keysym list for French chars

Ralf Mardorf ralf.mardorf at
Sun Sep 30 10:32:04 UTC 2018

On Sun, 30 Sep 2018 12:11:31 +0200, Ralf Mardorf wrote:
>On Sun, 30 Sep 2018 10:41:07 +0200, Matthias Apitz wrote:
>>Any ideas about some physical solution, some adhesive which can be
>for my Atari ST I most likely used Letraset or less likely Mecarnormaor
>other rub-on signs and IIRC a matt enamel spray can from a DIY market,
>to get signs that were needed for usage with a hardware 80286 emulator
>and IIRC DR-DOS. It was (still is) perfect, but the signs are not on
>top of the keys, they are on front of the keys. A lot of people never
>learned how to correctly use a spray can, but I did. If the keys should
>be removable and if they should have a visible front, then my
>recommendation is to use rub-on signs, on front and not on top of the
>keys, but first learn how to correctly use a spray can, IOW where to
>start and where to stop spraying, while moving the can and how to move
>the can to spray thin films.

PS: To avoid a misunderstanding, I used clear matt enamel spray as
fixative, I did not use the rub-on signs as a mask for coloured enamel
spray. Btw. I used black rub-on signs on grey keys. Since the kind of
plastic used for the keys could differ and the quality especially of
coloured, e.g. white rub-on signs nowadays might differ, too, it might
be important to make a test firs, e.g. inside the hollow space of a key.

More information about the freebsd-questions mailing list