HP Netserver LT 6000r

[Andrew McNaughton]

On Mon, 11 Jul 2005, John Baldwin wrote:

>> What command will show me the current IRQ assignements? Just grepping
>> for irq in the dmesg gives:
>>
>> ioapic0 <Version 1.1> irqs 0-15 on motherboard
>> ioapic1 <Version 1.1> irqs 16-31 on motherboard
>> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1800-0x183f mem
>> 0xec900000-0xec9fffff,0xec801000-0xec801fff irq 18 at device 6.0 on pci0
>> amr0: <LSILogic MegaRAID 1.51> mem 0xf4000000-0xf7ffffff irq 20 at
>> device 3.1 on pci4
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
>> unknown: <PNP0f13> can't assign resources (irq)
>>
>> Is there something more tailored than that? I scanned through sysctl but
>> it doesn't look like they are listed therein.
>
> No, there isn't a good command other than dmesg | grep irq.  I should probably
> write one actually.

That would be very good.  After a server has been running for a while the 
boot info gets displaced out of the buffer dmesg accesses, and the logs in 
/var/log would typically have been rolled over and removed as well.

On my servers I run an rc.d script which stores the dmesg output for 
future reference.  Is something like that worth adding to the standard 
distribution?

Andrew McNaughton


-------------------------------------------------------------------
Andrew McNaughton           http://www.scoop.co.nz/
andrew at scoop.co.nz          Mobile: +61 422 753 792

--
Of all forms of caution, caution in love is the most fatal
--
pgp encrypted mail welcome
keyid: 70F6C32D      keyserver: pgp.mit.edu
5688 2396 AA81 036A EBAC 2DD4 1BEA 7975 A84F 6686