esp driver complains

[Scott Long]

Koop Mast wrote:
> Hello,
> 
> On my Ultra 2 I get the following below.
> The box works like it should but its complaining about something.
> I don't know when this turned up but this wasn't there in 5.3-R or in
> older -current builds.
> 
> Koop
> 
> 
>>uname -a
> 
> FreeBSD ultra 6.0-CURRENT FreeBSD 6.0-CURRENT #70: Wed Mar  2 00:12:13
> CET 2005     root at ultra:/usr/obj/usr/src/sys/BlackBird  sparc64
> 
> Timecounters tick every 10.000 msec
> Waiting 2 seconds for SCSI devices to settle
> esp0: target didn't send tag: 15 bytes in fifo
> [127] [0] [3] [18] [139] [0] [1] [62] [83] [69] [65] [71] [65] [84] [69]
> esp0: SCSI bus reset
> esp0: target didn't send tag: 0 bytes in fifo
> esp0: SCSI bus reset
> esp0: target didn't send tag: 0 bytes in fifo
> esp0: SCSI bus reset
> esp0: target didn't send tag: 0 bytes in fifo
> esp0: SCSI bus reset
> esp0: target didn't send tag: 0 bytes in fifo
> esp0: SCSI bus reset
> SMP: AP CPU #1 Launched!
> cd0 at esp0 bus 0 target 6 lun 0
> cd0: <PLEXTOR CD-ROM PX-40TS 1.13> Removable CD-ROM SCSI-2 device
> cd0: 3.300MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Logical unit is in
> process of becoming ready
> da0 at esp0 bus 0 target 0 lun 0
> da0: <SEAGATE ST336704LC 0004> Fixed Direct Access SCSI-3 device
> da0: 6.600MB/s transfers (16bit), Tagged Queueing Enabled
> da0: 35003MB (71687369 512 byte sectors: 255H 63S/T 4462C)
> Trying to mount root from ufs:/dev/da0a
> 
> 

The negotiated transfer rates also look awefully suspicious.  You can
try reverting the recent esp driver changes like Pyun suggests.

Scott