Reset xorg using lumina desktop
Antonio Olivares
olivares14031 at gmail.com
Mon Aug 24 13:37:58 UTC 2020
Dear Polytropon, Manish et all who have provided suggestions. I tried
the Xorg -configure approach, when testing the screen is just blank.
The xorg.conf.new file, the output from xrandr will be attached.
olivares at e154-1$ xrandr
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 connected primary 1600x900+0+0 (normal left inverted right x axis
y axis) 434mm x 236mm
1600x900 59.98*+
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
olivares at e154-1$
olivares at e154-1$ su -
Password:
root at e154-1:~ # cat xorg.conf.new
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/share/fonts/misc/"
FontPath "/usr/local/share/fonts/TTF/"
FontPath "/usr/local/share/fonts/OTF/"
FontPath "/usr/local/share/fonts/Type1/"
FontPath "/usr/local/share/fonts/100dpi/"
FontPath "/usr/local/share/fonts/75dpi/"
FontPath "catalogue:/usr/local/etc/X11/fontpath.d"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "kmsdev" # <str>
#Option "ShadowFB" # [<bool>]
#Option "AccelMethod" # <str>
#Option "PageFlip" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "DoubleShadow" # [<bool>]
#Option "Atomic" # [<bool>]
Identifier "Card0"
Driver "modesetting"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
root at e154-1:~ #
kld_list="/boot/modules/i915kms.ko"
root at e154-1:~ # pciconf -lvbce
hostb0 at pci0:0:0:0: class=0x060000 card=0x04ad1028 chip=0x01008086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '2nd Generation Core Processor Family DRAM Controller'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 12) Intel cap 0 version 1
PCI errors = Received Master-Abort
vgapci0 at pci0:0:2:0: class=0x030000 card=0x04ad1028 chip=0x01028086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '2nd Generation Core Processor Family Integrated Graphics Controller'
class = display
subclass = VGA
bar [10] = type Memory, range 64, base 0xe0c00000, size 4194304, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xd0000000, size
268435456, enabled
bar [20] = type I/O Port, range 32, base 0x3000, size 64, enabled
cap 05[90] = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
cap 13[a4] = PCI Advanced Features: FLR TP
none0 at pci0:0:22:0: class=0x078000 card=0x04ad1028 chip=0x1c3a8086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family MEI Controller'
class = simple comms
bar [10] = type Memory, range 64, base 0xe1ab0000, size 16, enabled
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[8c] = MSI supports 1 message, 64 bit
uart2 at pci0:0:22:3: class=0x070002 card=0x04ad1028 chip=0x1c3d8086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family KT Controller'
class = simple comms
subclass = UART
bar [10] = type I/O Port, range 32, base 0x30e0, size 8, enabled
bar [14] = type Memory, range 32, base 0xe1a90000, size 4096, enabled
cap 01[c8] = powerspec 3 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
em0 at pci0:0:25:0: class=0x020000 card=0x047e1028 chip=0x15028086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82579LM Gigabit Network Connection (Lewisville)'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xe1a00000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xe1a80000, size 4096, enabled
bar [18] = type I/O Port, range 32, base 0x3080, size 32, enabled
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 13[e0] = PCI Advanced Features: FLR TP
ehci0 at pci0:0:26:0: class=0x0c0320 card=0x04ad1028 chip=0x1c2d8086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xe1a70000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
hdac0 at pci0:0:27:0: class=0x040300 card=0x04ad1028 chip=0x1c208086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family High Definition Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xe1a60000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[70] = PCI-Express 1 root endpoint max data 128(128) FLR NS
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = Root Complex Link Declaration 1
pcib1 at pci0:0:28:0: class=0x060400 card=0x04ad1028 chip=0x1c108086
rev=0xb4 hdr=0x01
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128)
link x0(x1) speed 0.0(5.0) ASPM L0s/L1(L0s/L1)
slot 0 power limit 100 mW
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x04ad1028
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib2 at pci0:0:28:2: class=0x060400 card=0x04ad1028 chip=0x1c148086
rev=0xb4 hdr=0x01
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128)
link x0(x1) speed 0.0(5.0) ASPM L0s/L1(L0s/L1)
slot 2 power limit 100 mW HotPlug(empty) surprise
cap 05[80] = MSI supports 1 message enabled with 1 message
cap 0d[90] = PCI Bridge card=0x04ad1028
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ehci1 at pci0:0:29:0: class=0x0c0320 card=0x04ad1028 chip=0x1c268086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xe1a50000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
pcib3 at pci0:0:30:0: class=0x060401 card=0x04ad1028 chip=0x244e8086
rev=0xa4 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
cap 0d[50] = PCI Bridge card=0x04ad1028
isab0 at pci0:0:31:0: class=0x060100 card=0x04ad1028 chip=0x1c4c8086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Q65 Express Chipset LPC Controller'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: AMT, 4 PCI-e x1 slots
ahci0 at pci0:0:31:2: class=0x010601 card=0x04ad1028 chip=0x1c028086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI
Controller'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0x30d0, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x30c0, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x30b0, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x30a0, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x3060, size 32, enabled
bar [24] = type Memory, range 32, base 0xe1a40000, size 2048, enabled
cap 05[80] = MSI supports 1 message enabled with 1 message
cap 01[70] = powerspec 3 supports D0 D3 current D0
cap 12[a8] = SATA Index-Data Pair
cap 13[b0] = PCI Advanced Features: FLR TP
none1 at pci0:0:31:3: class=0x0c0500 card=0x04ad1028 chip=0x1c228086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family SMBus Controller'
class = serial bus
subclass = SMBus
bar [10] = type Memory, range 64, base 0xe1a30000, size 256, enabled
bar [20] = type I/O Port, range 32, base 0x3040, size 32, enabled
root at e154-1:~ #
Maybe what I should do is refresh the question, How do I reset the
screen on Lumina desktop and not xorg. Xorg is working. I just want
the screen back to normal because I am not using the epson projector
anymore. That is what I should have said.
Thanks for all helping me and advising me.
Best Regards,
Antonio
On Sun, Aug 23, 2020 at 3:27 AM Polytropon <freebsd at edvax.de> wrote:
>
> On Sun, 23 Aug 2020 04:14:17 +0530, Manish Jain wrote:
> >
> >
> > On 2020-08-23 02:57, Antonio Olivares wrote:
> > > Dear kind FreeBSD users,
> > >
> > > I am running FreeBSD using lumina. I was using two screens, one with HDMI
> > > and one with VGA at school. Since learning is now online, I am using only
> > > HDMI now, but my screen only remembers new setting. I have tried checking
> > > /etc/X11/xorg.conf but it is not present. I try screen configuration, but
> > > cannot reset it to only Monitor with HDMI output.
> > >
> > > How can I reset it so I can just have fresh desktop with all icons on the
> > > screen?
> > >
> > > If you need output from xrandr, I can send it in on Monday. When teaching
> > > online and using Google classroom, the microphone was muted, I started
> > > using telefono to use and connect with it. My sister got for me a
> > > Bluetooth device, but that will be a challenge to get working.
> > >
> > > I appreciate help/advice and suggestions to fix the screen.
> >
> > You have not mentioned what graphics chip you are using.
> >
> > Perhaps creating a new xorg.conf might take care of your problem.
> > Can you try booting FreeBSD in text mode and run the following:
> >
> > 1) Xorg -configure
> > 2) mv xorg.conf.new /etc/X11/xorg.conf
> > 3) reboot
>
> Even though this is technically correct, it usually is no longer
> needed. X's auto-magic will do everything on its own, without
> a configuration file.
>
> Also, step 2 should be:
>
> mv xorg.conf.new /usr/local/etc/X11/xorg.conf
>
> This is the "new" location of the xorg.conf file according to
> the hierarchy layout concept that all 3rd party configuration
> files should reside in /usr/local/etc, and X is not part of
> the OS, therefore not deserving a file in /etc - even though
> this location is still supported.
>
> A configuration file, or a partial configuration file, as
> mentioned elsewhere, still can be fully justified, especially
> when you need to tell X to do something the auto-magic didn't
> get right (or which it did "know better than you"), for example
> if you want to force a specific display or screen size
> ("resolution").
>
> Such files go to the /usr/local/etc/X11/xorg.conf.d/ directory.
>
> By the way, certain aspects of the display configuration for
> "internal / external" can often be configured in the BIOS / UEFI
> setup (for laptops, that is).
>
>
>
>
> Oh, and FreeBSD's "text mode", with vt, isn't any longer a
> text mode, it's just a non-X graphics mode. ;-)
>
>
>
> --
> Polytropon
> Magdeburg, Germany
> Happy FreeBSD user since 4.0
> Andra moi ennepe, Mousa, ...
More information about the freebsd-questions
mailing list