5.4-RCx "jumping to kernel entry" hang on Ultra1/2/30

[Royce Williams]

On Thu, 28 Apr 2005 15:19:14 -0400, Ken Smith wrote:

> On Thu, 2005-04-28 at 11:02 -0800, Royce Williams wrote:
>
>> Would it be too much trouble to ask for a boot-only as well?  Some 
of
>> us have limited bandwidth.
>
> MD5 (5.4-RC3-p1-sparc64-bootonly.iso) = e68f59a41eaa458c365cbe6edd4f7d86

This ISO consistently gets me past the hang on my Ultra30 when on 
serial A.  Full boot output attached so that other testers may 
reference it.

Ken, Marcel -- thanks very much!  I hope that Gavin's issue can also 
be resolved.

-royce

--
Royce D. Williams                                  - IP Engineering, ACS
personal: [first]@alaska.net                    - PGP: 3FC087DB/1776A531
work: [first.last]@acsalaska.net           - http://www.tycho.org/royce/
-------------- next part --------------
FreeBSD/sparc64 bootstrap loader, Revision 1.0
(root at binkley.cse.buffalo.edu, Sun Apr 17 07:33:09 UTC 2005)
bootpath="/pci at 1f,4000/scsi at 3/disk at 6,0:a"
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x3d8608+0x47c78 syms=[0x8+0x50b08+0x8+0x451b8]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
nothing to autoload yet.
jumping to kernel entry at 0xc0040000.
stray vector interrupt 2029
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC3 #1: Thu Apr 28 13:53:28 UTC 2005
    root at binkley.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "tick" frequency 295995046 Hz quality 1000
real memory  = 536870912 (512 MB)
avail memory = 501923840 (478 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci0: <OFW PCI bus> on pcib0
ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at dev ice 1.0 on pci0
auxio0: <Sun Auxiliary I/O> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart0: console (9600,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 808f5014
ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x100000-0x107fff at device 1.1 on pci0
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:8f:50:14
sym0: <875> port 0x1000-0x10ff mem 0x10a000-0x10afff,0x108000-0x1080ff at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A
pci1: <OFW PCI bus> on pcib1
nexus0: <SUNW,ffb>, type display (no driver attached)
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc04b5f50
cd0 at sym0 bus 0 target 6 lun 0
cd0: <TOSHIBA XM5701TASUN12XCD 2395> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: cd present [42840 x 512 byte records]
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST34371W SUN4.2G 7462> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST34371W SUN4.2G 7462> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
Mounting root from ufs:/dev/md0
/stand/sysinstall running as init on serial console