PERC6/i/e cli

Danny Braniss danny at cs.huji.ac.il
Tue Sep 16 13:14:12 UTC 2008


hi, mfi is ok,

mfi0 at pci0:1:0:0:        class=0x010400 card=0x1f0c1028 chip=0x00601000 
rev=0x04 hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS1078 PCI-X Fusion-MPT SAS'
    class      = mass storage
    subclass   = RAID
mfi1 at pci0:10:0:0:       class=0x010400 card=0x1f0a1028 chip=0x00601000 
rev=0x04 hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS1078 PCI-X Fusion-MPT SAS'
    class      = mass storage
    subclass   = RAID

...
mfi0: <Dell PERC 6> port 0xec00-0xecff mem 0xfc980000-0xfc9bffff,0xfc940000-0xf
c97ffff irq 16 at device 0.0 on pci1
mfi0: Megaraid SAS driver Ver 2.00 
mfi0: [ITHREAD]
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci10: <ACPI PCI bus> on pcib8
mfi1: <Dell PERC 6> port 0xdc00-0xdcff mem 0xfc780000-0xfc7bffff,0xfc740000-0xf
c77ffff irq 16 at device 0.0 on pci10
mfi1: Megaraid SAS driver Ver 2.00 
mfi1: [ITHREAD]
...
mfid0: <MFI Logical Disk> on mfi0
mfid0: 953344MB (1952448512 sectors) RAID volume '' is optimal
mfid1: <MFI Logical Disk> on mfi1
mfid1: 13346816MB (27334279168 sectors) RAID volume '' is optimal

but megacli does not talk to it, am I missing something, or is there another
cli that does work? 

thanks,
	danny




More information about the freebsd-scsi mailing list