(probe30:iir0:2:0:0): inquiry data fails comparison at DV1 step

[AndrewV]

Scott Long-2 wrote:
> 
> Scott Long wrote:
>> Julien wrote:
>>> Hello,
>>>
>>> I'm using FreeBSD 7.0 with an Intel SRCZCR
>>> (http://support.intel.com/support/motherboards/server/srczcr/) RAID
>>> controller. The machine is configured as the following:
>>> - RAID 1 + one spare disk where the system is installed
>>> - RAID 5 + one spare disk mounted under /usr
>>>
>>> The disks are from Seagate (146 GB, U320).
>>> It seems to work fine (it's a fresh install) except that I have this
>>> message on boot :
>>>
>>> (probe30:iir0:2:0:0): inquiry data fails comparison at DV1 step
>>>
> 
> Oops, my apologies, so many drivers, so little brainpower.  This problem
> may have been fixed back in January, but only in 8-CURRENT.  I'll look
> into merging the fix into FreeBSD 7.
> 
> 

  Any chance to see this fix in upcoming release? We also have the same
problem:

Waiting 3 seconds for SCSI devices to settle
(probe131:ahd0:0:5:0): inquiry data fails comparison at DV1 step
(probe131:ahd0:0:5:0): inquiry data fails comparison at DV1 step
(probe131:ahd0:0:5:0): inquiry data fails comparison at DV1 step
(probe131:ahd0:0:5:0): inquiry data fails comparison at DV1 step
(probe131:ahd0:0:5:0): inquiry data fails comparison at DV1 step
...
a5 at ahd0 bus 0 target 5 lun 0
da5: <IFT IFT-7200 0145> Fixed Direct Access SCSI-4 device
da5: 6.600MB/s transfers (16bit)
da5: Command Queueing Enabled

  6.6 MB/s is too slow these days :(( Working good with 6.x, damaged in 7.x
________
        ANDY
-- 
View this message in context: http://www.nabble.com/%28probe30%3Aiir0%3A2%3A0%3A0%29%3A-inquiry-data-fails-comparison-at-DV1-step-tp16445635p19547250.html
Sent from the freebsd-scsi mailing list archive at Nabble.com.