Freebsd 11 STABEL and asus GL503VD skylake (Republic of Gamers) laptop

Mario Lobo lobo at bsd.com.br
Sun May 27 20:51:34 UTC 2018


Hi;

FreeBSD Lap 11.2-PRERELEASE r333311: Mon May  7

I got almost all of it working, (graphics with drm-next is perfect) except
for the track pad and the SD card reader.

Here is the list of non-driver devices:

none0 at pci0:0:8:0:       class=0x088000 card=0x1bb01043 chip=0x19118086
rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core
Processor Gaussian Mixture Model'
    class      = base peripheral

none1 at pci0:0:20:2:      class=0x118000 card=0x1bb01043 chip=0xa1318086
rev=0x31 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-H Thermal subsystem'
    class      = dasp

none3 at pci0:0:22:0:      class=0x078000 card=0x1bb01043 chip=0xa13a8086
rev=0x31 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-H CSME HECI'
    class      = simple comms (possibly the trackpad)

none4 at pci0:0:31:2:      class=0x058000 card=0x1bb01043 chip=0xa1218086
rev=0x31 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-H PMC'
    class      = memory

none5 at pci0:3:0:0:       class=0xff0000 card=0x202f1043 chip=0x522910ec
rev=0x01 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTS5229 PCI Express Card Reader'


According to some reports, the track pad is supposed to be elantech but I
already have these on loader.conf

hw.psm.synaptics_support="1"
hw.psm.elantech_support="1"
hw.psm.trackpoint_support="1"

but the psm0 device doesn't show up. I can use a usb mouse without problems
but it would be nice to get the track pad to work.

As for the card reader, i found a PR to port openbsd's rtlx driver that
supports this chip but that was as far as I could go.

Except for the card reader (which shows up explicitly on the description),
I can figure out what the other devices are for.

Would anyone have any suggestion on what direction I should take?

Thanks,

-- 
Mario Lobo
http://www.mallavoodoo.com.br
FreeBSD since version 2.2.8 [not Pro-Audio.... YET!!]


More information about the freebsd-questions mailing list