Steve Wingate s.wingate at
Wed Nov 5 13:04:06 PST 2003

I don't see this as a recognized option in 4.9-STABLE

daemon# uname -a
FreeBSD 4.9-STABLE FreeBSD 4.9-STABLE #11: Wed Oct 29
13:08:33 PST 2003     root at
daemon# sysctl machdep.hlt_logical_cpus=0
sysctl: unknown oid 'machdep.hlt_logical_cpus'

daemon# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #11: Wed Oct 29 13:08:33 PST 2003
    root at
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) XEON(TM) CPU 1.80GHz (1784.28-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4

  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1048512K bytes)
avail memory = 1041297408 (1016892K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03b4000.
Preloaded elf module "splash_bmp.ko" at 0xc03b409c.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
module_register_init: MOD_LOAD (splash_bmp, c03af774, 0) error 2
Using $PIR table, 9 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 5
IOAPIC #0 intpin 23 -> irq 10
pci0: <PCI bus> on pcib0
agp0: <Intel 82860 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device
0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at device 1.0 on pci0
IOAPIC #0 intpin 22 -> irq 11
pci1: <PCI bus> on pcib1
pci1: <ATI model 514c graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2533)> at device 2.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=1360)> at device 31.0 on
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x8086, dev=0x1161) at 0.0
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
IOAPIC #0 intpin 16 -> irq 14
pci4: <PCI bus> on pcib4
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa000-0xa03f mem
0xe7000000-0xe70fffff,0xe7203000-0xe7203fff irq 5 at device 1.0 on pci4
fxp0: Ethernet address 00:04:ac:23:7b:e1
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <895> port 0xa400-0xa4ff mem
0xe7201000-0xe7201fff,0xe7200000-0xe72000ff irq 2 at device 3.0 on pci4
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem
0xe7100000-0xe71fffff,0xe7202000-0xe7202fff irq 14 at device 4.0 on pci4
fxp1: Ethernet address 00:30:48:22:95:5c
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xac00-0xac1f irq 14 at device 7.0 on pci4
pcm0: <TriTech TR28602 AC97 Codec>
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f
irq 2 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 5
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd400-0xd41f
irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm1: <Intel ICH2 (82801BA)> port 0xdc00-0xdc3f,0xd800-0xd8ff irq 5 at
device 31.5 on pci0
pcm1: <Cirrus Logic CS4299 AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd1fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 8 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
da1 at sym0 bus 0 target 2 lun 0
da1: <FUJITSU MAN3367MP 0108> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
da1: 35044MB (71771688 512 byte sectors: 255H 63S/T 4467C)
da0 at sym0 bus 0 target 1 lun 0
da0: <SEAGATE ST318451LW 0003> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
da0: 17501MB (35843671 512 byte sectors: 255H 63S/T 2231C)
cd1 at sym0 bus 0 target 5 lun 0
cd1: <PIONEER DVD-ROM DVD-305 1.03> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 16)
cd1: cd present [200159 x 2048 byte records]
cd0 at sym0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-R   PX-W124TS 1.06> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
drm0: <ATI Radeon QL R200 8500 LE> port 0xc000-0xc0ff mem
0xe5000000-0xe500ffff,0xd0000000-0xdfffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
info: [drm] Loading R200 Microcode
got bad cookie vp 0xe3d72280 bp 0xcf960fb4

|Steve Wingate		<s_dot_wingate at>
|MCSE, CCNA		Wed Nov  5 12:50:00 PST 2003
|12:50PM  up 6 days,  4:57, 1 user, load averages: 0.03, 0.01, 0.00

More information about the freebsd-smp mailing list