SuperMicro X5DEI-GG
Guy Helmer
ghelmer at palisadesys.com
Wed May 14 08:55:04 PDT 2003
Has anyone had positive or negative experience with the SuperMicro X5DEI-GG
dual-Xeon motherboard? It seems to work OK on a uniprocessor kernel, but
FreeBSD 4.8 SMP kernels lock up after the "mounting root" message or after
ifconfiging lo0 in the startup scripts. Our first machine may just be
flaky, so I'll try another one as soon as possible...
It's supposed to have a ServerWorks GC-SL chipset, but dmesg doesn't
recognize the specific model.
Machine details (dmesg, pciconf, mptable) follow.
Thanks,
Guy
Guy Helmer, Ph.D., Sr. Software Engineer, Palisade Systems, Inc.
http://www.palisadesys.com/~ghelmer/
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #23: Fri May 2 14:20:47 GMT 2003
support at palisadesys.com:PH
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.12-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536805376 (524224K bytes)
avail memory = 518397952 (506248K bytes)
Preloaded elf kernel "kernel.UP" at 0xc03d1000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f4a50
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci0: <PCI bus> on pcib0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port
0xe000-0xe03f mem 0xfeb80000-0xfeb9ffff irq 9 at device 8.0 on pci0
em0: Speed:100 Mbps Duplex:Half
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port
0xe400-0xe43f mem 0xfeba0000-0xfebbffff irq 11 at device 9.0 on pci0
em1: Speed:N/A Duplex:N/A
pci0: <ATI Mach64-GR graphics accelerator> at 11.0 irq 10
atapci0: <Generic PCI ATA controller> port
0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 10 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI to ISA bridge (vendor=1166 device=0227)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib255: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci255: <PCI bus> on pcib255
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 152627MB <WDC WD1600BB-00DAA0> [310101/16/63] at ata0-master BIOSDMA
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled, default to deny, logging disabled
pciconf:
chip0 at pci0:0:0: class=0x060000 card=0x00000000 chip=0x00171166 rev=0x32
hdr=0x00
chip1 at pci0:0:1: class=0x060000 card=0x00000000 chip=0x00171166 rev=0x00
hdr=0x00
em0 at pci0:8:0: class=0x020000 card=0x004e8086 chip=0x100e8086 rev=0x02
hdr=0x00
em1 at pci0:9:0: class=0x020000 card=0x004e8086 chip=0x100e8086 rev=0x02
hdr=0x00
none0 at pci0:11:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27
hdr=0x00
chip2 at pci0:15:0: class=0x060000 card=0x415515d9 chip=0x02031166 rev=0xa0
hdr=0x00
atapci0 at pci0:15:1: class=0x01018a card=0x021211d9 chip=0x02131166 rev=0xa0
hdr=0x00
ohci0 at pci0:15:2: class=0x0c0310 card=0x415515d9 chip=0x02211166 rev=0x05
hdr=0x00
isab0 at pci0:15:3: class=0x060100 card=0x415515d9 chip=0x02271166 rev=0x00
hdr=0x00
mptable:
============================================================================
===
MPTable, version 2.0.15
----------------------------------------------------------------------------
---
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000ff780
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0xe4
mode: Virtual Wire
----------------------------------------------------------------------------
---
MP Config Table Header:
physical address: 0x000f0da0
signature: 'PCMP'
base table length: 324
version: 1.4
checksum: 0x7f
OEM ID: 'AMI '
Product ID: 'GCHE '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 29
local APIC address: 0xfee00000
extended table length: 124
extended table checksum: 17
----------------------------------------------------------------------------
---
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x14 BSP, usable 15 2 7 0xbfebfbff
1 0x14 AP, usable 15 2 7 0xbfebfbff
2 0x14 AP, usable 15 2 7 0xbfebfbff
3 0x14 AP, usable 15 2 7 0xbfebfbff
--
Bus: Bus ID Type
0 PCI
1 ISA
--
I/O APICs: APIC ID Version State Address
8 0x11 usable 0xfec00000
9 0x11 usable 0xfec01000
10 0x11 usable 0xfec02000
11 0x11 usable 0xfec03000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
INT active-lo level 0 11:A 9 13
INT active-lo level 0 15:A 9 1
INT active-lo level 0 9:A 9 10
INT active-lo level 0 8:A 9 12
ExtINT active-hi edge 1 0 8 0
INT active-hi edge 1 1 8 1
INT active-hi edge 1 0 8 2
INT active-hi edge 1 3 8 3
INT active-hi edge 1 4 8 4
INT active-hi edge 1 5 8 5
INT active-hi edge 1 6 8 6
INT active-hi edge 1 7 8 7
INT active-hi edge 1 8 8 8
INT active-hi edge 1 12 8 12
INT active-hi edge 1 13 8 13
INT active-hi edge 1 14 8 14
INT active-hi edge 1 15 8 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 1 0 255 0
NMI active-hi edge 0 0:A 255 1
----------------------------------------------------------------------------
---
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0xd000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x100
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfcb00000
address range: 0x2100000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xfca00000
address range: 0x100000
--
Bus Heirarchy
bus ID: 1 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
============================================================================
===
More information about the freebsd-smp
mailing list