Dmesg on 4-way w/HTT (8 procs total)
Cagle, John (ISS-Houston)
john.cagle at hp.com
Thu Nov 6 17:54:25 PST 2003
> > -----Original Message-----
> > From: John Baldwin
> >
> > My GENERIC build finished ok, so it should at least be workable for
> > most people. By the way, if anyone has a machine with 8 or
> more CPUs
> > (John Cagle, I know you are out there. :)) feel free to test the new
> > code out and post a boot -v dmesg log to the smp@ list. Thanks.
>
> Hi John!
>
> Yes, I'm out here! ;-)
>
> Attached below is a dmesg from the ProLiant DL560 which has 4 XEON-HTT
> processors. I'll try the 8-way next. This PAE kernel is from a cvsup
> early this morning.
>
> Thanks,
> John Cagle
Sorry, that wasn't too useful. I put "-v" in /boot.config but that was
Pointless. I've attached a *REAL* boot dmesg with -v below.
Notice that I've got a Dual-Port NIC in a PCI slot (fxp0&1), and the
ports
have IRQ's 26 & 27 now! Woo Hoo! Previously that didn't work.
However, it looks like there may be some timer problems in the ACPI code
since it's complaining that some ACPI timers look bad.
Thanks,
John
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.1-CURRENT #0: Thu Nov 6 17:36:05 GMT 2003
root at bigdaddy:/usr/obj/usr/src/sys/PAE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06fd000.
ACPI APIC Table: <COMPAQ 00000083>
Calibrating clock(s) ... i8254 clock: 1193349 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1888690784 Hz
CPU: Intel(R) XEON(TM) MP CPU 1.90GHz (1888.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf22 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Hyperthreading: 2 logical CPUs
real memory = 9126801408 (8703 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000000887000 - 0x00000000efff9fff, 4017565696 bytes (980851 pages)
0x0000000100000000 - 0x0000000215e58fff, 4662333440 bytes (1138265
pages)
avail memory = 8611352576 (8212 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 2, logical 0:2
APIC ID: physical 3, logical 0:3
APIC ID: physical 4, logical 1:0
APIC ID: physical 5, logical 1:1
APIC ID: physical 6, logical 1:2
APIC ID: physical 7, logical 1:3
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x94
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
APIC: CPU 4 has ACPI ID 4
APIC: CPU 5 has ACPI ID 5
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 7
MADT: Found IO APIC ID 2, Vector 0 at 0xfec00000
ioapic0: intpin 0 -> ExtINT
ioapic0: intpin 1 -> irq 1
ioapic0: intpin 2 -> irq 2
ioapic0: intpin 3 -> irq 3
ioapic0: intpin 4 -> irq 4
ioapic0: intpin 5 -> irq 5
ioapic0: intpin 6 -> irq 6
ioapic0: intpin 7 -> irq 7
ioapic0: intpin 8 -> irq 8
ioapic0: intpin 9 -> irq 9
ioapic0: intpin 10 -> irq 10
ioapic0: intpin 11 -> irq 11
ioapic0: intpin 12 -> irq 12
ioapic0: intpin 13 -> irq 13
ioapic0: intpin 14 -> irq 14
ioapic0: intpin 15 -> irq 15
MADT: Found IO APIC ID 3, Vector 16 at 0xfec01000
ioapic1: intpin 0 -> irq 16
ioapic1: intpin 1 -> irq 17
ioapic1: intpin 2 -> irq 18
ioapic1: intpin 3 -> irq 19
ioapic1: intpin 4 -> irq 20
ioapic1: intpin 5 -> irq 21
ioapic1: intpin 6 -> irq 22
ioapic1: intpin 7 -> irq 23
ioapic1: intpin 8 -> irq 24
ioapic1: intpin 9 -> irq 25
ioapic1: intpin 10 -> irq 26
ioapic1: intpin 11 -> irq 27
ioapic1: intpin 12 -> irq 28
ioapic1: intpin 13 -> irq 29
ioapic1: intpin 14 -> irq 30
ioapic1: intpin 15 -> irq 31
MADT: Found IO APIC ID 4, Vector 32 at 0xfec02000
ioapic2: intpin 0 -> irq 32
ioapic2: intpin 1 -> irq 33
ioapic2: intpin 2 -> irq 34
ioapic2: intpin 3 -> irq 35
ioapic2: intpin 4 -> irq 36
ioapic2: intpin 5 -> irq 37
ioapic2: intpin 6 -> irq 38
ioapic2: intpin 7 -> irq 39
ioapic2: intpin 8 -> irq 40
ioapic2: intpin 9 -> irq 41
ioapic2: intpin 10 -> irq 42
ioapic2: intpin 11 -> irq 43
ioapic2: intpin 12 -> irq 44
ioapic2: intpin 13 -> irq 45
ioapic2: intpin 14 -> irq 46
ioapic2: intpin 15 -> irq 47
MADT: Found IO APIC ID 5, Vector 48 at 0xfec03000
ioapic3: intpin 0 -> irq 48
ioapic3: intpin 1 -> irq 49
ioapic3: intpin 2 -> irq 50
ioapic3: intpin 3 -> irq 51
ioapic3: intpin 4 -> irq 52
ioapic3: intpin 5 -> irq 53
ioapic3: intpin 6 -> irq 54
ioapic3: intpin 7 -> irq 55
ioapic3: intpin 8 -> irq 56
ioapic3: intpin 9 -> irq 57
ioapic3: intpin 10 -> irq 58
ioapic3: intpin 11 -> irq 59
ioapic3: intpin 12 -> irq 60
ioapic3: intpin 13 -> irq 61
ioapic3: intpin 14 -> irq 62
ioapic3: intpin 15 -> irq 63
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: active-hi
lapic: Routing NMI -> LINT1
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic3 <Version 1.1> irqs 48-63 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
acpi0: <COMPAQ P30 > on motherboard
ACPI-1016: *** Info: There are no GPE blocks defined in the FADT
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 4, max = 7, width = 3
ACPI timer looks BAD min = 4, max = 7, width = 3
ACPI timer looks BAD min = 4, max = 7, width = 3
ACPI timer looks BAD min = 4, max = 7, width = 3
ACPI timer looks BAD min = 4, max = 8, width = 4
ACPI timer looks BAD min = 4, max = 8, width = 4
ACPI timer looks BAD min = 4, max = 7, width = 3
ACPI timer looks BAD min = 4, max = 7, width = 3
ACPI timer looks BAD min = 4, max = 7, width = 3
ACPI timer looks BAD min = 4, max = 7, width = 3
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00121166)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_cpu4: <CPU> on acpi0
acpi_cpu5: <CPU> on acpi0
acpi_cpu6: <CPU> on acpi0
acpi_cpu7: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
\\_SB_.IUSB irq 7: [ 4 5 7 10 11 15] 0.15.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.IUSB irq 7: [ 4 5 7 10 11 15] 0.15.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0012, revid=0x13
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0012, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0000, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base f6000000, size 24, enabled
map[14]: type 4, range 32, base 00002400, size 8, enabled
map[18]: type 1, range 32, base f5ff0000, size 12, enabled
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 1, range 32, base f5fe0000, size 9, enabled
pcib0: matched entry for 0.4.INTA (source )
pcib0: device is hardwired to IRQ 16
found-> vendor=0x0e11, dev=0xb203, revid=0x01
bus=0, slot=4, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002800, size 8, enabled
map[14]: type 1, range 32, base f5fd0000, size 11, enabled
map[18]: type 1, range 32, base f5fc0000, size 13, enabled
map[1c]: type 1, range 32, base f5f00000, size 19, enabled
pcib0: matched entry for 0.4.INTB (source )
pcib0: device is hardwired to IRQ 17
found-> vendor=0x0e11, dev=0xb204, revid=0x01
bus=0, slot=4, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1166, dev=0x0201, revid=0x93
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 00002000, size 4, enabled
found-> vendor=0x1166, dev=0x0212, revid=0x93
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base f5ef0000, size 12, enabled
pcib0: matched entry for 0.15.INTA (source \\_SB_.IUSB)
pcib0: _CRS resource entry has unsupported type 14
found-> vendor=0x1166, dev=0x0220, revid=0x05
bus=0, slot=15, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000
ns)
intpin=a, irq=7
found-> vendor=0x1166, dev=0x0225, revid=0x00
bus=0, slot=15, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
bus=0, slot=17, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
15.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x24 lsb=0xff msb=0x00
ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 64, base f7bc0000, size 18, enabled
map[18]: type 4, range 32, base 00003000, size 8, enabled
map[1c]: type 3, range 64, base f7af0000, size 14, enabled
pcib1: matched entry for 1.3.INTA (source )
pcib1: device is hardwired to IRQ 30
found-> vendor=0x0e11, dev=0xb178, revid=0x01
bus=1, slot=3, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=30
powerspec 2 supports D0 D1 D3 current D0
MSI supports 2 messages, 64 bit
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem
0xf7af0000-0xf7af3fff,0xf7bc0000-0xf7bfffff irq 30 at device 3.0 on pci1
ciss0: using 256 of 1024 available commands
ciss0: 1 logical drive configured
ciss0: firmware 1.92
ciss0: 2 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 1
ciss0: supported I/O methods 0xe<simple,performant,MEMQ>
ciss0: active I/O method 0x3<simple>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 1000us
ciss0: interrupt coalesce count 16
ciss0: max outstanding commands 1024
ciss0: bus types 0x2<ultra3>
ciss0: server name ''
ciss0: heartbeat 0x1000004b
ciss0: 1 logical drive
ciss0: logical drive 0: RAID 1, 16896MB online
pcib2: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 64, base f7cf0000, size 16, enabled
pcib2: matched entry for 2.1.INTA (source )
pcib2: device is hardwired to IRQ 31
found-> vendor=0x14e4, dev=0x16a7, revid=0x02
bus=2, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=31
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base f7ce0000, size 16, enabled
pcib2: matched entry for 2.2.INTA (source )
pcib2: device is hardwired to IRQ 23
found-> vendor=0x14e4, dev=0x16a7, revid=0x02
bus=2, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=23
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7cf0000-0xf7cfffff irq 31 at device 1.0 on pci2
bge0: Ethernet address: 00:0b:cd:29:69:35
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: bpf attached
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7ce0000-0xf7ceffff irq 23 at device 2.0 on pci2
bge1: Ethernet address: 00:0b:cd:29:69:36
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: bpf attached
pcib3: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci6: <ACPI PCI bus> on pcib4
pci6: physical bus=6
found-> vendor=0x1011, dev=0x0026, revid=0x02
bus=6, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0
ns)
pcib5: <PCI-PCI bridge> at device 2.0 on pci6
pcib5: secondary bus 7
pcib5: subordinate bus 7
pcib5: I/O decode 0x4000-0x4fff
pcib5: memory decode 0xf7e00000-0xf7ffffff
pcib5: prefetched decode 0xf7d00000-0xf7dfffff
pci7: <PCI bus> on pcib5
pci7: physical bus=7
map[10]: type 3, range 32, base f7df0000, size 12, enabled
map[14]: type 4, range 32, base 00004000, size 5, enabled
map[18]: type 1, range 32, base f7f00000, size 20, enabled
pcib4: matched entry for 6.2.INTA (source )
pcib4: device is hardwired to IRQ 26
pcib5: slot 4 INTA is routed to irq 26
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=7, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38
(14000 ns)
intpin=a, irq=26
map[10]: type 3, range 32, base f7de0000, size 12, enabled
map[14]: type 4, range 32, base 00004020, size 5, enabled
map[18]: type 1, range 32, base f7e00000, size 20, enabled
pcib4: matched entry for 6.2.INTB (source )
pcib4: device is hardwired to IRQ 27
pcib5: slot 5 INTA is routed to irq 27
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=7, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38
(14000 ns)
intpin=a, irq=27
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x4000-0x401f mem
0xf7f00000-0xf7ffffff,0xf7df0000-0xf7df0fff irq 26 at device 4.0 on pci7
pcib5: device fxp0 requested decoded memory range 0xf7df0000-0xf7df0fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:08:c7:91:14:c2
fxp0: PCI IDs: 8086 1229 0e11 b0dd 0005
fxp0: Dynamic Standby mode is disabled
miibus2: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus2
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp1: <Intel 82558 Pro/100 Ethernet> port 0x4020-0x403f mem
0xf7e00000-0xf7efffff,0xf7de0000-0xf7de0fff irq 27 at device 5.0 on pci7
pcib5: device fxp1 requested decoded memory range 0xf7de0000-0xf7de0fff
fxp1: using memory space register mapping
fxp1: Ethernet address 00:08:c7:91:14:c3
fxp1: PCI IDs: 8086 1229 0e11 b0dd 0005
fxp1: Dynamic Standby mode is disabled
miibus3: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus3
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
isa_dmainit(2, 1024) failed
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1888690784 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0xffffffff udma=0xffffffff cable=40pin
acd0: setting PIO4 on ServerWorks CSB5 chip
acd0: <COMPAQ CD-ROM SN-124/N104> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): error 22
(probe0:ciss0:0:0:0): Unretryable Error
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): error 22
(probe0:ciss0:0:0:0): Unretryable Error
pass0 at ciss0 bus 0 target 0 lun 0
pass0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
pass0: 135.168MB/s transfers
GEOM: create disk da0 dp=0xd2d8e450
GEOM: new disk da0
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C)
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x00050014 LDR: 0x18000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x00050014 LDR: 0x11000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x14000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x00050014 LDR: 0x12000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 1
ioapic0: routing intpin 6 (IRQ 6) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 9 (IRQ 9) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 1
ioapic0: routing intpin 14 (IRQ 14) to cluster 1
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic1: routing intpin 7 (IRQ 23) to cluster 1
ioapic1: routing intpin 10 (IRQ 26) to cluster 0
ioapic1: routing intpin 11 (IRQ 27) to cluster 1
ioapic1: routing intpin 14 (IRQ 30) to cluster 1
ioapic1: routing intpin 15 (IRQ 31) to cluster 0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/32 s:32 l:35553088
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 16384 length 18203181056 end 18203197439
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
GEOM: Configure da0s1a, start 0 length 268435456 end 268435455
GEOM: Configure da0s1b, start 268435456 length 8589934592 end 8858370047
GEOM: Configure da0s1c, start 0 length 18203181056 end 18203181055
GEOM: Configure da0s1d, start 8858370048 length 268435456 end 9126805503
GEOM: Configure da0s1e, start 9126805504 length 268435456 end 9395240959
GEOM: Configure da0s1f, start 9395240960 length 8807940096 end
18203181055
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
bge0: gigabit link up
More information about the freebsd-smp
mailing list