() at device_probe_and_attach+0x64
>> bus_generic_attach() at bus_generic_attach+0x10
>> ofw_pcibus_attach() at ofw_pcibus_attach+0x72c
>> device_attach() at device_attach+0x4a4
>> device_probe_and_attach() at device_probe_and_attach+0x64
>> bus_generic_attach() at bus_generic_attach+0x10
>> ofw_pcib_attach() at ofw_pcib_attach+0x38
>> device_attach() at device_attach+0x4a4
>> device_probe_and_attach() at device_probe_and_attach+0x64
>> bus_generic_attach() at bus_generic_attach+0x10
>> ofw_pcibus_attach() at ofw_pcibus_attach+0x72c
>> device_attach() at device_attach+0x4a4
>> device_probe_and_attach() at device_probe_and_attach+0x64
>> bus_generic_attach() at bus_generic_attach+0x10
>> schizo_attach() at schizo_attach+0x13b8
>> device_attach() at device_attach+0x4a4
>> device_probe_and_attach() at device_probe_and_attach+0x64
>> bus_generic_attach() at bus_generic_attach+0x10
>> nexus_attach() at nexus_attach+0x4fc
>> device_attach() at device_attach+0x4a4
>> device_probe_and_attach() at device_probe_and_attach+0x64
>> root_bus_configure() at root_bus_configure+0x28
>> configure() at configure+0x4
>> mi_startup() at mi_startup+0x18c
>> btext() at btext+0x30
>> db>
>>
>> I could provide remote access to the server but I may need some days
>> to set up a netboot environment.
>>
> 
> If you haven't lost patience yet, could you please try (currently
> still uploading):
> http://people.freebsd.org/~marius/8.0-20081208-SNAP-sparc64-disc1.iso.gz
> ? Btw., sorry for the inconveniences, the drivers bugs you
> happen to hit aren't actually sparc64-specific though.

The new image fixes the data access error but it seems that I run into 
another bug:

isp1: <Qlogic ISP 10160 PCI SCSI Adapter> port 0x1000-0x10ff mem 
0x2000000-0x2000fff at device 4.0 on pci3
pcib2: WARNING: using devices behind PCI-PCI bridges may cause data 
corruptionisp1: [ITHREAD]
isp1: Board Type 10160, Chip Revision 0x6, loaded F/W Revision 10.4.41
isp1: invalid NVRAM header
isp2: <Qlogic ISP 10160 PCI SCSI Adapter> port 0x1100-0x11ff mem 
0x2002000-0x2002fff at device 5.0 on pci3
pcib2: WARNING: using devices behind PCI-PCI bridges may cause data 
corruptionisp2: [ITHREAD]
isp2: Board Type 10160, Chip Revision 0x6, loaded F/W Revision 10.4.41
isp2: invalid NVRAM header
pcib4: <Sun Host-PCI bridge> mem 
0x40004e00000-0x40004e17fff,0x40004c10000-0x40004c1004f,0x7ffe8000000-0x7ffe80000ff 
irq
  626,624,625,628,630 on nexus0
pcib4: Schizo, version 4, IGN 0x9, bus A, 33MHz
Timecounter "pcib4" frequency 150000000 Hz quality 100
pcib4: DVMA map: 0xc0000000 to 0xffffffff
pcib4: [FILTER]
pcib4: [FILTER]
pcib4: [FILTER]
pcib4: [FILTER]
pci4: <OFW PCI bus> on pcib4
pci4: <bridge> at device 2.0 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x100000-0x107fff at device 2.1 on pci4
miibus2: <MII bus> on hme0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 00:03:ba:xx:xx:xx
pcib4: invalid interrupt vector 0x245
hme0: couldn't establish interrupt
panic: trap: fast data access mmu miss
cpuid = 0
KDB: enter: panic
[thread pid 0 tid 100000 ]
Stopped at      kdb_enter+0x80: ta              %xcc, 1
db> bt
Tracing pid 0 tid 100000 td 0xc0848780
panic() at panic+0x20c
trap() at trap+0x570
-- fast data access mmu miss tar=0 %o7=0xc0328a48 --
_rw_rlock() at _rw_rlock+0x170
in_pcbpurgeif0() at in_pcbpurgeif0+0x24
in_ifdetach() at in_ifdetach+0x1c
if_detach() at if_detach+0x180
ether_ifdetach() at ether_ifdetach+0x58
hme_detach() at hme_detach+0x64
hme_pci_attach() at hme_pci_attach+0x388
device_attach() at device_attach+0x4a4
device_probe_and_attach() at device_probe_and_attach+0x64
bus_generic_attach() at bus_generic_attach+0x10
ofw_pcibus_attach() at ofw_pcibus_attach+0x72c
device_attach() at device_attach+0x4a4
device_probe_and_attach() at device_probe_and_attach+0x64
bus_generic_attach() at bus_generic_attach+0x10
schizo_attach() at schizo_attach+0x13b8
device_attach() at device_attach+0x4a4
device_probe_and_attach() at device_probe_and_attach+0x64
bus_generic_attach() at bus_generic_attach+0x10
nexus_attach() at nexus_attach+0x4fc
device_attach() at device_attach+0x4a4
device_probe_and_attach() at device_probe_and_attach+0x64
root_bus_configure() at root_bus_configure+0x28
configure() at configure+0x4
mi_startup() at mi_startup+0x18c
btext() at btext+0x30
db>

Thanks for your help!
Beat