mfi(4) driver | FreeBSD 8 | Dell PERC H730

[Pallav Bose]

Hi Sibananda,
Thank you for the pointer. I was able to compile mrsas(4) for FreeBSD 8.0. Can you please tell me whether MegaCli can be used with the mrsas(4) driver? I have been mfiutil(8) and MegaCli so far along with the mfi(4) driver. Obviously mfiutil(8) cannot be used with mrsas(4).
 Thanks,Pallav 


   

  On Tuesday, September 22, 2015 2:06 AM, Sibananda Sahu <sibananda.sahu at avagotech.com> wrote:
   

 I think you can check the mrsas(4) for the same.

See here for the man page and supported controllers:
https://www.freebsd.org/cgi/man.cgi?query=mrsas&sektion=4

You can check LSI's (Avago) website for the latest available driver:
http://www.avagotech.com/products/server-storage/raid-controllers/megaraid
-sas-9380-8e#downloads

Go to the Driver section and find out the latest FreeBSD driver available.
Download and compile the code for FreeBSD 8.x.

Thanks
Sibananda Sahu


-----Original Message-----
From: owner-freebsd-scsi at freebsd.org
[mailto:owner-freebsd-scsi at freebsd.org] On Behalf Of Pallav Bose via
freebsd-scsi
Sent: Wednesday, September 16, 2015 4:46 AM
To: freebsd-scsi at freebsd.org
Subject: mfi(4) driver | FreeBSD 8 | Dell PERC H730

Hi,
Is there a port of the mfi(4) driver for FreeBSD 8.x to support Dell's
PowerEdge RAID Controller H730? It is built on the LSI SAS 3108 chip.

Thanks,Pallav
_______________________________________________
freebsd-scsi at freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"