dhclient question

[Kurt Buff - GSEC, GCIH]

On Mon, May 20, 2019 at 2:56 PM Martin Paredes <mapsware at prodigy.net.mx> wrote:
>
> El Mon, 13 May 2019 20:44:06 -0700
> "Kurt Buff - GSEC, GCIH" <kurt.buff at gmail.com> escribió:
> > Oh, and BTW, the default route doesn't change either
> >
> > On Mon, May 13, 2019 at 8:34 PM Kurt Buff - GSEC, GCIH
> > <kurt.buff at gmail.com> wrote:
> >
> > > Here's the output of ifconfig - the bolded line is the address from
> > > the previous network, and the one after that is the address from
> > > the current network
> > >
> > > Kurt:
> > >
> > > em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0
> > > mtu 1500
> > >
> > > options=81009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,VLAN_HWFILTER>
> > >         ether 00:0c:29:9c:f6:a1
> > >         inet6 fe80::20c:29ff:fe9c:f6a1%em0 prefixlen 64 scopeid 0x1
> > >         *inet 192.168.1.19 netmask 0xffffff00 broadcast
> > > 192.168.1.255* inet 172.31.255.60 netmask 0xffffff00 broadcast
> > > 172.31.255.255 media: Ethernet autoselect (1000baseT <full-duplex>)
> > >         status: active
> > >         nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
> > >
>
> service netif restart

You would think that would do it, but it didn't work for me either.

I'll try again to make sure, however.

Kurt