freebsd-questions Digest, Vol 735, Issue 4

ldak mail ldakmail at gmail.com
Thu Jul 12 06:34:35 UTC 2018


Unsubscribe

On Thu, 12 Jul 2018, 00:26 , <freebsd-questions-request at freebsd.org> wrote:

> Send freebsd-questions mailing list submissions to
>         freebsd-questions at freebsd.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> or, via email, send a message with subject or body 'help' to
>         freebsd-questions-request at freebsd.org
>
> You can reach the person managing the list at
>         freebsd-questions-owner at freebsd.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of freebsd-questions digest..."
>
>
> Today's Topics:
>
>    1. Re: backspace not working with mg (Kevin P. Neal)
>    2. Help with an Urgent Matter (David Johnson)
>    3. Re: Help with an Urgent Matter (Paul Pathiakis)
>    4. Re: Help with an Urgent Matter (Norman Gray)
>    5. Why can I not get amd64/11.1-RELEASE? (James B. Byrne)
>    6. Re: Why can I not get amd64/11.1-RELEASE? (Philipp Vlassakakis)
>    7. Re: Why can I not get amd64/11.1-RELEASE? (James B. Byrne)
>    8. Disk/ZFS activity crash on 11.2-STABLE (Jim Long)
>    9. Re: [commercial] sendmail setup request (RW)
>   10. recovering an overwritten zfs partition (The Doctor)
>   11. Re: Help with an Urgent Matter (Polytropon)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 11 Jul 2018 13:30:22 -0400
> From: "Kevin P. Neal" <kpn at neutralgood.org>
> To: Mayuresh Kathe <mayuresh at kathe.in>
> Cc: freebsd-questions at freebsd.org
> Subject: Re: backspace not working with mg
> Message-ID: <20180711173022.GA61776 at neutralgood.org>
> Content-Type: text/plain; charset=us-ascii
>
> On Mon, Jul 09, 2018 at 06:45:15AM +0000, Mayuresh Kathe wrote:
> > my backspace key functions just right with 'ee' but not under "mg".
> > the system just beeps and the cursor just sits where it was.
> > i am a "vi" guy, but now am migrating to "mg" because the nature
> > of work for me going forward would involve a "lisp-1" system and
> > "mg" provides nice parentheses matching feature without the bloat
> > i would have to tolerate if using "gnu emacs".
>
> In vi, does the "%" key not do what you want? I use it all the time to
> bounce the cursor between open and close parens.
>
> --
> Kevin P. Neal                                http://www.pobox.com/~kpn/
> "14. Re-reading No. 13, I realize that it's quite possible I'm losing my
> mind. I'm glad that for the most part I'm not aware it's happening."
>   -- from "20 things I'm thankful for": Fortune, Nov 29, 2004, page 230
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 11 Jul 2018 12:08:14 -0700
> From: David Johnson <djtherenovator at gmail.com>
> To: freebsd-questions at freebsd.org
> Subject: Help with an Urgent Matter
> Message-ID:
>         <
> CAGX9N-MnE625yqJ5pkn23YoD5BGJ7o6BOC2nRWKUuhmmT2nHBA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I have found a FreeBSD OS embedded in my Mac which is fully implemented.
> I followed the instructions and did the following from your website
> documentation:
>
> in terminal;  shutdown -k +1 "message"
>
> I get the following:
>
> System shutdown time has arrived
>
> but you'll have to do it yourself
>
>
>  I am not sure what to do at this prompt....what does 'do it yourself
> mean', and what do I type to complete the process??
>
>
> Also in addition to the above question....
>
> does the fact that those commands do actually work mean that I am correct
> in
>
> believing that there is a FreeBSD OS embedded in my system?
>
>
> Thank You,
>
> Free BSD
>
>
> Lamb Agency
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 11 Jul 2018 19:23:06 +0000 (UTC)
> From: Paul Pathiakis <pathiaki2 at yahoo.com>
> To: freebsd-questions at freebsd.org, David Johnson
>         <djtherenovator at gmail.com>
> Subject: Re: Help with an Urgent Matter
> Message-ID: <1985397816.2919749.1531336986787 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
>  1.2.?Welcome to FreeBSD!
>
> |
> |
> |  |
> 1.2.?Welcome to FreeBSD!
>
>
>  |
>
>  |
>
>  |
>
>
> David,
>
> As you can see, Apple borrows a lot from FreeBSD.? The co-joined operating
> system is called DarwinOS which is the foundation for the Apple Mac OSX
> operating system.
> Not having dealt with a Mac for years, I'm guessing about your issue.? If
> your command returns a prompt after it runs and spits out that message, the
> shutdown command may have been altered.
> At the prompt, try a simple 'halt' command.? That should shut the machine
> down.
> P.
>
>     On Wednesday, July 11, 2018, 3:09:31 PM EDT, David Johnson <
> djtherenovator at gmail.com> wrote:
>
>  I have found a FreeBSD OS embedded in my Mac which is fully implemented.
> I followed the instructions and did the following from your website
> documentation:
>
> in terminal;? shutdown -k +1 "message"
>
> I get the following:
>
> System shutdown time has arrived
>
> but you'll have to do it yourself
>
>
>  I am not sure what to do at this prompt....what does 'do it yourself
> mean', and what do I type to complete the process??
>
>
> Also in addition to the above question....
>
> does the fact that those commands do actually work mean that I am correct
> in
>
> believing that there is a FreeBSD OS embedded in my system?
>
>
> Thank You,
>
> Free BSD
>
>
> Lamb Agency
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "
> freebsd-questions-unsubscribe at freebsd.org"
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 11 Jul 2018 20:26:48 +0100
> From: Norman Gray <norman.gray at glasgow.ac.uk>
> To: David Johnson <djtherenovator at gmail.com>
> Cc: <freebsd-questions at freebsd.org>
> Subject: Re: Help with an Urgent Matter
> Message-ID: <C2A446AB-2D43-4B4F-983D-54AF107C7ED1 at glasgow.ac.uk>
> Content-Type: text/plain; format=flowed
>
>
> Greetings.
>
> On 11 Jul 2018, at 20:08, David Johnson wrote:
>
> > I have found a FreeBSD OS embedded in my Mac which is fully
> > implemented.
>
> Not really.  macOS uses a lot of the FreeBSD 'userland' -- ie, the user
> commands -- but the kernel is significantly different.
>
> There is quite a close relationship between macOS and FreeBSD, though
> I'm vague on the details (if anyone has any links, I'd be very
> interested in them).  However close it is, one cannot realistically say
> 'macOS is FreeBSD'!
>
> > I followed the instructions and did the following from your website
> > documentation:
> >
> > in terminal;  shutdown -k +1 "message"
>
> The -k option means:
>
>      -k      Kick everybody off.  The -k option does not actually halt
> the sys-
>               tem, but leaves the system multi-user with logins disabled
> (for all
>               but super-user).
>
> See 'man shutdown'
>
> As it happens, I think that 'shutdown -h now' does work on macOS, but it
> may not be formally supported.  That is, there may well be other aspects
> of a fully controlled shutdown which this will miss.
>
> Good wishes,
>
> Norman
>
>
> --
> Norman Gray  :  https://nxg.me.uk
> SUPA School of Physics and Astronomy, University of Glasgow, UK
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 11 Jul 2018 16:23:38 -0400
> From: "James B. Byrne" <byrnejb at harte-lyne.ca>
> To: freebsd-questions at freebsd.org
> Subject: Why can I not get amd64/11.1-RELEASE?
> Message-ID:
>         <688231194e76f0359de77528168a96c1.squirrel at webmail.harte-lyne.ca>
> Content-Type: text/plain;charset=iso-8859-1
>
> I am experiencing difficulty installing ezjail-admin.  Specifically
> when I run 'ezjail-admin install' I get this:
>
> fetch:
>
> ftp://ftp.freebsd.org/pub/FreeBSD/releases/amd64/amd64/11.1-RELEASE/base.txz
> :
> Permission denied
> fetch:
>
> ftp://ftp.freebsd.org/pub/FreeBSD/snapshot/amd64/amd64/11.1-RELEASE/base.txz
> :
> File unavailable (e.g., file not found, no access)
> fetch:
> ftp://ftp.freebsd.org/pub/FreeBSD/amd64/amd64/11.1-RELEASE/base.txz:
> File unavailable (e.g., file not found, no access)
> . . .
>
> Checking out the ftp site I discover this:
>
> fetch:
>
> ftp://ftp.freebsd.org/pub/FreeBSD/snapshot/amd64/amd64/11.1-RELEASE/base.txz
> :
> File unavailable (e.g., file not found, no access)
>
> So, what is going on and how do I fix this?  I can connect and see the
> files, I just cannot get them:
>
> ftp> dir pub/FreeBSD/releases/amd64/amd64/11.1-RELEASE
> 229 Entering Extended Passive Mode (|||62035|)
> 150 Here comes the directory listing.
> -rw-r--r--    1 ftp      ftp          1157 Jul 21  2017 MANIFEST
> -rw-r--r--    1 ftp      ftp      49166232 Jul 21  2017 base-dbg.txz
> -rw-r--r--    1 ftp      ftp      104780108 Jul 21  2017 base.txz
> -rw-r--r--    1 ftp      ftp       1428656 Jul 21  2017 doc.txz
> -rw-r--r--    1 ftp      ftp      66586424 Jul 21  2017 kernel-dbg.txz
> -rw-r--r--    1 ftp      ftp      36773692 Jul 21  2017 kernel.txz
> -rw-r--r--    1 ftp      ftp      12555216 Jul 21  2017 lib32-dbg.txz
> -rw-r--r--    1 ftp      ftp      18499068 Jul 21  2017 lib32.txz
> -rw-r--r--    1 ftp      ftp      36756836 Jul 21  2017 ports.txz
> -rw-r--r--    1 ftp      ftp      147661560 Jul 21  2017 src.txz
> -rw-r--r--    1 ftp      ftp       4312456 Jul 21  2017 tests.txz
> 226 Directory send OK.
>
>
> --
> ***          e-Mail is NOT a SECURE channel          ***
>         Do NOT transmit sensitive data via e-Mail
>  Do NOT open attachments nor follow links sent by e-Mail
>
> James B. Byrne                mailto:ByrneJB at Harte-Lyne.ca
> Harte & Lyne Limited          http://www.harte-lyne.ca
> 9 Brockley Drive              vox: +1 905 561 1241
> Hamilton, Ontario             fax: +1 905 561 0757
> Canada  L8E 3C3
>
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 11 Jul 2018 22:31:33 +0200
> From: Philipp Vlassakakis <freebsd-en at lists.vlassakakis.de>
> To: byrnejb at harte-lyne.ca
> Cc: freebsd-questions at freebsd.org
> Subject: Re: Why can I not get amd64/11.1-RELEASE?
> Message-ID:
>         <456DE8C6-2761-4671-AAFE-F15CCC77ADF7 at lists.vlassakakis.de>
> Content-Type: text/plain;       charset=utf-8
>
> Can you save any other files?
> Does a simple ?touch test? work?
>
> Regards,
> Philipp
>
> > Am 11.07.2018 um 22:23 schrieb James B. Byrne via freebsd-questions <
> freebsd-questions at freebsd.org>:
> >
> > I am experiencing difficulty installing ezjail-admin.  Specifically
> > when I run 'ezjail-admin install' I get this:
> >
> > fetch:
> >
> ftp://ftp.freebsd.org/pub/FreeBSD/releases/amd64/amd64/11.1-RELEASE/base.txz
> :
> > Permission denied
> > fetch:
> >
> ftp://ftp.freebsd.org/pub/FreeBSD/snapshot/amd64/amd64/11.1-RELEASE/base.txz
> :
> > File unavailable (e.g., file not found, no access)
> > fetch:
> > ftp://ftp.freebsd.org/pub/FreeBSD/amd64/amd64/11.1-RELEASE/base.txz:
> > File unavailable (e.g., file not found, no access)
> > . . .
> >
> > Checking out the ftp site I discover this:
> >
> > fetch:
> >
> ftp://ftp.freebsd.org/pub/FreeBSD/snapshot/amd64/amd64/11.1-RELEASE/base.txz
> :
> > File unavailable (e.g., file not found, no access)
> >
> > So, what is going on and how do I fix this?  I can connect and see the
> > files, I just cannot get them:
> >
> > ftp> dir pub/FreeBSD/releases/amd64/amd64/11.1-RELEASE
> > 229 Entering Extended Passive Mode (|||62035|)
> > 150 Here comes the directory listing.
> > -rw-r--r--    1 ftp      ftp          1157 Jul 21  2017 MANIFEST
> > -rw-r--r--    1 ftp      ftp      49166232 Jul 21  2017 base-dbg.txz
> > -rw-r--r--    1 ftp      ftp      104780108 Jul 21  2017 base.txz
> > -rw-r--r--    1 ftp      ftp       1428656 Jul 21  2017 doc.txz
> > -rw-r--r--    1 ftp      ftp      66586424 Jul 21  2017 kernel-dbg.txz
> > -rw-r--r--    1 ftp      ftp      36773692 Jul 21  2017 kernel.txz
> > -rw-r--r--    1 ftp      ftp      12555216 Jul 21  2017 lib32-dbg.txz
> > -rw-r--r--    1 ftp      ftp      18499068 Jul 21  2017 lib32.txz
> > -rw-r--r--    1 ftp      ftp      36756836 Jul 21  2017 ports.txz
> > -rw-r--r--    1 ftp      ftp      147661560 Jul 21  2017 src.txz
> > -rw-r--r--    1 ftp      ftp       4312456 Jul 21  2017 tests.txz
> > 226 Directory send OK.
> >
> >
> > --
> > ***          e-Mail is NOT a SECURE channel          ***
> >        Do NOT transmit sensitive data via e-Mail
> > Do NOT open attachments nor follow links sent by e-Mail
> >
> > James B. Byrne                mailto:ByrneJB at Harte-Lyne.ca
> > Harte & Lyne Limited          http://www.harte-lyne.ca
> > 9 Brockley Drive              vox: +1 905 561 1241
> > Hamilton, Ontario             fax: +1 905 561 0757
> > Canada  L8E 3C3
> >
> > _______________________________________________
> > freebsd-questions at freebsd.org mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to "
> freebsd-questions-unsubscribe at freebsd.org"
>
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 11 Jul 2018 17:04:26 -0400
> From: "James B. Byrne" <byrnejb at harte-lyne.ca>
> To: freebsd-questions at freebsd.org
> Subject: Re: Why can I not get amd64/11.1-RELEASE?
> Message-ID:
>         <45fabaafa88136c1e63a057f86cce88d.squirrel at webmail.harte-lyne.ca>
> Content-Type: text/plain;charset=iso-8859-1
>
>
> On Wed, July 11, 2018 16:31, Philipp Vlassakakis wrote:
> > Can you save any other files?
> > Does a simple ???touch test??? work?
> >
>
> [root at vhost03 ~]# dir x
> bash: dir: command not found
> [root at vhost03 ~]# ll x
> -rw-r--r--  1 root  wheel  0 Jul 11 16:56 x
>
>
> --
> ***          e-Mail is NOT a SECURE channel          ***
>         Do NOT transmit sensitive data via e-Mail
>  Do NOT open attachments nor follow links sent by e-Mail
>
> James B. Byrne                mailto:ByrneJB at Harte-Lyne.ca
> Harte & Lyne Limited          http://www.harte-lyne.ca
> 9 Brockley Drive              vox: +1 905 561 1241
> Hamilton, Ontario             fax: +1 905 561 0757
> Canada  L8E 3C3
>
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 11 Jul 2018 14:29:59 -0700
> From: Jim Long <list at museum.rain.com>
> To: freebsd-questions at freebsd.org
> Subject: Disk/ZFS activity crash on 11.2-STABLE
> Message-ID: <20180711212959.GA81029 at g5.umpquanet.com>
> Content-Type: text/plain; charset=us-ascii
>
> I have a server running a Supermicro X11DPH-T system board (dmesg below)
> which is unstable under heavy disk read load.  The following command is
> sufficient to trigger a crash:
>
> # zfs send -R pool at snapshot > /dev/null
>
> That command takes an unpredictable amount of time to trigger the crash,
> but I have never seen it complete successfully.
>
> Further, crash dumps of this are difficult to obtain (see below),
> despite the fact that dumps are enabled and tested via:
>
> # sysctl debug.kdb.panic=1
>
> As disclosure, this machine sometimes exhibits a second failure mode
> with a "kernel trap 12 with interrupts disabled."  This typically occurs
> on boot, just about the point where the kernel begins enumerating the
> CPUs.  But that is not (yet) my primary concern.
>
> I typically perform the 'zfs send' stress test over an ssh session,
> although the server is nearby on a test bench.  I have not yet been at
> the console when the panic or crash happens, so I am not certain that
> the kernel is "panicking gracefully," if you'll pardon the oxymoron, I
> have yet to find any crash dumps in /var/crash after a disk-induced
> panic.
>
> Is a serial console the next step in troubleshooting this?  I am fairly
> strong in bash scripting, but inexperienced in kernel crash debugging.
> I already have remote syslogging set on this server, so it's feasible
> to write certain terse tidbits to syslog ("still alive at xx:yy PDT")
> and/or dump some key statistics every minute to the server's local ZFS
> pool, and then see what the last stats dump file shows upon reboot.
>
> What are some key stats I should capture at periodic intervals while
> waiting for the 'zfs send' to induce the crash -- iostat?  zfs-stats is
> also installed, but I'm ignorant about what stats I should dump, and how
> to infer any post-mortem meaning from them.
>
> This problem first appeared when doing a backup of this machine.  The
> 'zfs send' was invoked by a remote host over an ssh session with jumbo
> frames enabled, achieving a throughput of around 115 MB/sec going out
> over GigE.  To eliminate the network driver as a possible point of
> failure, I discovered that sending the 'zfs send' output to /dev/null
> was sufficient to trigger the crash.  I may try rate-limiting the
> output pipe with:
>
> # zfs send -R pool at snapshot | pv -Wbrat -L 1M > /dev/null
>
> to see whether the -L value has any effect on the ability of this
> command to complete successfully.
>
> After I started drafting this write-up, I finally got a crash dump.  I
> ran the stress script:
>
> #!/usr/bin/env bash
>
> FILE="/var/crash/zfs-stress.start"
> SLEEP_TIME=10
>
> # if this script causes a crash, then we should expect to see a
> # crash dump newer than this file:
>
> touch $FILE
>
> logger "begin $0"
>
> zfs destroy -rv tank at stress-test 2> /dev/null
>
> zfs snap -r tank at stress-test
>
> logger "begin 'zfs send -R tank at stress-test"
>
> zfs send -R tank at stress-test > /dev/null &
>
> logger "zfs send running in background"
>
> while [ -f $FILE ] && sleep $SLEEP_TIME; do
>
>   logger "still alive @ $(date +%H:%M:%S)"
>
> done
>
> -- snip
>
> while also running 'systat -vm' in one virtual terminal and writing
> 'zpool iostat -v' to disk every couple seconds.  I did finally observe a
> panic and this time got a dump.
>
> One quirk I forgot to mention is that after this ZFS-induced crash, on the
> next boot, the /etc/rc somehow does not run dhclient on the primary
> interface, despite its presence in /etc/rc.conf:
>
> ifconfig_ixl0="DHCP"
>
> I have no idea whether that is at all related, but it does mean that
> even if the system reboots after a crash, it is inaccessible except by
> the physical console.  I have to log in as root and say 'dhclient ixl0'.
> On the NEXT boot, the DHCP client is invoked by /etc/rc as one would
> expect.  I have:
>
> rc_debug="YES"
>
> defined in /etc/rc.conf but I am not seeing any messages that explain why
> dhclient is not being executed.
>
> I would be very grateful to anyone who has time to examine these
> post-mortems
> and offer any suggestions on where to go next.
>
> Thank you for your time reading this lengthy trouble report.
>
> Jim
>
>
>
> As promised, dmesg:
>
>
> Copyright (c) 1992-2018 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.2-STABLE #0 r335674: Tue Jun 26 13:20:24 PDT 2018
>     root at jimsdesk.example.edu:/usr/obj/usr/src/sys/GENERIC amd64
> FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM
> 6.0.0)
> VT(efifb): resolution 1680x1050
> CPU: Intel(R) Xeon(R) Gold 5118 CPU @ 2.30GHz (2300.08-MHz K8-class CPU)
>   Origin="GenuineIntel"  Id=0x50654  Family=0x6  Model=0x55  Stepping=4
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>   AMD Features2=0x121<LAHF,ABM,Prefetch>
>   Structured Extended
> Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL>
>   Structured Extended Features2=0x8<PKU>
>   Structured Extended Features3=0xc000000<IBPB,STIBP>
>   XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
>   TSC: P-state invariant, performance statistics
> real memory  = 103079215104 (98304 MB)
> avail memory = 98749128704 (94174 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <SUPERM SMCI--MB>
> FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
> FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads
> ioapic6: Changing APIC ID to 16
> ioapic7: Changing APIC ID to 17
> ioapic8: Changing APIC ID to 18
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-31 on motherboard
> ioapic2 <Version 2.0> irqs 32-39 on motherboard
> ioapic3 <Version 2.0> irqs 40-47 on motherboard
> ioapic4 <Version 2.0> irqs 48-55 on motherboard
> ioapic5 <Version 2.0> irqs 72-79 on motherboard
> ioapic6 <Version 2.0> irqs 80-87 on motherboard
> ioapic7 <Version 2.0> irqs 88-95 on motherboard
> ioapic8 <Version 2.0> irqs 96-103 on motherboard
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #38 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #16 Launched!
> SMP: AP CPU #12 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #17 Launched!
> SMP: AP CPU #40 Launched!
> SMP: AP CPU #29 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #27 Launched!
> SMP: AP CPU #19 Launched!
> SMP: AP CPU #13 Launched!
> SMP: AP CPU #22 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #28 Launched!
> SMP: AP CPU #30 Launched!
> SMP: AP CPU #11 Launched!
> SMP: AP CPU #42 Launched!
> SMP: AP CPU #32 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #34 Launched!
> SMP: AP CPU #14 Launched!
> SMP: AP CPU #37 Launched!
> SMP: AP CPU #20 Launched!
> SMP: AP CPU #41 Launched!
> SMP: AP CPU #21 Launched!
> SMP: AP CPU #18 Launched!
> SMP: AP CPU #35 Launched!
> SMP: AP CPU #23 Launched!
> SMP: AP CPU #10 Launched!
> SMP: AP CPU #36 Launched!
> SMP: AP CPU #31 Launched!
> SMP: AP CPU #43 Launched!
> SMP: AP CPU #44 Launched!
> SMP: AP CPU #45 Launched!
> SMP: AP CPU #39 Launched!
> SMP: AP CPU #8 Launched!
> SMP: AP CPU #24 Launched!
> SMP: AP CPU #25 Launched!
> SMP: AP CPU #46 Launched!
> SMP: AP CPU #9 Launched!
> SMP: AP CPU #26 Launched!
> SMP: AP CPU #33 Launched!
> SMP: AP CPU #15 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #47 Launched!
> Timecounter "TSC-low" frequency 1150040467 Hz quality 1000
> random: entropy device external interface
> kbd1 at kbdmux0
> netmap: loaded module
> module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4590, 0) error 19
> random: registering fast source Intel Secure Key RNG
> random: fast provider: "Intel Secure Key RNG"
> nexus0
> cryptosoft0: <software crypto> on motherboard
> acpi0: <SUPERM SUPERM> on motherboard
> acpi0: Power Button (fixed)
> cpu0: <ACPI CPU> numa-domain 0 on acpi0
> cpu1: <ACPI CPU> numa-domain 0 on acpi0
> cpu2: <ACPI CPU> numa-domain 0 on acpi0
> cpu3: <ACPI CPU> numa-domain 0 on acpi0
> cpu4: <ACPI CPU> numa-domain 0 on acpi0
> cpu5: <ACPI CPU> numa-domain 0 on acpi0
> cpu6: <ACPI CPU> numa-domain 0 on acpi0
> cpu7: <ACPI CPU> numa-domain 0 on acpi0
> cpu8: <ACPI CPU> numa-domain 0 on acpi0
> cpu9: <ACPI CPU> numa-domain 0 on acpi0
> cpu10: <ACPI CPU> numa-domain 0 on acpi0
> cpu11: <ACPI CPU> numa-domain 0 on acpi0
> cpu12: <ACPI CPU> numa-domain 0 on acpi0
> cpu13: <ACPI CPU> numa-domain 0 on acpi0
> cpu14: <ACPI CPU> numa-domain 0 on acpi0
> cpu15: <ACPI CPU> numa-domain 0 on acpi0
> cpu16: <ACPI CPU> numa-domain 0 on acpi0
> cpu17: <ACPI CPU> numa-domain 0 on acpi0
> cpu18: <ACPI CPU> numa-domain 0 on acpi0
> cpu19: <ACPI CPU> numa-domain 0 on acpi0
> cpu20: <ACPI CPU> numa-domain 0 on acpi0
> cpu21: <ACPI CPU> numa-domain 0 on acpi0
> cpu22: <ACPI CPU> numa-domain 0 on acpi0
> cpu23: <ACPI CPU> numa-domain 0 on acpi0
> cpu24: <ACPI CPU> numa-domain 1 on acpi0
> cpu25: <ACPI CPU> numa-domain 1 on acpi0
> cpu26: <ACPI CPU> numa-domain 1 on acpi0
> cpu27: <ACPI CPU> numa-domain 1 on acpi0
> cpu28: <ACPI CPU> numa-domain 1 on acpi0
> cpu29: <ACPI CPU> numa-domain 1 on acpi0
> cpu30: <ACPI CPU> numa-domain 1 on acpi0
> cpu31: <ACPI CPU> numa-domain 1 on acpi0
> cpu32: <ACPI CPU> numa-domain 1 on acpi0
> cpu33: <ACPI CPU> numa-domain 1 on acpi0
> cpu34: <ACPI CPU> numa-domain 1 on acpi0
> cpu35: <ACPI CPU> numa-domain 1 on acpi0
> cpu36: <ACPI CPU> numa-domain 1 on acpi0
> cpu37: <ACPI CPU> numa-domain 1 on acpi0
> cpu38: <ACPI CPU> numa-domain 1 on acpi0
> cpu39: <ACPI CPU> numa-domain 1 on acpi0
> cpu40: <ACPI CPU> numa-domain 1 on acpi0
> cpu41: <ACPI CPU> numa-domain 1 on acpi0
> cpu42: <ACPI CPU> numa-domain 1 on acpi0
> cpu43: <ACPI CPU> numa-domain 1 on acpi0
> cpu44: <ACPI CPU> numa-domain 1 on acpi0
> cpu45: <ACPI CPU> numa-domain 1 on acpi0
> cpu46: <ACPI CPU> numa-domain 1 on acpi0
> cpu47: <ACPI CPU> numa-domain 1 on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
> atrtc0: registered as a time-of-day clock, resolution 1.000000s
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 24000000 Hz quality 950
> Event timer "HPET" frequency 24000000 Hz quality 350
> Event timer "HPET1" frequency 24000000 Hz quality 340
> Event timer "HPET2" frequency 24000000 Hz quality 340
> Event timer "HPET3" frequency 24000000 Hz quality 340
> Event timer "HPET4" frequency 24000000 Hz quality 340
> Event timer "HPET5" frequency 24000000 Hz quality 340
> Event timer "HPET6" frequency 24000000 Hz quality 340
> Event timer "HPET7" frequency 24000000 Hz quality 340
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
> acpi_syscontainer0: <System Container> on acpi0
> acpi_syscontainer1: <System Container> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
> pcib0: _OSC returned error 0x10
> pci0: <ACPI PCI bus> numa-domain 0 on pcib0
> pci0: <dasp, performance counters> at device 8.1 (no driver attached)
> pci0: <unknown> at device 17.0 (no driver attached)
> pci0: <unknown> at device 17.1 (no driver attached)
> ahci0: <Intel Lewisburg AHCI SATA controller> port
> 0x3070-0x3077,0x3060-0x3063,0x3020-0x303f mem
> 0x9d206000-0x9d207fff,0x9d209000-0x9d2090ff,0x9d180000-0x9d1fffff irq 16 at
> device 17.5 numa-domain 0 on pci0
> ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich3: <AHCI channel> at channel 3 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> ahciem0: <AHCI enclosure management bridge> on ahci0
> xhci0: <Intel Lewisburg USB 3.0 controller> mem
> 0x383ffff00000-0x383ffff0ffff irq 16 at device 20.0 numa-domain 0 on pci0
> xhci0: 32 bytes context size, 64-bit DMA
> usbus0: waiting for BIOS to give up control
> xhci_interrupt: host controller halted
> usbus0 numa-domain 0 on xhci0
> usbus0: 5.0Gbps Super Speed USB v3.0
> pci0: <simple comms> at device 22.0 (no driver attached)
> pci0: <simple comms> at device 22.1 (no driver attached)
> pci0: <simple comms> at device 22.4 (no driver attached)
> ahci1: <Intel Lewisburg AHCI SATA controller> port
> 0x3050-0x3057,0x3040-0x3043,0x3000-0x301f mem
> 0x9d204000-0x9d205fff,0x9d208000-0x9d2080ff,0x9d100000-0x9d17ffff irq 16 at
> device 23.0 numa-domain 0 on pci0
> ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
> ahcich6: <AHCI channel> at channel 0 on ahci1
> ahcich7: <AHCI channel> at channel 1 on ahci1
> ahcich8: <AHCI channel> at channel 2 on ahci1
> ahcich9: <AHCI channel> at channel 3 on ahci1
> ahcich10: <AHCI channel> at channel 4 on ahci1
> ahcich11: <AHCI channel> at channel 5 on ahci1
> ahcich12: <AHCI channel> at channel 6 on ahci1
> ahcich13: <AHCI channel> at channel 7 on ahci1
> ahciem1: <AHCI enclosure management bridge> on ahci1
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0
> pci1: <ACPI PCI bus> numa-domain 0 on pcib1
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 numa-domain 0 on pci0
> pci2: <ACPI PCI bus> numa-domain 0 on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 0.0 numa-domain 0 on pci2
> pci3: <ACPI PCI bus> numa-domain 0 on pcib3
> vgapci0: <VGA-compatible display> port 0x2000-0x207f mem
> 0x9c000000-0x9cffffff,0x9d000000-0x9d01ffff irq 17 at device 0.0
> numa-domain 0 on pci3
> vgapci0: Boot video device
> isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
> isa0: <ISA bus> numa-domain 0 on isab0
> pci0: <memory> at device 31.2 (no driver attached)
> pci0: <serial bus> at device 31.5 (no driver attached)
> pcib4: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
> pcib4: _OSC returned error 0x10
> pci4: <ACPI PCI bus> numa-domain 0 on pcib4
> pcib5: <ACPI PCI-PCI bridge> irq 39 at device 0.0 numa-domain 0 on pci4
> pci5: <ACPI PCI bus> numa-domain 0 on pcib5
> pcib6: <ACPI PCI-PCI bridge> mem 0xaae00000-0xaae1ffff irq 32 at device
> 0.0 numa-domain 0 on pci5
> pci6: <ACPI PCI bus> numa-domain 0 on pcib6
> pcib7: <PCI-PCI bridge> irq 38 at device 3.0 numa-domain 0 on pci6
> pci7: <PCI bus> numa-domain 0 on pcib7
> ixl0: <Intel(R) Ethernet Connection 700 Series PF Driver, Version -
> 1.9.9-k> mem 0xa9000000-0xa9ffffff,0xaa008000-0xaa00ffff irq 38 at device
> 0.0 numa-domain 0 on pci7
> ixl0: using 1024 tx descriptors and 1024 rx descriptors
> ixl0: fw 3.1.52349 api 1.5 nvm 3.25 etid 800009e7 oem 1.262.0
> ixl0: PF-ID[0]: VFs 32, MSIX 129, VF MSIX 5, QPs 768, MDIO shared
> ixl0: Using MSIX interrupts with 9 vectors
> ixl0: Allocating 8 queues for PF LAN VSI; 8 queues active
> ixl0: Ethernet address: ac:1f:6b:61:54:06
> ixl0: SR-IOV ready
> queues is 0xfffffe0001d13000
> ixl0: netmap queues/slots: TX 8/1024, RX 8/1024
> ixl1: <Intel(R) Ethernet Connection 700 Series PF Driver, Version -
> 1.9.9-k> mem 0xa8000000-0xa8ffffff,0xaa000000-0xaa007fff irq 38 at device
> 0.1 numa-domain 0 on pci7
> ixl1: using 1024 tx descriptors and 1024 rx descriptors
> ixl1: fw 3.1.52349 api 1.5 nvm 3.25 etid 800009e7 oem 1.262.0
> ixl1: PF-ID[1]: VFs 32, MSIX 129, VF MSIX 5, QPs 768, MDIO shared
> ixl1: Using MSIX interrupts with 9 vectors
> ixl1: Allocating 8 queues for PF LAN VSI; 8 queues active
> ixl1: Ethernet address: ac:1f:6b:61:54:07
> ixl1: SR-IOV ready
> queues is 0xfffffe0001e69000
> ixl1: netmap queues/slots: TX 8/1024, RX 8/1024
> pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
> pcib8: _OSC returned error 0x10
> pci8: <ACPI PCI bus> numa-domain 0 on pcib8
> pcib9: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci8
> pci9: <ACPI PCI bus> numa-domain 0 on pcib9
> mpr0: <Avago Technologies (LSI) SAS3008> port 0x7000-0x70ff mem
> 0xb8640000-0xb864ffff,0xb8600000-0xb863ffff irq 42 at device 0.0
> numa-domain 0 on pci9
> mpr0: Firmware: 15.00.03.00, Driver: 18.03.00.00-fbsd
> mpr0: IOCCapabilities:
> 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
> pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
> pcib10: _OSC returned error 0x10
> pci10: <ACPI PCI bus> numa-domain 0 on pcib10
> pci10: <dasp, performance counters> at device 14.0 (no driver attached)
> pci10: <dasp, performance counters> at device 15.0 (no driver attached)
> pci10: <dasp, performance counters> at device 18.0 (no driver attached)
> pci10: <dasp, performance counters> at device 18.1 (no driver attached)
> pcib11: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
> ixl0: Link is up, 1 Gbps Full Duplex, Requested FEC: None, Negotiated FEC:
> None, Autoneg: True, Flow Control: None
> ixl0: link state changed to UP
> ixl1: Link is up, 1 Gbps Full Duplex, Requested FEC: None, Negotiated FEC:
> None, Autoneg: True, Flow Control: Full
> ixl1: link state changed to UP
> pcib11: _OSC returned error 0x10
> pci11: <ACPI PCI bus> numa-domain 1 on pcib11
> pci11: <dasp, performance counters> at device 8.1 (no driver attached)
> pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
> pcib12: _OSC returned error 0x10
> pci12: <ACPI PCI bus> numa-domain 1 on pcib12
> pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
> pcib13: _OSC returned error 0x10
> pci13: <ACPI PCI bus> numa-domain 1 on pcib13
> pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
> pcib14: _OSC returned error 0x10
> pci14: <ACPI PCI bus> numa-domain 1 on pcib14
> pci14: <dasp, performance counters> at device 14.0 (no driver attached)
> pci14: <dasp, performance counters> at device 15.0 (no driver attached)
> pci14: <dasp, performance counters> at device 18.0 (no driver attached)
> pci14: <dasp, performance counters> at device 18.1 (no driver attached)
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
> ppc0: cannot reserve I/O port range
> est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
> est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1
> est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2
> est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3
> est4: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu4
> est5: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu5
> est6: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu6
> est7: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu7
> est8: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu8
> est9: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu9
> est10: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu10
> est11: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu11
> est12: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu12
> est13: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu13
> est14: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu14
> est15: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu15
> est16: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu16
> est17: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu17
> est18: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu18
> est19: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu19
> est20: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu20
> est21: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu21
> est22: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu22
> est23: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu23
> est24: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu24
> est25: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu25
> est26: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu26
> est27: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu27
> est28: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu28
> est29: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu29
> est30: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu30
> est31: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu31
> est32: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu32
> est33: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu33
> est34: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu34
> est35: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu35
> est36: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu36
> est37: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu37
> est38: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu38
> est39: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu39
> est40: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu40
> est41: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu41
> est42: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu42
> est43: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu43
> est44: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu44
> est45: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu45
> est46: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu46
> est47: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu47
> random: unblocking device.
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> ugen0.1: <0x8086 XHCI root HUB> at usbus0
> mpr0: uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
> usbus0
> SAS Address from SAS device page0 = 5000c500955fb571
> mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000a>
> enclosureHandle<0x0002> slot 0
> mpr0: At enclosure level 0 and connector name (    )
> mpr0: SAS Address from SAS device page0 = 5000c5009550e4f1
> mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000b>
> enclosureHandle<0x0002> slot 1
> mpr0: At enclosure level 0 and connector name (    )
> mpr0: SAS Address from SAS device page0 = 5000c50095518c95
> mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000c>
> enclosureHandle<0x0002> slot 2
> mpr0: At enclosure level 0 and connector name (    )
> mpr0: SAS Address from SAS device page0 = 5000c500955fb3c5
> mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000d>
> enclosureHandle<0x0002> slot 3
> mpr0: At enclosure level 0 and connector name (    )
> mpr0: SAS Address from SAS device page0 = 5000c500955fb021
> mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000e>
> enclosureHandle<0x0002> slot 4
> mpr0: At enclosure level 0 and connector name (    )
> mpr0: SAS Address from SAS device page0 = 5000c5009550e891
> mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000f>
> enclosureHandle<0x0002> slot 5
> mpr0: At enclosure level 0 and connector name (    )
> mpr0: SAS Address from SAS device page0 = 500304801eb5dbfd
> mpr0: Found device <4411<SmpInit,SspTarg,SepDev>,End Device> <12.0Gbps>
> handle<0x0010> enclosureHandle<0x0002> slot 12
> mpr0: At enclosure level 0 and connector name (    )
> ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
> ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
> ses0: SEMB SES Device
> ses1 at ahciem1 bus 0 scbus15 target 0 lun 0
> ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
> ses1: SEMB SES Device
> ses2 at mpr0 bus 0 scbus16 target 20 lun 0
> ses2: <LSI SAS3x28 0601> Fixed Enclosure Services SPC-3 SCSI device
> ses2: 1200.000MB/s transfers
> ses2: Command Queueing enabled
> ses2: SCSI-3 ENC Device
> ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
> ada0: <INTEL SSDSC2KB240G7 SCV10121> ACS-3 ATA SATA 3.x device
> ada0: Serial Number BTYS81150CWH240AGN
> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
> ada0: Command Queueing enabled
> ada0: 228936MB (468862128 512 byte sectors)
> ada1 at ahcich5 bus 0 scbus5 target 0 lun 0
> ada1: <INTEL SSDSC2KB240G7 SCV10121> ACS-3 ATA SATA 3.x device
> ada1: Serial Number BTYS814205JS240AGN
> ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
> ada1: Command Queueing enabled
> ada1: 228936MB (468862128 512 byte sectors)
> uhub0: 26 ports with 26 removable, self powered
> ses2: pass4,da0: Element descriptor: 'Slot00'
> da1 at mpr0 bus 0 scbus16 target 9 lun 0
> da2 at mpr0 bus 0 scbus16 target 10 lun 0
> da0 at mpr0 bus 0 scbus16 target 8 lun 0
> da5 at mpr0 bus 0 scbus16 target 13 lun 0
> da4 at mpr0 bus 0 scbus16 target 12 lun 0
> da2: <SEAGATE ST4000NM0095 K004> Fixed Direct Access SPC-4 SCSI device
> da2: Serial Number ZC15T3GB0000C832EM0C
> da2: 1200.000MB/s transfers
> da2: Command Queueing enabled
> da2: 3815447MB (976754646 4096 byte sectors)
> da0: <SEAGATE ST4000NM0095 K004> Fixed Direct Access SPC-4 SCSI device
> da0: Serial Number ZC1606NJ0000R833G9JK
> da0: 1200.000MB/s transfers
> da0: Command Queueing enabled
> da0: 3815447MB (976754646 4096 byte sectors)
> da4: <SEAGATE ST4000NM0095 K004> Fixed Direct Access SPC-4 SCSI device
> da4: Serial Number ZC1606RR0000R833G8YR
> da4: 1200.000MB/s transfers
> da4: Command Queueing enabled
> da4: 3815447MB (976754646 4096 byte sectors)
> ses2: pass4,da0: SAS Device Slot Element: 1 Phys at Slot 0
> ses2:  phy 0: SAS device type 1 id 0
> da5: da1: <SEAGATE ST4000NM0095 K004> Fixed Direct Access SPC-4 SCSI device
> da1: Serial Number ZC15V7DV0000C8258M38
> ugen0.2: <Dell Dell USB Entry Keyboard> at usbus0
> da1: 1200.000MB/s transfers
> da1: Command Queueing enabled
> da1: 3815447MB (976754646 4096 byte sectors)
> <SEAGATE ST4000NM0095 K004> Fixed Direct Access SPC-4 SCSI device
> ukbd0da5: Serial Number ZC15KB320000R832RAR7
> da5: 1200.000MB/s transfers
> da5: Command Queueing enabled
> da5: 3815447MB (976754646 4096 byte sectors)
>  numa-domain 0 on uhub0
> da3 at mpr0 bus 0 scbus16 target 11 lun 0
> ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.15, addr 1> on
> usbus0
> kbd2 at ukbd0
> ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
> ses2:  phy 0: parent 500304801eb5dbff addr 5000c500955fb571
> da3: <SEAGATE ST4000NM0095 K004> Fixed Direct Access SPC-4 SCSI device
> da3: Serial Number ZC1606Q80000R833WKE8
> da3: 1200.000MB/s transfers
> da3: Command Queueing enabled
> da3: 3815447MB (976754646 4096 byte sectors)
> ses2: pass5,da1: Element descriptor: 'Slot01'
> ses2: pass5,da1: SAS Device Slot Element: 1 Phys at Slot 1
> ses2:  phy 0: SAS device type 1 id 0
> ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
> ses2:  phy 0: parent 500304801eb5dbff addr 5000c5009550e4f1
> ses2: pass6,da2: Element descriptor: 'Slot02'
> ses2: pass6,da2: SAS Device Slot Element: 1 Phys at Slot 2
> ses2:  phy 0: SAS device type 1 id 0
> ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
> ses2:  phy 0: parent 500304801eb5dbff addr 5000c50095518c95
> ses2: pass7,da3: Element descriptor: 'Slot03'
> ses2: pass7,da3: SAS Device Slot Element: 1 Phys at Slot 3
> ses2:  phy 0: SAS device type 1 id 0
> ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
> ses2:  phy 0: parent 500304801eb5dbff addr 5000c500955fb3c5
> ses2: pass8,da4: Element descriptor: 'Slot04'
> ses2: pass8,da4: SAS Device Slot Element: 1 Phys at Slot 4
> ugen0.3: <vendor 0x0557 product 0x7000> at usbus0
> ses2:  phy 0: SAS device type 1 id 0
> ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
> ses2:  phy 0: parent 500304801eb5dbff addr 5000c500955fb021
> ses2: pass9,da5: Element descriptor: 'Slot05'
> ses2: pass9,da5: SAS Device Slot Element: 1 Phys at Slot 5
> ses2:  phy 0: SAS device type 1 id 0
> ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
> ses2:  phy 0: parent 500304801eb5dbff addr 5000c5009550e891
> uhub1 numa-domain 0 on uhub0
> uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 2> on
> usbus0
> Trying to mount root from zfs:tank/default/root []...
> Root mount waiting for: usbus0
> uhub1: 4 ports with 3 removable, self powered
> ugen0.4: <vendor 0x0557 product 0x2419> at usbus0
> ukbd1 numa-domain 0 on uhub1
> ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on
> usbus0
> kbd3 at ukbd1
> lo0: link state changed to UP
> ums0 numa-domain 0 on uhub1
> ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on
> usbus0
> ums0: 3 buttons and [Z] coordinates ID=0
>
>
>
> And pciconf -lvb:
>
>
> hostb0 at pci0:0:0:0:      class=0x060000 card=0x098115d9 chip=0x20208086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E DMI3 Registers'
>     class      = bridge
>     subclass   = HOST-PCI
> none0 at pci0:0:4:0:       class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x383ffff2c000, size 16384,
> enabled
> none1 at pci0:0:4:1:       class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x383ffff28000, size 16384,
> enabled
> none2 at pci0:0:4:2:       class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x383ffff24000, size 16384,
> enabled
> none3 at pci0:0:4:3:       class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x383ffff20000, size 16384,
> enabled
> none4 at pci0:0:4:4:       class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x383ffff1c000, size 16384,
> enabled
> none5 at pci0:0:4:5:       class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x383ffff18000, size 16384,
> enabled
> none6 at pci0:0:4:6:       class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x383ffff14000, size 16384,
> enabled
> none7 at pci0:0:4:7:       class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x383ffff10000, size 16384,
> enabled
> none8 at pci0:0:5:0:       class=0x088000 card=0x00008086 chip=0x20248086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E MM/Vt-d Configuration Registers'
>     class      = base peripheral
> none9 at pci0:0:5:2:       class=0x088000 card=0x00000000 chip=0x20258086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> ioapic0 at pci0:0:5:4:     class=0x080020 card=0x20268086 chip=0x20268086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
>     subclass   = interrupt controller
>     bar   [10] = type Memory, range 32, base 0x9d20a000, size 4096, enabled
> none10 at pci0:0:8:0:      class=0x088000 card=0x00008086 chip=0x20148086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E Ubox Registers'
>     class      = base peripheral
> none11 at pci0:0:8:1:      class=0x110100 card=0x00008086 chip=0x20158086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E Ubox Registers'
>     class      = dasp
>     subclass   = performance counters
> none12 at pci0:0:8:2:      class=0x088000 card=0x00008086 chip=0x20168086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E Ubox Registers'
>     class      = base peripheral
> none13 at pci0:0:17:0:     class=0xff0000 card=0x098115d9 chip=0xa1ec8086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
> none14 at pci0:0:17:1:     class=0xff0000 card=0x098115d9 chip=0xa1ed8086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
> ahci0 at pci0:0:17:5:      class=0x010601 card=0x098115d9 chip=0xa1d28086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg SSATA Controller [AHCI mode]'
>     class      = mass storage
>     subclass   = SATA
>     bar   [10] = type Memory, range 32, base 0x9d206000, size 8192, enabled
>     bar   [14] = type Memory, range 32, base 0x9d209000, size 256, enabled
>     bar   [18] = type I/O Port, range 32, base 0x3070, size 8, enabled
>     bar   [1c] = type I/O Port, range 32, base 0x3060, size 4, enabled
>     bar   [20] = type I/O Port, range 32, base 0x3020, size 32, enabled
>     bar   [24] = type Memory, range 32, base 0x9d180000, size 524288,
> enabled
> xhci0 at pci0:0:20:0:      class=0x0c0330 card=0x098115d9 chip=0xa1af8086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg USB 3.0 xHCI Controller'
>     class      = serial bus
>     subclass   = USB
>     bar   [10] = type Memory, range 64, base 0x383ffff00000, size 65536,
> enabled
> none15 at pci0:0:20:2:     class=0x118000 card=0x098115d9 chip=0xa1b18086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg Thermal Subsystem'
>     class      = dasp
>     bar   [10] = type Memory, range 64, base 0x383ffff33000, size 4096,
> enabled
> none16 at pci0:0:22:0:     class=0x078000 card=0x098115d9 chip=0xa1ba8086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg CSME: HECI'
>     class      = simple comms
>     bar   [10] = type Memory, range 64, base 0x383ffff32000, size 4096,
> enabled
> none17 at pci0:0:22:1:     class=0x078000 card=0x098115d9 chip=0xa1bb8086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg CSME: HECI'
>     class      = simple comms
>     bar   [10] = type Memory, range 64, base 0x383ffff31000, size 4096,
> enabled
> none18 at pci0:0:22:4:     class=0x078000 card=0x098115d9 chip=0xa1be8086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg CSME: HECI'
>     class      = simple comms
>     bar   [10] = type Memory, range 64, base 0x383ffff30000, size 4096,
> enabled
> ahci1 at pci0:0:23:0:      class=0x010601 card=0x098115d9 chip=0xa1828086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg SATA Controller [AHCI mode]'
>     class      = mass storage
>     subclass   = SATA
>     bar   [10] = type Memory, range 32, base 0x9d204000, size 8192, enabled
>     bar   [14] = type Memory, range 32, base 0x9d208000, size 256, enabled
>     bar   [18] = type I/O Port, range 32, base 0x3050, size 8, enabled
>     bar   [1c] = type I/O Port, range 32, base 0x3040, size 4, enabled
>     bar   [20] = type I/O Port, range 32, base 0x3000, size 32, enabled
>     bar   [24] = type Memory, range 32, base 0x9d100000, size 524288,
> enabled
> pcib1 at pci0:0:28:0:      class=0x060400 card=0x098115d9 chip=0xa1908086
> rev=0xf9 hdr=0x01
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg PCI Express Root Port'
>     class      = bridge
>     subclass   = PCI-PCI
> pcib2 at pci0:0:28:5:      class=0x060400 card=0x098115d9 chip=0xa1958086
> rev=0xf9 hdr=0x01
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg PCI Express Root Port'
>     class      = bridge
>     subclass   = PCI-PCI
> isab0 at pci0:0:31:0:      class=0x060100 card=0x098115d9 chip=0xa1c38086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg LPC Controller'
>     class      = bridge
>     subclass   = PCI-ISA
> none19 at pci0:0:31:2:     class=0x058000 card=0x098115d9 chip=0xa1a18086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg PMC'
>     class      = memory
>     bar   [10] = type Memory, range 32, base 0x9d200000, size 16384,
> enabled
> none20 at pci0:0:31:4:     class=0x0c0500 card=0x098115d9 chip=0xa1a38086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg SMBus'
>     class      = serial bus
>     subclass   = SMBus
>     bar   [10] = type Memory, range 64, base 0, size 256, disabled
>     bar   [20] = type I/O Port, range 32, base 0x780, size 32, enabled
> none21 at pci0:0:31:5:     class=0x0c8000 card=0x098115d9 chip=0xa1a48086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Lewisburg SPI Controller'
>     class      = serial bus
>     bar   [10] = type Memory, range 32, base 0xfe010000, size 4096, enabled
> pcib3 at pci0:2:0:0:       class=0x060400 card=0x11501a03 chip=0x11501a03
> rev=0x04 hdr=0x01
>     vendor     = 'ASPEED Technology, Inc.'
>     device     = 'AST1150 PCI-to-PCI Bridge'
>     class      = bridge
>     subclass   = PCI-PCI
> vgapci0 at pci0:3:0:0:     class=0x030000 card=0x098115d9 chip=0x20001a03
> rev=0x41 hdr=0x00
>     vendor     = 'ASPEED Technology, Inc.'
>     device     = 'ASPEED Graphics Family'
>     class      = display
>     subclass   = VGA
>     bar   [10] = type Memory, range 32, base 0x9c000000, size 16777216,
> enabled
>     bar   [14] = type Memory, range 32, base 0x9d000000, size 131072,
> enabled
>     bar   [18] = type I/O Port, range 32, base 0x2000, size 128, enabled
> pcib5 at pci0:23:0:0:      class=0x060400 card=0x098115d9 chip=0x20308086
> rev=0x04 hdr=0x01
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCI Express Root Port A'
>     class      = bridge
>     subclass   = PCI-PCI
> none22 at pci0:23:5:0:     class=0x088000 card=0x00008086 chip=0x20348086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none23 at pci0:23:5:2:     class=0x088000 card=0x00000000 chip=0x20358086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E RAS Configuration Registers'
>     class      = base peripheral
> ioapic1 at pci0:23:5:4:    class=0x080020 card=0x20368086 chip=0x20368086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
>     subclass   = interrupt controller
>     bar   [10] = type Memory, range 32, base 0xaaf00000, size 4096, enabled
> none24 at pci0:23:8:0:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none25 at pci0:23:8:1:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none26 at pci0:23:8:2:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none27 at pci0:23:8:3:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none28 at pci0:23:8:4:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none29 at pci0:23:8:5:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none30 at pci0:23:8:6:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none31 at pci0:23:8:7:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none32 at pci0:23:9:0:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none33 at pci0:23:9:1:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none34 at pci0:23:9:2:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none35 at pci0:23:9:3:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none36 at pci0:23:9:4:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none37 at pci0:23:9:5:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none38 at pci0:23:9:6:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none39 at pci0:23:9:7:     class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none40 at pci0:23:10:0:    class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none41 at pci0:23:10:1:    class=0x088000 card=0x00008086 chip=0x208d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none42 at pci0:23:14:0:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none43 at pci0:23:14:1:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none44 at pci0:23:14:2:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none45 at pci0:23:14:3:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none46 at pci0:23:14:4:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none47 at pci0:23:14:5:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none48 at pci0:23:14:6:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none49 at pci0:23:14:7:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none50 at pci0:23:15:0:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none51 at pci0:23:15:1:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none52 at pci0:23:15:2:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none53 at pci0:23:15:3:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none54 at pci0:23:15:4:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none55 at pci0:23:15:5:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none56 at pci0:23:15:6:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none57 at pci0:23:15:7:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none58 at pci0:23:16:0:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none59 at pci0:23:16:1:    class=0x088000 card=0x00008086 chip=0x208e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none60 at pci0:23:29:0:    class=0x088000 card=0x00008086 chip=0x20548086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none61 at pci0:23:29:1:    class=0x088000 card=0x00008086 chip=0x20558086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none62 at pci0:23:29:2:    class=0x088000 card=0x00008086 chip=0x20568086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none63 at pci0:23:29:3:    class=0x088000 card=0x00008086 chip=0x20578086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CHA Registers'
>     class      = base peripheral
> none64 at pci0:23:30:0:    class=0x088000 card=0x00008086 chip=0x20808086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCU Registers'
>     class      = base peripheral
> none65 at pci0:23:30:1:    class=0x088000 card=0x00008086 chip=0x20818086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCU Registers'
>     class      = base peripheral
> none66 at pci0:23:30:2:    class=0x088000 card=0x00008086 chip=0x20828086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCU Registers'
>     class      = base peripheral
> none67 at pci0:23:30:3:    class=0x088000 card=0x00008086 chip=0x20838086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCU Registers'
>     class      = base peripheral
> none68 at pci0:23:30:4:    class=0x088000 card=0x00008086 chip=0x20848086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCU Registers'
>     class      = base peripheral
> none69 at pci0:23:30:5:    class=0x088000 card=0x00008086 chip=0x20858086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCU Registers'
>     class      = base peripheral
> none70 at pci0:23:30:6:    class=0x088000 card=0x00008086 chip=0x20868086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCU Registers'
>     class      = base peripheral
> pcib6 at pci0:24:0:0:      class=0x060400 card=0xdeadbeef chip=0x37c08086
> rev=0x09 hdr=0x01
>     vendor     = 'Intel Corporation'
>     class      = bridge
>     subclass   = PCI-PCI
>     bar   [10] = type Memory, range 64, base 0xaae00000, size 131072,
> enabled
> pcib7 at pci0:25:3:0:      class=0x060400 card=0xdeadbeef chip=0x37c58086
> rev=0x09 hdr=0x01
>     vendor     = 'Intel Corporation'
>     class      = bridge
>     subclass   = PCI-PCI
> ixl0 at pci0:26:0:0:       class=0x020000 card=0x37d215d9 chip=0x37d28086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Ethernet Connection X722 for 10GBASE-T'
>     class      = network
>     subclass   = ethernet
>     bar   [10] = type Prefetchable Memory, range 64, base 0xa9000000, size
> 16777216, enabled
>     bar   [1c] = type Prefetchable Memory, range 64, base 0xaa008000, size
> 32768, enabled
> ixl1 at pci0:26:0:1:       class=0x020000 card=0x37d215d9 chip=0x37d28086
> rev=0x09 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Ethernet Connection X722 for 10GBASE-T'
>     class      = network
>     subclass   = ethernet
>     bar   [10] = type Prefetchable Memory, range 64, base 0xa8000000, size
> 16777216, enabled
>     bar   [1c] = type Prefetchable Memory, range 64, base 0xaa000000, size
> 32768, enabled
> pcib9 at pci0:58:2:0:      class=0x060400 card=0x098115d9 chip=0x20328086
> rev=0x04 hdr=0x01
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E PCI Express Root Port C'
>     class      = bridge
>     subclass   = PCI-PCI
> none71 at pci0:58:5:0:     class=0x088000 card=0x00008086 chip=0x20348086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none72 at pci0:58:5:2:     class=0x088000 card=0x00000000 chip=0x20358086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E RAS Configuration Registers'
>     class      = base peripheral
> ioapic2 at pci0:58:5:4:    class=0x080020 card=0x20368086 chip=0x20368086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
>     subclass   = interrupt controller
>     bar   [10] = type Memory, range 32, base 0xb8700000, size 4096, enabled
> none73 at pci0:58:8:0:     class=0x088000 card=0x00008086 chip=0x20668086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none74 at pci0:58:9:0:     class=0x088000 card=0x00008086 chip=0x20668086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none75 at pci0:58:10:0:    class=0x088000 card=0x00008086 chip=0x20408086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none76 at pci0:58:10:1:    class=0x088000 card=0x00008086 chip=0x20418086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none77 at pci0:58:10:2:    class=0x088000 card=0x00008086 chip=0x20428086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none78 at pci0:58:10:3:    class=0x088000 card=0x00008086 chip=0x20438086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none79 at pci0:58:10:4:    class=0x088000 card=0x00008086 chip=0x20448086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none80 at pci0:58:10:5:    class=0x088000 card=0x00008086 chip=0x20458086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none81 at pci0:58:10:6:    class=0x088000 card=0x00008086 chip=0x20468086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none82 at pci0:58:10:7:    class=0x088000 card=0x00008086 chip=0x20478086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none83 at pci0:58:11:0:    class=0x088000 card=0x00008086 chip=0x20488086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none84 at pci0:58:11:1:    class=0x088000 card=0x00008086 chip=0x20498086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none85 at pci0:58:11:2:    class=0x088000 card=0x00008086 chip=0x204a8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none86 at pci0:58:11:3:    class=0x088000 card=0x00008086 chip=0x204b8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none87 at pci0:58:12:0:    class=0x088000 card=0x00008086 chip=0x20408086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none88 at pci0:58:12:1:    class=0x088000 card=0x00008086 chip=0x20418086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none89 at pci0:58:12:2:    class=0x088000 card=0x00008086 chip=0x20428086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none90 at pci0:58:12:3:    class=0x088000 card=0x00008086 chip=0x20438086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none91 at pci0:58:12:4:    class=0x088000 card=0x00008086 chip=0x20448086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none92 at pci0:58:12:5:    class=0x088000 card=0x00008086 chip=0x20458086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none93 at pci0:58:12:6:    class=0x088000 card=0x00008086 chip=0x20468086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none94 at pci0:58:12:7:    class=0x088000 card=0x00008086 chip=0x20478086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none95 at pci0:58:13:0:    class=0x088000 card=0x00008086 chip=0x20488086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none96 at pci0:58:13:1:    class=0x088000 card=0x00008086 chip=0x20498086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none97 at pci0:58:13:2:    class=0x088000 card=0x00008086 chip=0x204a8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none98 at pci0:58:13:3:    class=0x088000 card=0x00008086 chip=0x204b8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> mpr0 at pci0:59:0:0:       class=0x010700 card=0x080815d9 chip=0x00971000
> rev=0x02 hdr=0x00
>     vendor     = 'LSI Logic / Symbios Logic'
>     device     = 'SAS3008 PCI-Express Fusion-MPT SAS-3'
>     class      = mass storage
>     subclass   = SAS
>     bar   [10] = type I/O Port, range 32, base 0x7000, size 256, enabled
>     bar   [14] = type Memory, range 64, base 0xb8640000, size 65536,
> enabled
>     bar   [1c] = type Memory, range 64, base 0xb8600000, size 262144,
> enabled
> none99 at pci0:93:5:0:     class=0x088000 card=0x00008086 chip=0x20348086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none100 at pci0:93:5:2:    class=0x088000 card=0x00000000 chip=0x20358086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E RAS Configuration Registers'
>     class      = base peripheral
> ioapic3 at pci0:93:5:4:    class=0x080020 card=0x20368086 chip=0x20368086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
>     subclass   = interrupt controller
>     bar   [10] = type Memory, range 32, base 0xc5f00000, size 4096, enabled
> none101 at pci0:93:14:0:   class=0x110100 card=0x00008086 chip=0x20588086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = dasp
>     subclass   = performance counters
> none102 at pci0:93:14:1:   class=0x088000 card=0x00008086 chip=0x20598086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none103 at pci0:93:15:0:   class=0x110100 card=0x00008086 chip=0x20588086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = dasp
>     subclass   = performance counters
> none104 at pci0:93:15:1:   class=0x088000 card=0x00008086 chip=0x20598086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = base peripheral
> none105 at pci0:93:18:0:   class=0x110100 card=0x00008086 chip=0x204c8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E M3KTI Registers'
>     class      = dasp
>     subclass   = performance counters
> none106 at pci0:93:18:1:   class=0x110100 card=0x00008086 chip=0x204d8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E M3KTI Registers'
>     class      = dasp
>     subclass   = performance counters
> none107 at pci0:93:18:2:   class=0x088000 card=0x00008086 chip=0x204e8086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E M3KTI Registers'
>     class      = base peripheral
> none108 at pci0:93:21:0:   class=0x088000 card=0x00008086 chip=0x20188086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E M2PCI Registers'
>     class      = base peripheral
> none109 at pci0:93:22:0:   class=0x088000 card=0x00008086 chip=0x20188086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E M2PCI Registers'
>     class      = base peripheral
> none110 at pci0:93:22:4:   class=0x088000 card=0x00008086 chip=0x20188086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E M2PCI Registers'
>     class      = base peripheral
> none111 at pci0:128:4:0:   class=0x088000 card=0x00008086 chip=0x20218086
> rev=0x04 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Sky Lake-E CBDMA Registers'
>     class      = base peripheral
>     bar   [10] = type Memory, range 64, base 0x393ffff1c000, size 16384,
> enabled
> none112 at pci0:128:4:1:   class=0x088000 card=0x00008086 chip=


More information about the freebsd-questions mailing list