installing 5.1 on sunblade 100

[richard at uclinux.net]

> On Thu, Jul 24, 2003 at 06:44:13PM +0300, richard at uclinux.net wrote:
> > Good eveing (o;
> > 
> > Hope there are some Sparc users out there (o;
> > 
> > 
> > All my friends convinced me to try FreeBSD 5.1 on my Sunblade 100...
> > 
> > After I could manage to finally boot from CDROM it just hangs after
> > trying to mount rootfs "ufs:/dev/md0"...
> > 
> > Last messages:
> > 
> > Mounting root from ufs:/dev/md0
> > Invalid time in real time clock.
> > Check and reset the date immediately!
> > 
> > 
> > btw: what happened to "loader-tftp.gz" and the other files
> >      for booting over tftp?
> 
> Just to check:  are you booting from serial console?  System
> console isn't really supported (AFAIK).  I was able to install
> -CURRENT on my Blade 100 (as have many others) several months ago
> using the serial console.
> 
> Regards,

Just the same (o;


Booting [/boot/kernel/kernel]...               
nothing to autoload yet.
jumping to kernel entry at 0xc0040000.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun  5 11:39:19 GMT 2003
    root at sparkle.attlabs.net:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0828000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0828190.
Timecounter "tick"  frequency 502000000 Hz
real memory  = 775069696 (739 MB)
avail memory = 743071744 (708 MB)
cpu0: Sun Microsystems UltraSparc-IIe Processor (502.00 MHz CPU)
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc0424ca0
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre (US-IIe) compatible, impl 0, version 0, ign 0x7c0, bus A
DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <PCI bus> on pcib0
pci0: <old, non-VGA display device> at device 3.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 5.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 8.0 (no driver attached)
ebus0: revision 0x01
ebus0: <idprom>: incomplete
ebus0: <PCI-EBus3 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 12.0 on pci0
ebus0: <flashprom> addr 0-0xfffff (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x100000000-0x100001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 8308434c
gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0x400000-0x41ffff irq 6 at device 12.1 on pci0
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: Ethernet address: 00:03:ba:08:43:4c, 2KB RX fifo, 2KB TX fifo
fwohci0: vendor=108e, dev=1102
fwohci0: <1394 Open Host Controller Interface> mem 0x422000-0x4227ff,0x420000-0x4207ff irq 28 at device 12.2 on pci0
stray vector interrupt 2014
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:03:ba:ff:fe:08:43:4c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:03:ba:08:43:4c
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
pci0: <serial bus, USB> at device 12.3 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA66 controller> port 0xa20-0xa2f,0xa08-0xa0b,0xa10-0xa17,0xa18-0xa1b,0xa00-0xa07 irq 12 at device 13.0 on pci0
ata2: at 0xa00 on atapci0
ata3: at 0xa10 on atapci0
pci0: <display, VGA> at device 19.0 (no driver attached)
Timecounters tick every 10.000 msec
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata2-master UDMA66
acd0: CDROM <LTN485S> at ata2-slave PIO4
Mounting root from ufs:/dev/md0
Invalid time in real time clock.
Check and reset the date immediately!



best regards
rick