Trouble booting 6/12 snapshot on V210

[Stefan Bethke]

Hi,

I'm in the process of setting up a Fire V210 (dual-proc US IIIe 1 GHz, 
2 GB RAM). Since the machine has no CD-ROM, I'm netbooting, and it 
looks like everything is going fine with the loader; however, the 
machine stops very early while booting the kernel:

Sun Fire V210, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.11.4, 2048 MB memory installed, Serial #56572781.
Ethernet address 0:3:ba:5f:3b:6d, Host ID: 835f3b6d.



Boot device: disk0:a  File and args:
The file just loaded does not appear to be executable.
{1} ok boot net1:dhcp
Boot device: /pci at 1f,700000/network at 2,1:dhcp  File and args:
100 Mbps FDX Link up
Timeout waiting for BOOTP/DHCP reply. Retrying ...
32000 Console: OpenFirmware console

FreeBSD/sparc64 bootstrap loader, Revision 1.0
(root at bobbi.cse.buffalo.edu, Sun Jun 13 05:13:49 UTC 2004)
bootpath="/pci at 1f,700000/network at 2,1:dhcp"
boot: ethernet address: 00:03:ba:5f:3b:6e
100 Mbps FDX Link up
net_open: server addr: 212.12.x.x
net_open: server path: /cdrom
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x3a3e08+0x90718 syms=[0x8+0x574e0+0x8+0x45e9c]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 8 seconds...

Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
nothing to autoload yet.
jumping to kernel entry at 0xc0040000.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights 
reserved.
FreeBSD SNAP-20040612 #0: Mon Jun 14 07:25:37 UTC 2004
     root at bobbi.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.

SC Alert: Host System has Reset

Fatal Error Reset
CPU 0000.0000.0000.0001 AFSR 0210.1000.0100.0000  JETO PRIV TO
AFAR 0000.0073.faed.8000


Are there additional knobs I could enable in a custom kernel to aid 
debugging? Is the kernel debugger available this early?

I could try pulling some RAM, if that might be a problem.

FWIW, here's a Solaris 8 dmesg from an identical system sitting next to 
this one:
genunix: [ID 540533 kern.notice] SunOS Release 5.8 Version 
Generic_117350-02 64-bit
genunix: [ID 913632 kern.notice] Copyright 1983-2003 Sun Microsystems, 
Inc.  All rights reserved.
genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:58:f2:85
krtld: [ID 469452 kern.info] NOTICE: fas: 64-bit driver module not found
unix: [ID 389951 kern.info] mem = 2097152K (0x80000000)
unix: [ID 930857 kern.info] avail mem = 2050162688
rootnex: [ID 466748 kern.info] root nexus = Sun Fire V210
rootnex: [ID 349649 kern.info] pcisch0 at root: SAFARI 0x1f 0x700000
genunix: [ID 936769 kern.info] pcisch0 is /pci at 1f,700000
rootnex: [ID 349649 kern.info] pcisch1 at root: SAFARI 0x1e 0x600000
genunix: [ID 936769 kern.info] pcisch1 is /pci at 1e,600000
rootnex: [ID 349649 kern.info] pcisch2 at root: SAFARI 0x1c 0x600000
genunix: [ID 936769 kern.info] pcisch2 is /pci at 1c,600000
rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x1d 0x700000
genunix: [ID 936769 kern.info] pcisch3 is /pci at 1d,700000
scsi: [ID 365881 kern.info] /pci at 1c,600000/scsi at 2 (glm0):
         glm0 supports power management.
scsi: [ID 365881 kern.info] /pci at 1c,600000/scsi at 2 (glm0):
         Rev. 0 Symbios 53c1010-33/66 found.
pcisch: [ID 370704 kern.info] PCI-device: scsi at 2, glm0
genunix: [ID 936769 kern.info] glm0 is /pci at 1c,600000/scsi at 2
scsi: [ID 365881 kern.info] /pci at 1c,600000/scsi at 2,1 (glm1):
         glm1 supports power management.
scsi: [ID 365881 kern.info] /pci at 1c,600000/scsi at 2,1 (glm1):
         Rev. 0 Symbios 53c1010-33/66 found.
pcisch: [ID 370704 kern.info] PCI-device: scsi at 2,1, glm1
genunix: [ID 936769 kern.info] glm1 is /pci at 1c,600000/scsi at 2,1
scsi: [ID 193665 kern.info] sd1 at glm0: target 0 lun 0
genunix: [ID 936769 kern.info] sd1 is /pci at 1c,600000/scsi at 2/sd at 0,0
scsi: [ID 365881 kern.info]     <SUN36G cyl 24620 alt 2 hd 27 sec 107>
scsi: [ID 193665 kern.info] sd2 at glm0: target 1 lun 0
genunix: [ID 936769 kern.info] sd2 is /pci at 1c,600000/scsi at 2/sd at 1,0
scsi: [ID 365881 kern.info]     <SUN36G cyl 24620 alt 2 hd 27 sec 107>
swapgeneric: [ID 308332 kern.info] root on 
/pci at 1c,600000/scsi at 2/disk at 0,0:a fstype ufs
pcisch: [ID 370704 kern.info] PCI-device: isa at 7, ebus1
rootnex: [ID 349649 kern.info] mc-us3i0 at root: SAFARI 0x0 0x0 ...
genunix: [ID 936769 kern.info] mc-us3i0 is /memory-controller at 0,0
rootnex: [ID 349649 kern.info] mc-us3i1 at root: SAFARI 0x1 0x0 ...
genunix: [ID 936769 kern.info] mc-us3i1 is /memory-controller at 1,0
ebus: [ID 521012 kern.info] power1 at ebus1: offset 0,800
genunix: [ID 936769 kern.info] power1 is 
/pci at 1e,600000/isa at 7/power at 0,800
ebus: [ID 521012 kern.info] rmc_comm0 at ebus1: offset 0,3e8
genunix: [ID 936769 kern.info] rmc_comm0 is 
/pci at 1e,600000/isa at 7/rmc-comm at 0,3e8
pcisch: [ID 370704 kern.info] PCI-device: pmu at 6, pmubus1
pcisch: [ID 370704 kern.info] PCI-device: gpio at 80000000, pmugpio0
genunix: [ID 936769 kern.info] pmugpio0 is 
/pci at 1e,600000/pmu at 6/gpio at 80000000
pseudo: [ID 129642 kern.info] pseudo-device: rmclomv0
genunix: [ID 936769 kern.info] rmclomv0 is /pseudo/rmclomv at 0
rmclomv: [ID 758372 kern.notice] Hardware watchdog enabled
ebus: [ID 521012 kern.info] su2 at ebus1: offset 0,3f8
genunix: [ID 936769 kern.info] su2 is /pci at 1e,600000/isa at 7/serial at 0,3f8
ebus: [ID 521012 kern.info] su3 at ebus1: offset 0,2e8
genunix: [ID 936769 kern.info] su3 is /pci at 1e,600000/isa at 7/serial at 0,2e8
unix: [ID 270833 kern.info] cpu1: UltraSPARC-IIIi (portid 1 impl 0x16 
ver 0x24 clock 1002 MHz)
unix: [ID 270833 kern.info] cpu0: UltraSPARC-IIIi (portid 0 impl 0x16 
ver 0x24 clock 1002 MHz)
unix: [ID 721127 kern.info] cpu 0 initialization complete - online
gld: [ID 944156 kern.info] bge0: BCM570x driver v0.22: type "ether" mac 
address 00:03:ba:58:f2:85
pcisch: [ID 370704 kern.info] PCI-device: network at 2, bge0
genunix: [ID 936769 kern.info] bge0 is /pci at 1f,700000/network at 2
gld: [ID 944156 kern.info] bge1: BCM570x driver v0.22: type "ether" mac 
address 00:03:ba:58:f2:86
pcisch: [ID 370704 kern.info] PCI-device: network at 2,1, bge1
genunix: [ID 936769 kern.info] bge1 is /pci at 1f,700000/network at 2,1
gld: [ID 944156 kern.info] bge2: BCM570x driver v0.22: type "ether" mac 
address 00:03:ba:58:f2:87
pcisch: [ID 370704 kern.info] PCI-device: network at 2, bge2
genunix: [ID 936769 kern.info] bge2 is /pci at 1d,700000/network at 2
gld: [ID 944156 kern.info] bge3: BCM570x driver v0.22: type "ether" mac 
address 00:03:ba:58:f2:88
pcisch: [ID 370704 kern.info] PCI-device: network at 2,1, bge3
genunix: [ID 936769 kern.info] bge3 is /pci at 1d,700000/network at 2,1
genunix: [ID 454863 kern.info] dump on /dev/dsk/c0t0d0s1 size 4096 MB
pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo at 0
ipf: [ID 920137 kern.notice] IP Filter: attach to [bge0,0] - IPv4
ipf: [ID 989912 kern.notice] IP Filter: v3.4.32, attaching complete.
bge: [ID 801725 kern.info] NOTICE: bge0: link up 100Mbps Full-Duplex 
(initialised)
ntpdate[188]: [ID 774510 daemon.notice] step time server 212.12.62.161 
offset 0.966074 sec
pseudo: [ID 129642 kern.info] pseudo-device: tod0
genunix: [ID 936769 kern.info] tod0 is /pseudo/tod at 0
pseudo: [ID 129642 kern.info] pseudo-device: pm0
genunix: [ID 936769 kern.info] pm0 is /pseudo/pm at 0
pseudo: [ID 129642 kern.info] pseudo-device: vol0
genunix: [ID 936769 kern.info] vol0 is /pseudo/vol at 0
pseudo: [ID 129642 kern.info] pseudo-device: fcode0
genunix: [ID 936769 kern.info] fcode0 is /pseudo/fcode at 0
xntpd[300]: [ID 702911 daemon.notice] xntpd 3-5.93e Mon Sep 20 15:47:11 
PDT 1999 (1)
xntpd[300]: [ID 301315 daemon.notice] tickadj = 5, tick = 10000, 
tvu_maxslew = 495, est. hz = 100
xntpd[300]: [ID 798731 daemon.notice] using kernel phase-lock loop 0041
pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo at 0
pcisch: [ID 370704 kern.info] PCI-device: usb at a, ohci1
genunix: [ID 936769 kern.info] ohci1 is /pci at 1e,600000/usb at a


-- 
Stefan Bethke <stb at lassitu.de>   Fon +49 170 346 0140