Problems with 5.3R on Ultra1 with Qlogic SBUS Controller

[Doug White]

On Tue, 1 Mar 2005, Gheorghe Ardelean wrote:

>
> Hi,
>
> I am trying to boot my plain Ultra1 (not 1E) which is not supported "as
> is". So I put an Qlogic SBUS Diff SCSI controller (ISP1000) in it and a
> HDD on which I have preinstalled FreeBSD 5.3R ( on my Ultra 5 + Adaptec 2944).
>
> As soon as it detects the zs0 the boot process hangs.
> Has anybody any idea about what could cause this hang?

I'm assuming  you're booting off serial console here... does booting off
the framebuffer work any better?

> Here is the boot message:
>
> ok boot /sbus at 1f,0/QLGC,isp at 0,10000/sd at 0,0
> Boot device: /sbus at 1f,0/QLGC,isp at 0,10000/sd at 0,0  File and args:
>
> >> FreeBSD/sparc64 boot block
>    Boot path:   /sbus at 1f,0/QLGC,isp at 0,10000/sd at 0,0:a
>    Boot loader: /boot/loader
> Console: Open Firmware console
>
> FreeBSD/sparc64 bootstrap loader, Revision 1.0
> (root at bobbi.cse.buffalo.edu, Fri Nov  5 02:16:10 UTC 2004)
> bootpath="/sbus at 1f,0/QLGC,isp at 0,10000/sd at 0,0:a"
> WARNING: attempt to free non dma-alloc'd range: -2000 2000
> Loading /boot/defaults/loader.conf
> WARNING: attempt to free non dma-alloc'd range: -2000 2000
> WARNING: attempt to free non dma-alloc'd range: -2000 2000
> WARNING: attempt to free non dma-alloc'd range: -2000 2000
> WARNING: attempt to free non dma-alloc'd range: -2000 2000
> /boot/kernel/kernel data=0x3b5f08+0x49e28 syms=[0x8+0x4ef60+0x8+0x43746]
>
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel] in 8 seconds...
>
> Type '?' for a list of commands, 'help' for more detailed help.
> OK boot
> nothing to autoload yet.
> jumping to kernel entry at 0xc0040000.
> stray vector interrupt 2033
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.3-RELEASE #0: Fri Nov  5 19:30:40 UTC 2004
>     root at bobbi.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "tick" frequency 142988906 Hz quality 1000
> real memory  = 335544320 (320 MB)
> avail memory = 304701440 (290 MB)
> cpu0: Sun Microsystems UltraSparc-I Processor (142.99 MHz CPU)
> nexus0: <Open Firmware Nexus device>
> sbus0: clock 25.000 MHz
> sbus dvma: DVMA map: 0xfc000000 to 0xffffffff
> sbus0: [FAST]
> sbus0: [FAST]
> initializing counter-timer
> Timecounter "counter-timer" frequency 1000000 Hz quality 100
> sbus0: <U2S UPA-SBus bridge> on nexus0
> sbus0: <SUNW,CS4231>, type (unknown) (no driver attached)
> sbus0: <auxio>, type (unknown) (no driver attached)
> sbus0: <flashprom>, type (unknown) (no driver attached)
> sbus0: <SUNW,fdtwo>, type block (no driver attached)
> eeprom0: <EEPROM/clock> mem 0x1200000-0x1201fff on sbus0
> eeprom0: model mk48t59
> eeprom0: hostid 8085fe27
> zs0: <Zilog Z8530> mem 0x1100000-0x1100003 irq 2024 on sbus0
> zs0: [FAST]
> zstty0: <ttya> on zs0
>
> This is the hardware I have inside the box:
> ok cd /sbus
> ok ls
> f0083e74 cgsix at 2,0
> f007c868 SUNW,fas at 1,8800000
> f0074390 SUNW,hme at 1,8c00000
> f006b9e4 QLGC,isp at 0,10000
> f00694b0 SUNW,bpp at e,c800000
> f006668c ledma at e,8400010
> f006232c espdma at e,8400000
> f005ce34 SUNW,pll at f,1304000
> f005cd80 sc at f,1300000
> f005b324 zs at f,1000000
> f0059e84 zs at f,1100000
> f0059dd0 eeprom at f,1200000
> f0059c9c SUNW,fdtwo at f,1400000
> f0059bd4 flashprom at f,0
> f0059b44 auxio at f,1900000
> f0059a38 SUNW,CS4231 at d,c000000
>
> The machine is:
>
> Sun Ultra 1 SBus (UltraSPARC 143MHz), No Keyboard
> OpenBoot 3.25, 320 MB memory installed, Serial #xxxxxx.
> Ethernet address 8:0:20:xx:xx:xx, Host ID: yyyyyyy.
>
> I have also an Sun Swift (FAS+HME) combo inside the box but the HME is not
> able to sense the link to my switch (so I cannot netboot it). In NetBSD
> the hme works if I specify mediaopt 100BaseTX to ifconfig.
>
> Any ideas? What else could I try.
>
> Regards,
>
> Johny.
>
> _______________________________________________
> freebsd-sparc64 at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64
> To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe at freebsd.org"
>

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite at gumbysoft.com          |  www.FreeBSD.org