RTC on ultra-10
Harti Brandt
novo at cs.tu-berlin.de
Thu Apr 22 09:59:28 PDT 2004
Hi all,
has anybody an idea why the eeprom does not attach on my ultra-10? The
result is that I have no RTC. Attached is the verbose boot and the config.
harti
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Thu Apr 22 18:05:28 CEST 2004
novo at 130-149-145-132.dialup.cs.tu-berlin.de:/usr/obj/sparc/sparc64/usr/src/sys/SONJA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc02bc000.
Timecounter "tick" frequency 440000000 Hz quality 0
real memory = 268435456 (256 MB)
avail memory = 252092416 (240 MB)
machine: SUNW,Ultra-5_10
cpu0: Sun Microsystems UltraSparc-IIi Processor (440.00 MHz CPU)
mask=0x91 maxtl=5 maxwin=7
null: <null device, zero device>
openfirm: <OpenFirmware control device>
mem: <memory & I/O>
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
initalizing intr_countp
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x108e, dev=0x5000, revid=0x13
bus=0, slot=1, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x108e, dev=0x5000, revid=0x13
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc00000-0xdfffff, 0xe00000-0xffffff
pcib1: memory decode 0xe0000000-0xffffffff
pci1: <OFW PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base f0000000, size 24, enabled
pcib1: device (null)-1 requested decoded memory range 0xf0000000-0xf0ffffff
map[14]: type 1, range 32, base f1000000, size 23, enabled
pcib1: device (null)-1 requested decoded memory range 0xf1000000-0xf17fffff
found-> vendor=0x108e, dev=0x1000, revid=0x01
bus=1, slot=1, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns)
map[10]: type 1, range 32, base e0000000, size 15, enabled
pcib1: device (null)-1 requested decoded memory range 0xe0000000-0xe0007fff
found-> vendor=0x108e, dev=0x1001, revid=0x01
bus=1, slot=1, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
map[10]: type 1, range 32, base e1000000, size 24, memory disabled
pcib1: device (null)-1 requested decoded memory range 0xe1000000-0xe1ffffff
map[14]: type 4, range 32, base 00000000, size 8, port disabled
map[18]: type 1, range 32, base e2000000, size 12, enabled
pcib1: device (null)-1 requested decoded memory range 0xe2000000-0xe2000fff
found-> vendor=0x1002, dev=0x4750, revid=0x5c
bus=1, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0080, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 00c00000, size 3, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00000-0xc00007
map[14]: type 4, range 32, base 00c00008, size 2, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00008-0xc0000b
map[18]: type 4, range 32, base 00c00010, size 3, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00010-0xc00017
map[1c]: type 4, range 32, base 00c00018, size 2, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00018-0xc0001b
map[20]: type 4, range 32, base 00c00020, size 4, enabled
pcib1: device (null)-1 requested decoded I/O range 0xc00020-0xc0002f
found-> vendor=0x1095, dev=0x0646, revid=0x03
bus=1, slot=3, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
pcib1: device sab0 requested decoded memory range 0xf1400000-0xf140007f
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
pcib1: device eeprom0 requested decoded memory range 0xf1000000-0xf1001fff
eeprom0: could not allocate resources
device_probe_and_attach: eeprom0 attach returned 6
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
hme0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0xe0000000
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: bpf attached
hme0: Ethernet address: 08:00:20:ff:c1:cb
hme0: [GIANT-LOCKED]
pci1: <display, VGA> at device 2.0 (no driver attached)
atapci0: <CMD 646 WDMA2 controller> port 0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007 at device 3.0 on pci1
-------------- next part --------------
machine sparc64
cpu SUN4U
ident SONJA
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_ULE #ULE scheduler
options INET #InterNETworking
# options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
# options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
# options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as root device
#options MSDOSFS #MSDOS Filesystem
# options CD9660 #ISO 9660 Filesystem
# options PROCFS #Process filesystem (requires PSEUDOFS)
# options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Keep this for a while
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
# options KTRACE #ktrace(1) syscall trace support
# options SYSVSHM #SYSV-style shared memory
# options SYSVMSG #SYSV-style message queues
# options SYSVSEM #SYSV-style semaphores
#options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
# options PFIL_HOOKS # pfil(9) framework
# Debugging for use in -current
options DDB #Enable the kernel debugger
# options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
# options WITNESS #Enable checks to detect deadlocks and cycles
# options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next line is needed
options SMP # Symmetric MultiProcessor Kernel
# Standard busses
device apb # Sun APB PCI-PCI bridge
device ebus
device isa
device pci
device sbus
device central
device fhc
options OFW_NEWPCI
# Floppy drives
# device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
# Do NOT enable ATA_STATIC_ID -- cmd646 controller will be !ata2!,
# and you will not mount an ATA /.
#options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahc # AHA2940 and onboard AIC7xxx devices
#device isp # Qlogic family
#device mpt # LSI-Logic MPT-Fusion (not yet)
#device ispfw # Firmware module for Qlogic host adapters
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
# SCSI peripherals
#device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
# syscons is the default console driver, resembling an SCO console
#device sc
#device creator # Creator graphics cards
#device splash # Splash screen and screen saver support
#options KBD_INSTALL_CDEV
device ofw_console # OpenBoot firmware console device
# Builtin hardware
device genclock # Generic clock interface
device eeprom # eeprom (really an ebus driver for the MK48Txx)
device "mk48txx" # Mostek MK48T02, MK48T08, MK48T59 clock
# Serial (COM) ports
device sab # Siemens SAB82532 based serial ports
device zs # Zilog 8530 based serial ports
#device uart # Multi-uart driver
#device puc # Multi-channel uarts
# Parallel port
#device ppc
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
#device dc # DEC/Intel 21143 and workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device gem # Sun GEM/Sun ERI/Apple GMAC
device hme # Sun HME (Happy Meal Ethernet)
#device pcn # AMD Am79C97x PCI 10/100 NICs
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocated.
#device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
#device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying/(translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf #Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da0
#device ums # Mouse
# USB Ethernet
#device aue # ADMtek USB ethernet
#device axe # ASIX Electronics USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
More information about the freebsd-sparc64
mailing list