virtualbox-ose port fails (12.1)
Trond Endrestøl
trond.endrestol at ximalas.info
Fri May 15 19:17:18 UTC 2020
On Fri, 15 May 2020 21:02+0200, Christoph Kukulies wrote:
> > Am 15.05.2020 um 20:39 schrieb Trond Endrestøl <trond.endrestol at ximalas.info>:
> >
> > On Fri, 15 May 2020 20:18+0200, Christoph Kukulies wrote:
> >
> >>> Am 15.05.2020 um 19:15 schrieb Mario Lobo <lobo at bsd.com.br>:
> >>>
> >>> On Fri, May 15, 2020 at 8:57 AM Christoph Kukulies <kuku at kukulies.org <mailto:kuku at kukulies.org>>
> >>> wrote:
> >>>>
> >>>>> Am 15.05.2020 um 11:18 schrieb Trond Endrestøl <
> >>>> trond.endrestol at ximalas.info <mailto:trond.endrestol at ximalas.info>>:
> >>>>>
> >>>>> On Fri, 15 May 2020 10:40+0200, Christoph Kukulies wrote:
> >>>>>
> >>>>>> I knew why I initially began compiling the virtual box. Then I got the
> >>>> advice here to use the pckg. Trying that I ended up in a failing
> >>>> (panicking) vboxvfs.ko module.
> >>>>>>
> >>>>
> >>> [snip...]
> >>>
> >>>>>>
> >>>>>> Stop.
> >>>>>> make: stopped in /usr/ports/emulators/virtualbox-ose
> >>>>>> #
> >>>>>>
> >>>>>> I’m wondering anyway why two python versions (2 and 3) have to be built
> >>>> . But that left aside, how do I now get around this obstacle?
> >>>>>
> >>>>> According to ports/Mk/bsd.default-versions.mk, Python 3.7 is both the
> >>>>> default Python version and the default Python3 version.
> >>>>>
> >>>>> Have you locked the Pythons to 3.6 in /etc/make.conf or in an
> >>>>> equivalent file such as /usr/local/etc/poudriere.d/make.conf?
> >>>>
> >>>> Thanks. Yes, I had some of these tools installed as pkg and already
> >>>> deleted them and the correct tools got built out of the ports tree.
> >>>>
> >>>>> Do you mix prebuilt packages and packages built yourself?
> >>>>>
> >>>>> You should recompile devel/py-setuptools at py36 so that it abstains from
> >>>>> creating the /usr/local/bin/easy_install symlink.
> >>>>
> >>>> Done so, thanks.
> >>>>
> >>> Doesn't Vbox require python 2.7 to be built?
> >>>
> >>> I get a warning about python 2.7 everytime I build VBox.
> >>>
> >>> I have this in make.conf:
> >>>
> >>> DEFAULT_VERSIONS=perl5=5.30 linux=c7_64 ssl=base python=3.7 python2=2.7
> >>> python3=3.7
> >>>
> >>> --
> >>> Mario Lobo
> >>
> >> In this vein my vbox make stops at the next obstacle:
> >> ===> qt5-gui-5.13.0_1 depends on shared library: libharfbuzz.so - found (/usr/local/lib/libharfbuzz.so)
> >> ===> qt5-gui-5.13.0_1 depends on shared library: libinput.so - not found
> >> ===> libinput-1.12.6_1 needs Python 3.4 at least, but 2.7 was specified.
> >> *** Error code 1
> >>
> >> Stop.
> >> make[5]: stopped in /usr/ports/x11/libinput
> >> *** Error code 1
> >>
> >> Stop.
> >> make[4]: stopped in /usr/ports/x11-toolkits/qt5-gui
> >> *** Error code 1
> >>
> >> Stop.
> >> make[3]: stopped in /usr/ports/x11-toolkits/qt5-declarative
> >> *** Error code 1
> >>
> >> Stop.
> >> make[2]: stopped in /usr/ports/devel/qt5-linguisttools
> >> *** Error code 1
> >>
> >> Stop.
> >> make[1]: stopped in /usr/ports/emulators/virtualbox-ose
> >> *** Error code 1
> >>
> >> Stop.
> >> make: stopped in /usr/ports/emulators/virtualbox-ose
> >> #
> >
> > lang/python controls what the /usr/local/bin/python symlink points to.
> > It might still be pointing to Python 2.7 when it should be pointing to
> > Python 3.7.
> >
> > You have two options:
> >
> > 1. Recreate and reinstall lang/python.
> > 2. Change the /usr/local/bin/python symlink yourself.
>
>
> Thanks. But I don’t have /usr/local/bin/python:
I see. Maybe you could try "ln -s python3.7 /usr/local/bin/python"
just to see if it helps. If not, then I'm out of suggestions.
> lrwxr-xr-x 1 root wheel 11 May 15 11:40 pybabel -> pybabel-3.6
> -rwxr-xr-x 1 root wheel 384 May 15 11:40 pybabel-3.6
> -rwxr-xr-x 1 root wheel 84 May 15 10:04 pydoc2.7
> -rwxr-xr-x 1 root wheel 84 May 15 10:22 pydoc3.6
> -rwxr-xr-x 1 root wheel 84 Apr 23 03:20 pydoc3.7
> lrwxr-xr-x 1 root wheel 14 May 15 11:44 pygmentize -> pygmentize-3.6
> -rwxr-xr-x 1 root wheel 399 May 15 11:44 pygmentize-3.6
> -r-xr-xr-x 1 root wheel 15192 May 15 10:03 python2.7
> -r-xr-xr-x 1 root wheel 1769 May 15 10:04 python2.7-config
> -r-xr-xr-x 2 root wheel 15392 May 15 10:21 python3.6
> lrwxr-xr-x 1 root wheel 17 May 15 10:22 python3.6-config -> python3.6m-config
> -r-xr-xr-x 2 root wheel 15392 May 15 10:21 python3.6m
> -r-xr-xr-x 1 root wheel 3127 May 15 10:22 python3.6m-config
> -r-xr-xr-x 2 root wheel 15208 Apr 23 03:20 python3.7
> lrwxr-xr-x 1 root wheel 17 Apr 23 03:20 python3.7-config -> python3.7m-config
> -r-xr-xr-x 2 root wheel 15208 Apr 23 03:20 python3.7m
> -r-xr-xr-x 1 root wheel 2936 Apr 23 03:20 python3.7m-config
> -rwxr-xr-x 1 root wheel 441 May 15 10:22 pyvenv-3.6
> -rwxr-xr-x 1 root wheel 441 Apr 23 03:20 pyvenv-3.7
>
> > The same advice applies to lang/python2 and lang/python3, if any of
> > these are installed.
> >
> > Just a friendly piece of advice:
> >
> > Explore the possible use of ports-mgmt/poudriere and ports-mgmt/synth.
> > Even an old fart like myself have realised their potential and
> > practical value.
> >
> > They both build each package in full isolation from the running system
> > and from each other. They can also build packages in parallel.
> >
> > synth is more straight forward of the two but requires an Ada
> > compiler. Its /usr/local/etc/synth/synth.ini has self-explanatory
> > parameters for each profile you create.
> >
> > poudriere requires you to set ALLOW_MAKE_JOBS=yes and PARALLEL_JOBS=6
> > in /usr/local/etc/poudriere.conf, and MAKE_JOBS_NUMBER=4 in
> > /usr/local/etc/poudriere.d/make.conf, in order to achieve reasonable
> > parallelism.
> >
> > 6 and 4 are the values chosen by synth when auto-configured on an
> > 8-core system, yielding a 300 % load on the CPUs in the worst case.
> > Adjust these values to suit your system and/or taste.
>
> # dmesg | head
> ---<<BOOT>>---
> Copyright (c) 1992-2019 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 12.1-RELEASE GENERIC amd64
> FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
> VT(vga): resolution 640x480
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (1995.64-MHz K8-class CPU)
> Origin="AuthenticAMD" Id=0x20fb1 Family=0xf Model=0x2b Stepping=1
> #
>
>
> I’m afraid there is not much to parallelize :( (with a dual core)
Incidently, I'm playing with an old Dell Latitude D531 at $WORK. It
has almost the same processor as your system. It took me 84 hours
building stable/11 from scratch. synth ran for 8 days and 17 hours
while building in excess of 700 packages. synth initially ran in a 2x2
configuration, but I'm now experimenting running it as 1x2. I have two
separate ccache instances, one for each of base and localbase, at
least it speeds up autoconf and friends.
--
Trond.
More information about the freebsd-questions
mailing list