LSI2008 controller clobbers first disk with new LSI mps driver
Jason Wolfe
nitroboost at gmail.com
Tue Feb 21 16:54:22 UTC 2012
On Mon, Feb 20, 2012 at 8:26 AM, Desai, Kashyap <Kashyap.Desai at lsi.com> wrote:
> Alternative to below approach. You can better try applying attached patch.
>
> This patch will dump necessary information from you test.
> Please send me dmesg log (same as last time verbose mps debug log)
>
> ` Kashyap
>
Kashyap,
Here is a dmesg with the patch applied.
Thank you sir,
Jason
-------------- next part --------------
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS drive E: is disk2
BIOS drive F: is disk3
BIOS drive G: is disk4
BIOS drive H: is disk5
BIOS drive I: is disk6
BIOS drive J: is disk7
BIOS drive K: is disk8
BIOS drive L: is disk9
BIOS drive M: is disk10
BIOS drive N: is disk11
KDB: current backend: ddb
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-PRERELEASE-llnw1 #0: Mon Feb 20 19:18:27 MST 2012
root at X:/usr/obj/usr/src/sys/X amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2400.09-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ee3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 51539607552 (49152 MB)
avail memory = 49666572288 (47365 MB)
ACPI APIC Table: <102811 APIC1502>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 18
cpu3 (AP): APIC ID: 20
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <SMCI > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xcc00-0xcc1f mem 0xfbbe0000-0xfbbfffff,0xfbbdc000-0xfbbdffff irq 28 at device 0.0 on pci1
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:25:90:4b:17:e4
p cib2: <ACPI PCIpci2: <ACPI PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xdc00-0xdc1f mem 0xfbce0000-0xfbcfffff,0xfbcdc000-0xfbcdffff irq 29 at device 0.0 on pci2
em1: Using MSIX interrupts with 3 vectors
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: Ethernet address: 00:25:90:4b:17:e5
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mps0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xfbd3c000-0xfbd3ffff,0xfbd40000-0xfbd7ffff irq 26 at device 0.0 on pci4
mps0: Doorbell= 0x22000000
mps0: Doorbell= 0x12000000
mps0: IOCFacts :
MsgVersion: 0x200
HeaderVersion: 0x1400
IOCNumber: 0
IOCExceptions: 0x0
MaxChainDepth: 128
WhoInit: ROM BIOS
NumberOfPorts: 1
RequestCredit: 3712
ProductID: 0x2213
IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
FWVersion= 10-0-2-0
IOCRequestFrameSize: 32
MaxInitiators: 16
MaxTargets: 126
MaxSasExpanders: 16
MaxEnclosures: 17
ProtocolFlags: 3<ScsiTarg,ScsiInit>
HighPriorityCredit: 64
MaxReplyDescriptorPostQueueDepth: 65504
ReplyFrameSize: 32
MaxVolumes: 0
MaxDevHandle: 166
MaxPersistentEntries: 128
mps0: Firmware: 10.00.02.00, Driver: 13.00.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
mps0: Doorbell= 0x12000000
mps0: IOCInit status= 0x0
mps0: PortFacts :
PortNumber: 0
PortType: 0x30
MaxPostedCmdBuffers: 128
mps0: EventReply :
EventDataLength: 0
AckRequired: 0
Event: EventChange (0xa)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 0
AckRequired: 0
Event: EventChange (0xa)
EventContext: 0x0
mps0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
pci0: <serial bus, USB> at device 26.0 (no driver attached)
pci0: <serial bus, USB> at device 26.1 (no driver attached)
pci0: <serial bus, USB> at device 26.2 (no driver attached)
pci0: <serial bus, USB> at device 26.7 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfaffc000-0xfaffffff,0xfb000000-0xfb7fffff irq 18 at device 1.0 on pci6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f,0xb080-0xb08f irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITH READ]
ata3: <ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f,0xa080-0xa08f irq 19 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel> at channel 0 on atapci1
ata4: [ITHREAD]
ata5: <ATA channel> at channel 1 on atapci1
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
uart1: [FILTER]
uart1: console (115200,n,8,1)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
qpi0: <QPI system bus> on motherboard
pcib7: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib7
ipmi1: <IPMI System Interface> on isa0
ipmi1: KCS mode found at io 0xca2 alignment 0x1 on isa
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
ipmi0: <IPMI System Interface> on isa0
device_attach: ipmi0 attach returned 16
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding enabled, default to accept, logging disabled
mps0: mpssas_startup_increment freezing simq
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 2
AckRequired: 0
Event: SasDiscovery (0x16)
EventContext: 0x0
Flags: 1<InProgress>
ReasonCode: Discovery Started
PhysicalPort: 0
DiscoveryStatus: 0
mps0: EventReply :
EventDataLength: 5
AckRequired: 0
Event: SasEnclDeviceStatusChange (0x1d)
EventContext: 0x0
EnclosureHandle: 0x1
ReasonCode: Added
PhysicalPort: 0
NumSlots: 8
StartSlot: 0
PhyBits: 0x0
mps0: EventReply :
EventDataLength: 11
AckRequired: 0
Event: SasTopologyChangeList (0x1c)
EventContext: 0x0
EnclosureHandle: 0x1
ExpanderDevHandle: 0x0
NumPhys: 8
NumEntries: 8
StartPhyNum: 0
ExpStatus: Unknown (0x0)
PhysicalPort: 0
PHY[0].AttachedDevHandle: 0x0009
PHY[0].LinkRate: 6.0Gbps (0xa0)
PHY[0].PhyStatus: PHYLinkStatusChange
PHY[1].AttachedDevHandle: 0x0009
PHY[1].LinkRate: 6.0Gbps (0xa0)
PHY[1].PhyStatus: PHYLinkStatusChange
PHY[2].AttachedDevHandle: 0x0009
PHY[2].LinkRate: 6.0Gbps (0xa0)
PHY[2].PhyStatus: PHYLinkStatusChange
PHY[3].AttachedDevHandle: 0x0009
PHY[3].LinkRate: 6.0Gbps (0xa0)
PHY[3].PhyStatus: PHYLinkStatusChange
PHY[4].AttachedDevHandle: 0x0009
PHY[4].LinkRate: 6.0Gbps (0xa0)
PHY[4].PhyStatus: PHYLinkStatusChange
PHY[5].AttachedDevHandle: 0x0009
PHY[5].LinkRate: 6.0Gbps (0xa0)
PHY[5].PhyStatus: PHYLinkStatusChange
PHY[6].AttachedDevHandle: 0x0009
PHY[6].LinkRate: 6.0Gbps (0xa0)
PHY[6].PhyStatus: PHYLinkStatusChange
PHY[7].AttachedDevHandle: 0x0009
PHY[7].LinkRate: 6.0Gbps (0xa0)
PHY[7].PhyStatus: PHYLinkStatusChange
mps0: EventReply :
EventDataLength: 5
AckRequired: 0
Event: SasEnclDeviceStatusChange (0x1d)
EventContext: 0x0
EnclosureHandle: 0x2
ReasonCode: Added
PhysicalPort: 0
NumSlots: 13
StartSlot: 0
PhyBits: 0xff
mps0: EventReply :
EventDataLength: 25
AckRequired: 0
Event: SasTopologyChangeList (0x1c)
EventContext: 0x0
EnclosureHandle: 0x2
ExpanderDevHandle: 0x9
NumPhys: 30
NumEntries: 22
StartPhyNum: 0
ExpStatus: Added (0x1)
PhysicalPort: 0
PHY[0].AttachedDevHandle: 0x0001
PHY[0].LinkRate: 6.0Gbps (0xa0)
PHY[0].PhyStatus: PHYLinkStatusChange
PHY[1].AttachedDevHandle: 0x0001
PHY[1].LinkRate: 6.0Gbps (0xa0)
PHY[1].PhyStatus: PHYLinkStatusChange
PHY[2].AttachedDevHandle: 0x0001
PHY[2].LinkRate: 6.0Gbps (0xa0)
PHY[2].PhyStatus: PHYLinkStatusChange
PHY[3].AttachedDevHandle: 0x0001
PHY[3].LinkRate: 6.0Gbps (0xa0)
PHY[3].PhyStatus: PHYLinkStatusChange
PHY[4].AttachedDevHandle: 0x0001
PHY[4].LinkRate: 6.0Gbps (0xa0)
PHY[4].PhyStatus: PHYLinkStatusChange
PHY[5].AttachedDevHandle: 0x0001
PHY[5].LinkRate: 6.0Gbps (0xa0)
PHY[5].PhyStatus: PHYLinkStatusChange
PHY[6].AttachedDevHandle: 0x0001
PHY[6].LinkRate: 6.0Gbps (0xa0)
PHY[6].PhyStatus: PHYLinkStatusChange
PHY[7].AttachedDevHandle: 0x0001
PHY[7].LinkRate: 6.0Gbps (0xa0)
PHY[7].PhyStatus: PHYLinkStatusChange
PHY[8].AttachedDevHandle: 0x0000
PHY[8].LinkRate: PHY disabled (0x10)
PHY[8].PhyStatus: PHYLinkStatusChange
PHY[9].AttachedDevHandle: 0x0000
PHY[9].LinkRate: PHY disabled (0x10)
PHY[9].PhyStatus: PHYLinkStatusChange
PHY[10].AttachedDevHandle: 0x0000
PHY[10].LinkRate: PHY disabled (0x10)
PHY[10].PhyStatus: PHYLinkStatusChange
PHY[11].AttachedDevHandle: 0x0000
PHY[11].LinkRate: PHY disabled (0x10)
PHY[11].PhyStatus: PHYLinkStatusChange
PHY[12].AttachedDevHandle: 0x000a
PHY[12].LinkRate: 6.0Gbps (0xa0)
PHY[12].PhyStatus: NewTargetAdded
PHY[13].AttachedDevHandle: 0x000b
PHY[13].LinkRate: 6.0Gbps (0xa0)
PHY[13].PhyStatus: NewTargetAdded
PHY[14].AttachedDevHandle: 0x000c
PHY[14].LinkRate: 6.0Gbps (0xa0)
PHY[14].PhyStatus: NewTargetAdded
PHY[15].AttachedDevHandle: 0x000d
PHY[15].LinkRate: 6.0Gbps (0xa0)
PHY[15].PhyStatus: NewTargetAdded
PHY[16].AttachedDevHandle: 0x000e
PHY[16].LinkRate: 6.0Gbps (0xa0)
PHY[16].PhyStatus: NewTargetAdded
PHY[17].AttachedDevHandle: 0x000f
PHY[17].LinkRate: 6.0Gbps (0xa0)
PHY[17].PhyStatus: NewTargetAdded
PHY[18].AttachedDevHandle: 0x0010
PHY[18].LinkRate: 6.0Gbps (0xa0)
PHY[18].PhyStatus: NewTargetAdded
PHY[19].AttachedDevHandle: 0x0011
PHY[19].LinkRate: 6.0Gbps (0xa0)
PHY[19].PhyStatus: NewTargetAdded
PHY[20].AttachedDevHandle: 0x0012
PHY[20].LinkRate: 6.0Gbps (0xa0)
PHY[20].PhyStatus: NewTargetAdded
PHY[21].AttachedDevHandle: 0x0013
PHY[21].LinkRate: 6.0Gbps (0xa0)
PHY[21].PhyStatus: NewTargetAdded
mps0: EventReply :
EventDataLength: 11
AckRequired: 0
Event: SasTopologyChangeList (0x1c)
EventContext: 0x0
EnclosureHandle: 0x2
ExpanderDevHandle: 0x9
NumPhys: 30
NumEntries: 8
StartPhyNum: 22
ExpStatus: Responding (0x3)
PhysicalPort: 0
PHY[22].AttachedDevHandle: 0x0014
PHY[22].LinkRate: 6.0Gbps (0xa0)
PHY[22].PhyStatus: NewTargetAdded
PHY[23].AttachedDevHandle: 0x0015
PHY[23].LinkRate: 6.0Gbps (0xa0)
PHY[23].PhyStatus: NewTargetAdded
PHY[24].AttachedDevHandle: 0x0000
PHY[24].LinkRate: PHY disabled (0x10)
PHY[24].PhyStatus: PHYLinkStatusChange
PHY[25].AttachedDevHandle: 0x0000
PHY[25].LinkRate: PHY disabled (0x10)
PHY[25].PhyStatus: PHYLinkStatusChange
PHY[26].AttachedDevHandle: 0x0000
PHY[26].LinkRate: PHY disabled (0x10)
PHY[26].PhyStatus: PHYLinkStatusChange
PHY[27].AttachedDevHandle: 0x0000
PHY[27].LinkRate: PHY disabled (0x10)
PHY[27].PhyStatus: PHYLinkStatusChange
PHY[28].AttachedDevHandle: 0x0016
PHY[28].LinkRate: 6.0Gbps (0xa0)
PHY[28].PhyStatus: NewTargetAdded
PHY[29].AttachedDevHandle: 0x0000
PHY[29].LinkRate: LinkRate Unknown (0x0)
PHY[29].PhyStatus: PHYLinkStatusChange
mps0: EventReply :
EventDataLength: 2
AckRequired: 0
Event: SasDiscovery (0x16)
EventContext: 0x0
Flags: 2<DeviceChange>
ReasonCode: Discovery Complete
PhysicalPort: 0
DiscoveryStatus: 0
mps0: disestablish config intrhook
ipmi1: IPMI device rev. 1, firmware rev. 2.08, version 2.0
ipmi1: Number of channels 2
ipmi1: Attached watchdog
mps0: (0)->(mpssas_fw_work) Working on Event: [17]
mps0: (1)->(mpssas_fw_work) Event Free: [17]
mps0: (1)->(mpssas_fw_work) Working on Event: [17]
mps0: (2)->(mpssas_fw_work) Event Free: [17]
mps0: (2)->(mpssas_fw_work) Working on Event: [17]
mps0: (3)->(mpssas_fw_work) Event Free: [17]
mps0: (3)->(mpssas_fw_work) Working on Event: [17]
mps0: (4)->(mpssas_fw_work) Event Free: [17]
mps0: (4)->(mpssas_fw_work) Working on Event: [17]
mps0: (5)->(mpssas_fw_work) Event Free: [17]
mps0: (5)->(mpssas_fw_work) Working on Event: [17]
mps0: (6)->(mpssas_fw_work) Event Free: [17]
mps0: (6)->(mpssas_fw_work) Working on Event: [17]
mps0: (7)->(mpssas_fw_work) Event Free: [17]
mps0: (7)->(mpssas_fw_work) Working on Event: [17]
mps0: (8)->(mpssas_fw_work) Event Free: [17]
mps0: (8)->(mpssas_fw_work) Working on Event: [16]
mps0: (9)->(mpssas_fw_work) Event Free: [16]
mps0: (9)->(mpssas_fw_work) Working on Event: [1d]
mps0: (10)->(mpssas_fw_work) Event Free: [1d]
mps0: (10)->(mpssas_fw_work) Working on Event: [1c]
mps0: (11)->(mpssas_fw_work) Event Free: [1c]
mps0: (11)->(mpssas_fw_work) Working on Event: [1d]
mps0: (12)->(mpssas_fw_work) Event Free: [1d]
mps0: (12)->(mpssas_fw_work) Working on Event: [1c]
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f5cdb5
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x000a> <2/0>
mps0: Target id 0x8 added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f49c01
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x000b> <2/1>
mps0: Target id 0x9 added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f6c799
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x000c> <2/2>
mps0: Target id 0xa added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033e562f5
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x000d> <2/3>
mps0: Target id 0xb added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f49a41
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x000e> <2/4>
mps0: Target id 0xc added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f5efe9
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x000f> <2/5>
mps0: Target id 0xd added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f49a11
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0010> <2/6>
mps0: Target id 0xe added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f49c71
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0011> <2/7>
mps0: Target id 0xf added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f40fb1
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0012> <2/8>
mps0: Target id 0x10 added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 5000c50033f5cdb5: 000000ff: 0000ffff: 0000000a: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(13) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f6cba9
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0013> <2/9>
mps0: Target id 0x11 added
mps0: (13)->(mpssas_fw_work) Event Free: [1c]
mps0: (13)->(mpssas_fw_work) Working on Event: [1c]
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 500304800126e3fd: 000000ff: 0000ffff: 00000016: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 5000c50033f650cd: 000000ff: 0000ffff: 00000014: 00000012: 00000000:
(13) 5000c50033f29109: 000000ff: 0000ffff: 00000015: 00000013: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f650cd
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0014> <2/10>
mps0: Target id 0x12 added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 500304800126e3fd: 000000ff: 0000ffff: 00000016: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 5000c50033f650cd: 000000ff: 0000ffff: 00000014: 00000012: 00000000:
(13) 5000c50033f29109: 000000ff: 0000ffff: 00000015: 00000013: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 5000c50033f29109
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0015> <2/11>
mps0: Target id 0x13 added
Index physical_id : phy_bits: dpm_entry_num: dev_handle: id: missing_count
(8) 500304800126e3fd: 000000ff: 0000ffff: 00000016: 00000008: 00000000:
(9) 5000c50033f49c01: 000000ff: 0000ffff: 0000000b: 00000009: 00000000:
(a) 5000c50033f6c799: 000000ff: 0000ffff: 0000000c: 0000000a: 00000000:
(b) 5000c50033e562f5: 000000ff: 0000ffff: 0000000d: 0000000b: 00000000:
(c) 5000c50033f49a41: 000000ff: 0000ffff: 0000000e: 0000000c: 00000000:
(d) 5000c50033f5efe9: 000000ff: 0000ffff: 0000000f: 0000000d: 00000000:
(e) 5000c50033f49a11: 000000ff: 0000ffff: 00000010: 0000000e: 00000000:
(f) 5000c50033f49c71: 000000ff: 0000ffff: 00000011: 0000000f: 00000000:
(10) 5000c50033f40fb1: 000000ff: 0000ffff: 00000012: 00000010: 00000000:
(11) 5000c50033f6cba9: 000000ff: 0000ffff: 00000013: 00000011: 00000000:
(12) 5000c50033f650cd: 000000ff: 0000ffff: 00000014: 00000012: 00000000:
(13) 5000c50033f29109: 000000ff: 0000ffff: 00000015: 00000013: 00000000:
(14) 500304800126e3ff: 000000ff: 0000ffff: 00000000: 0000ffff: 00000000:
mps0: SAS Address from SAS device page0 = 500304800126e3fd
mps0: Found device <4451<SmpInit,SspInit,SspTarg,SepDev>,End Device> <6.0Gbps> <0x0016> <2/0>
mps0: Target id 0x8 added
mps0: mpssas_startup_decrement releasing simq
mps0: Queueing rescan for (xpt0:mps0:0:-1:-1):
mps0: (14)->(mpssas_fw_work) Event Free: [1c]
mps0: (14)->(mpssas_fw_work) Working on Event: [16]
mps0: (15)->(mpssas_fw_work) Event Free: [16]
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
mps0: -> Sense Buffer Data : Start :
(probe8:mps0:0:8:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0
(probe8:mps0:0:8:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
mps0: -> Sense Buffer Data : End :
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0013), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000d), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000c), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0010), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000b), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000f), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0014), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000e), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0015), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0011), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000d), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0013), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0010), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000c), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000b), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0014), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000f), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0015), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000e), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0011), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0012), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0012), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
mps0: -> Sense Buffer Data : Start :
(probe8:mps0:0:8:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0
(probe8:mps0:0:8:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
mps0: -> Sense Buffer Data : End :
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0013), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0010), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000d), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0015), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000c), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0014), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0011), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000f), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000b), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000e), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0013), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0010), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0015), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000d), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000c), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0014), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000f), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0011), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000b), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x000e), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0012), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
mps0: handle(0x0012), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(good)(0x00), scsi_state( )(0x00)
ses0 at mps0 bus 0 scbus0 target 8 lun 0
ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
ses0: 600.000MB/s transfers
ses0: Command Queueing enabled
ses0: SCSI-3 SES Device
da0 at mps0 bus 0 scbus0 target 9 lun 0
da0: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
mps0: Completing rescan for (xpt0:mps0:0:-1:-1):
da2 at mps0 bus 0 scbus0 target 11 lun 0
da2: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
mps0: handle(0x0016), ioc_status(scsi data underrun)(0x0045),
mps0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
mps0: -> Sense Buffer Data : Start :
(xpt0:mps0:0:8:0): SERVICE ACTION IN(16). CDB: 9e 10 0 0 0 0 0 0 0 0 0 0 0 d 0 0
(xpt0:mps0:0:8:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
mps0: -> Sense Buffer Data : End :
da1 at mps0 bus 0 scbus0 target 10 lun 0
da1: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da3 at mps0 bus 0 scbus0 target 12 lun 0
da3: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da4 at mps0 bus 0 scbus0 target 13 lun 0
da4: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da5 at mps0 bus 0 scbus0 target 14 lun 0
da5: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da6 at mps0 bus 0 scbus0 target 15 lun 0
da6: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da7 at mps0 bus 0 scbus0 target 16 lun 0
da7: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da8 at mps0 bus 0 scbus0 target 17 lun 0
da8: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da8: 600.000MB/s transfers
da8: Command Queueing enabled
da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da9 at mps0 bus 0 scbus0 target 18 lun 0
da9: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da10 at mps0 bus 0 scbus0 target 19 lun 0
da10: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da10: 600.000MB/s transfers
da10: Command Queueing enabled
da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
ROOT MOUNT ERROR:
If you have invalid mount options, reboot, and first try the following from
the loader prompt:
set vfs.root.mountfrom.options=rw
and then remove invalid mount options from /etc/fstab.
Loader variables:
vfs.root.mountfrom=ufs:/dev/da0s1a
vfs.root.mountfrom.options=rw
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:/dev/da0s1a
eg. cd9660:/dev/acd0
This is equivalent to: mount -t cd9660 /dev/acd0 /
? List valid disk boot devices
<empty line> Abort manual input
mountroot> mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: EventReply :
EventDataLength: 1
AckRequired: 0
Event: SasBroadcastPrimitive (0x17)
EventContext: 0x0
mps0: (15)->(mpssas_fw_work) Working on Event: [17]
mps0: (16)->(mpssas_fw_work) Event Free: [17]
mps0: (16)->(mpssas_fw_work) Working on Event: [17]
mps0: (17)->(mpssas_fw_work) Event Free: [17]
mps0: (17)->(mpssas_fw_work) Working on Event: [17]
mps0: (18)->(mpssas_fw_work) Event Free: [17]
mps0: (18)->(mpssas_fw_work) Working on Event: [17]
mps0: (19)->(mpssas_fw_work) Event Free: [17]
mps0: (19)->(mpssas_fw_work) Working on Event: [17]
mps0: (20)->(mpssas_fw_work) Event Free: [17]
mps0: (20)->(mpssas_fw_work) Working on Event: [17]
mps0: (21)->(mpssas_fw_work) Event Free: [17]
mps0: (21)->(mpssas_fw_work) Working on Event: [17]
mps0: (22)->(mpssas_fw_work) Event Free: [17]
mps0: (22)->(mpssas_fw_work) Working on Event: [17]
mps0: (23)->(mpssas_fw_work) Event Free: [17]
More information about the freebsd-scsi
mailing list