FreeBSD 5.1-BETA2 CD-ROM on Ultra-2 with isp

[Baby Peanut]

--- Baby Peanut <baby_p_nut at yahoo.com> wrote:
> This is the first CD-ROM I have seen boot up FreeBSD on this crate.
> 
> Binary upgrade fails since it does not detect the SCSI CD-ROM drive.
> 
> isp0 mem 0x10000-0x1044f irq 2011 on sbus0
> Timecounters tick every 10.000 msec
> Waiting 15 seconds for SCSI devices to settle
> da0 at isp0 bus 0 target 2 lun 0
> da0: <SEAGATE ST318404LSUN18G 5221> Fixed Direct Access SCSI-3 device 
> da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing
> Enabled
> da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
> SMP: AP CPU #1 Launched!

Doh! the CD-ROM is hooked to the fas (esp) not the isp.
I could get an external CD-ROM.
 
> the fix-it shell goes:
> 
> DEBUG: Doctor: I can't set the controlling terminal.
> 
> but mostly works.  I got stuck somehow while using it and could only make the
> system respond with the "abort the installation?" dialog by hitting the
> interrupt key.  I hit enter to abort and it paniced with the usual
> initiate_write_inodeblock_ufs1: already started
> message
> 
> boot() called on cpu#0
> Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
> Waiting (max 60 seconds) for system process `syncer' to stop...stopped
> 
> syncing disks, buffers remaining... 14 13 13 4 panic:
> initiate_write_inodeblock_ufs1: already started
> cpuid = 1; 
> Debugger("panic")
> Stopped at      Debugger+0x1c:  ta              %xcc, 1
> db> t
> panic() at panic+0x134
> initiate_write_inodeblock_ufs1() at initiate_write_inodeblock_ufs1+0x32c
> softdep_disk_io_initiation() at softdep_disk_io_initiation+0x80
> spec_xstrategy() at spec_xstrategy+0x134
> spec_specstrategy() at spec_specstrategy+0x8
> spec_vnoperate() at spec_vnoperate+0x1c
> bwrite() at bwrite+0x3b8
> vfs_bio_awrite() at vfs_bio_awrite+0x1a0
> vop_stdfsync() at vop_stdfsync+0x120
> spec_fsync() at spec_fsync+0x20
> spec_vnoperate() at spec_vnoperate+0x1c
> ffs_sync() at ffs_sync+0x348
> sync() at sync+0xcc
> boot() at boot+0x25c
> reboot() at reboot+0x34
> syscall() at syscall+0x2a8
> -- syscall (55, FreeBSD ELF64, reboot) %o7=0x1dcf88 --
> userland() at 0x246e88
> user trace: trap %o7=0x1dcf88
> pc 0x246e88, sp 0x7fdffffda31
> pc 0x209264, sp 0x7fdffffdaf1
> pc 0x1dd09c, sp 0x7fdffffdc81
> pc 0x29f380, sp 0x7fdffffdd61
> pc 0x22346c, sp 0x7fdffffe121
> pc 0x1ddcf4, sp 0x7fdffffe1e1
> pc 0x1d1830, sp 0x7fdffffe2e1
> pc 0x209264, sp 0x7fdffffe3a1
> pc 0x1ce4f0, sp 0x7fdffffe541
> pc 0x1ce1b0, sp 0x7fdffffea21
> pc 0x1cde0c, sp 0x7fdffffeaf1
> pc 0x209264, sp 0x7fdffffebb1
> pc 0x1ce4f0, sp 0x7fdffffedc1
> pc 0x1d6f40, sp 0x7fdfffff2a1
> pc 0x10038c, sp 0x7fdfffff371
> pc 0x1001dc, sp 0x7fdfffff431
> pc 0, sp 0x7fdfffff4f1
> done
> db>  show thread
> Proc 0xfffff80045e19cb0 [CPU 1] sysinstall
> db> show pcpu
> cpuid        = 1
> curthread    = 0xfffff80045e1cc60: pid 1 "sysinstall"
> curpcb       = 0xdbab3980
> fpcurthread  = none
> idlethread   = 0xfffff80045e1ce70: pid 11 "idle: cpu1"
> spin locks held:
> db> 
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
> http://calendar.yahoo.com
> _______________________________________________
> freebsd-sparc64 at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64
> To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe at freebsd.org"


__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com