Booting Problems with PC Engines Wrap

[Larry Baird]

On Fri, Feb 11, 2005 at 04:51:52PM +0100, u0 at rootofallevil.net wrote:
> On Mon, Feb 07, 2005 at 05:23:41PM -0000, Larry Baird wrote:
> > In article <20050206003558.GB26155 at hal.btw23.de> you wrote:
> > > Hello,
> > > 
> > > I finished building my own MiniBSD for the above mentioned wrap box
> > > according to http://neon1.net/misc/minibsd.html. I just copyied more
> > > files (modules, man-pages, etc.) to my installing jail. The size for the
> > > jail is ~100Mb and I made a disk image to fit on an 265MB CF card.
> > > 
> > > After copying everything on the flash card and booting up the box, it
> > > just hangs after noticing the 'hard drive'.
> > > 
> > > ----------------------------------------------
> > > zaphod# cu -l cuaa1 -s 9600
> > > Connected
> > > PC Engines WRAP.1C v1.03
> > > 640 KB Base Memory
> > > 130048 KB Extended Memory
> > > 
> > > 01F0 Master 848A TOSHIBA THNCF256MMA                     
> > > Phys C/H/S 978/16/32 Log C/H/S 978/16/32
> > > ----------------------------------------------
> > > 
> > > I gues thats not a hardware problem as the m0n0bsd-Image
> > > (http://www.m0n0.ch/bsd) works well.
> > > Anyone hast a solution to this? 
> > Did you make look at the the WRAP docs on changes needed to run FreeBSD?
> > At a minuimum you need to make changes to loader.
> > Docs can be found here if you don't have them:
> >   http://www.pcengines.ch/wrap1c.pdf
> 
> Ok, tried that. I looked at the mentioned paragrpah in boot1.s and put
> at "ret" above it. Then did 'cd /usr/src/sys && make boot' and copyied
> boot0 to the new image. The problem is still the same.
The problem is not in boot0, it is in boot1.  Did you update boot1?

Larry

-- 
------------------------------------------------------------------------
Larry Baird                        | http://www.gta.com
Global Technology Associates, Inc. | Orlando, FL
Email: lab at gta.com                 | TEL 407-380-0220, FAX 407-380-6080