OFW_NEWPCI dmesg diffs

[Marcel Moolenaar]

Ok,

I tried the OFW_NEWPCI option and I'm missing the irq info in the
dmesg output. Everything works ok. The diff is attached.

BTW: vmstat -i doesn't work:

sparc% vmstat -i
interrupt                     total       rate
Total                             0          0
sparc% 

FYI,

-- 
 Marcel Moolenaar	  USPA: A-39004		 marcel at xcllnt.net
-------------- next part --------------
--- dmesg.sparc	Tue Jul  1 20:53:09 2003
+++ dmesg.sparc.new	Tue Jul  1 20:53:02 2003
@@ -1,9 +1,9 @@
 Copyright (c) 1992-2003 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
-FreeBSD 5.1-CURRENT #0: Sun Jun 29 14:18:51 PDT 2003
-    marcel at sparc.pn.xcllnt.net:/usr/obj/nfs/freebsd/5.x/src/sys/SPARC
-Preloaded elf kernel "/boot/kernel/kernel" at 0xc0302000.
+FreeBSD 5.1-CURRENT #6: Tue Jul  1 19:08:10 PDT 2003
+    marcel at sparc.pn.xcllnt.net:/nfs/freebsd/5.x/src/sys/sparc64/compile/SPARC
+Preloaded elf kernel "/boot/kernel/kernel" at 0xc0304000.
 Timecounter "tick"  frequency 400000000 Hz
 real memory  = 268435456 (256 MB)
 avail memory = 252256256 (240 MB)
@@ -12,12 +12,9 @@
 pcib0: <U2P UPA-PCI bridge> on nexus0
 pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
 DVMA map: 0xc0000000 to 0xc3ffffff
-pci0: <PCI bus> on pcib0
-pci0: <bridge, HOST-PCI> at device 0.0 (no driver attached)
-pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0
-pci2: <PCI bus> on pcib1
-pcib2: <APB PCI-PCI bridge> at device 1.1 on pci0
-pci1: <PCI bus> on pcib2
+pci0: <OFW PCI bus> on pcib0
+pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
+pci1: <OFW PCI bus> on pcib1
 ebus0: revision 0x01
 ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1
 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
@@ -36,15 +33,17 @@
 eeprom0: hostid 80f102c2
 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
 ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached)
-hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff irq 33 at device 1.1 on pci1
+hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
 hme0: Ethernet address: 08:00:20:f1:02:c2
 miibus0: <MII bus> on hme0
 nsphy0: <DP83840 10/100 media interface> on miibus0
 nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pci1: <display, VGA> at device 2.0 (no driver attached)
-atapci0: <CMD 646 WDMA2 controller> port 0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007 irq 32 at device 3.0 on pci1
+atapci0: <CMD 646 WDMA2 controller> port 0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007 at device 3.0 on pci1
 ata2: at 0xc00000 on atapci0
 ata3: at 0xc00010 on atapci0
+pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
+pci2: <OFW PCI bus> on pcib2
 Timecounters tick every 10.000 msec
 ad0: 8693MB <ST39111A> [17662/16/63] at ata3-master WDMA2
 acd0: CDROM <CRD-8322B> at ata2-master PIO4