PERC6/i/e cli

Danny Braniss danny at cs.huji.ac.il
Tue Sep 16 14:40:01 UTC 2008


> Greetings,
> 
> Danny Braniss wrote:
> > hi, mfi is ok,
> >
> > mfi0 at pci0:1:0:0:        class=0x010400 card=0x1f0c1028 chip=0x00601000 
> > rev=0x04 hdr=0x00
> >     vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
> >     device     = 'SAS1078 PCI-X Fusion-MPT SAS'
> >     class      = mass storage
> >     subclass   = RAID
> >   
> 
> mfi0 at pci0:1:0:0:        class=0x010400 card=0x1f0c1028 chip=0x00601000 
> rev=0x04 hdr=0x00
>     vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
>     device     = 'SAS1078 PCI-X Fusion-MPT SAS'
>     class      = mass storage
>     subclass   = RAID
> (exactly the same model)
> and linux-megacli-1.01.40_1 works well with it. (freebsd 7 - amd64)
> 
> If you search the mailing lists you will find that similar problems can 
> happen if
> modules are not loaded in the proper way.
> 
> I have in /boot/loader.conf:
> linux_load="YES"
> mfi_linux_load="YES"
> 
> which loads:
> linux.ko
> mfi_linux.ko
> and also: (because of fstab)
> linprocfs.ko
> linsysfs.ko
> 
> Then you can put in your periodic.conf - daily_status_mfi_raid_enable="YES"
> and you will receive in your daily mails something like:
> 
> Virtual Drive Information:
> VD  DRV RLP RLS RLQ STS    SIZE        STATE         NAME
> 0   2   1   0   0   64kB   139392MB    Optimal       
> 
> Ah and btw I think it was mandatory to have compat.linux.osrelease=2.6.12
> (2.6.16 works too but you have to fix the script to not complain - i 
> think the port is still not fixed?)
> 

Ah, the order does affect the result!
great, it now works for me too.
thanks!

> Best Wishes,
> Stefan Lambrev
> ICQ# 24134177
> 




More information about the freebsd-scsi mailing list