Compaq ProLiant DL380 odd problem
Cagle, John (ISS-Houston)
john.cagle at hp.com
Fri Apr 11 14:55:41 PDT 2003
Either Linux or Windows should work as an OS selection for FreeBSD.
> -----Original Message-----
> From: Roar Pettersen [mailto:edprp at it.uib.no]
> Sent: Friday, April 11, 2003 3:58 PM
> To: Aleksandr Melentiev
> Cc: freebsd-smp at freebsd.org
> Subject: Re: Compaq ProLiant DL380 odd problem
>
>
> Hello !
>
> > I have had an exact problem with my fxp interfaces. While
> struggling
> > for over a week, I found my solution in BIOS settings. By
> enabling PCI
> > IRQ IO-APIC mapping (that uses 24 pins interrupt describing
> instead of
> > 16) it solved my problem. See if you can find any relevant SMP
> > settings in your motherboard settings, such as IO-APIC mapping, MP
> > table specification and etc and try to play with them and
> see if that
> > helps.
>
> I know that theere is a choice of "Installed OS", this
> parameter will do something with the APIC. I have chosen Win
> 2000, and I have tried "Other OS", maybe I shall try something else.
>
> Thank you for helping me !
>
>
> --
> Med vennlig hilsen / Regards;
>
> Roar Pettersen
> Universitetet i Bergen - The University of Bergen
> Nygardsgt. 5 - N-5020 BERGEN - Norway
> Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70
> roar.pettersen at it.uib.no - IT-Avd, UiB - http://www.uib.no
More information about the freebsd-smp
mailing list