Not working MMC/SD reader

[Grzegorz Junka]

Hello,

I have https://www.asus.com/za/Laptops/ASUS-ZenBook-UX31E/specifications/

The MMC/SDHC reader works fine in Windows. However, FreeBSD doesn't even 
see it - I see no messages in dmesg, also no messages in the console 
when inserting/removing a SDHC card.

I have the following in /boot/loader.conf

umass_load="YES"
mmc_load="YES"
mmcsd_load="YES"
sdhci_load="YES"

Which driver should I load to be able to use the reader? I am using 
FreeBSD 11.0. pciconf shows the following:

root at ultrabook:~ # pciconf -lv
hostb0 at pci0:0:0:0:      class=0x060000 card=0x14271043 chip=0x01048086 
rev=0x09 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '2nd Generation Core Processor Family DRAM Controller'
     class      = bridge
     subclass   = HOST-PCI
vgapci0 at pci0:0:2:0:     class=0x030000 card=0x14271043 chip=0x01168086 
rev=0x09 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '2nd Generation Core Processor Family Integrated 
Graphics Controller'
     class      = display
     subclass   = VGA
none0 at pci0:0:22:0:      class=0x078000 card=0x14271043 chip=0x1c3a8086 
rev=0x04 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '6 Series/C200 Series Chipset Family MEI Controller'
     class      = simple comms
hdac0 at pci0:0:27:0:      class=0x040300 card=0x14271043 chip=0x1c208086 
rev=0x05 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '6 Series/C200 Series Chipset Family High Definition 
Audio Controller'
     class      = multimedia
     subclass   = HDA
pcib1 at pci0:0:28:0:      class=0x060400 card=0x14271043 chip=0x1c108086 
rev=0xb5 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '6 Series/C200 Series Chipset Family PCI Express Root 
Port 1'
     class      = bridge
     subclass   = PCI-PCI
pcib2 at pci0:0:28:1:      class=0x060400 card=0x14271043 chip=0x1c128086 
rev=0xb5 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '6 Series/C200 Series Chipset Family PCI Express Root 
Port 2'
     class      = bridge
     subclass   = PCI-PCI
pcib3 at pci0:0:28:3:      class=0x060400 card=0x14271043 chip=0x1c168086 
rev=0xb5 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '6 Series/C200 Series Chipset Family PCI Express Root 
Port 4'
     class      = bridge
     subclass   = PCI-PCI
ehci0 at pci0:0:29:0:      class=0x0c0320 card=0x14271043 chip=0x1c268086 
rev=0x05 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '6 Series/C200 Series Chipset Family USB Enhanced Host 
Controller'
     class      = serial bus
     subclass   = USB
isab0 at pci0:0:31:0:      class=0x060100 card=0x14271043 chip=0x1c4d8086 
rev=0x05 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'QS67 Express Chipset Family LPC Controller'
     class      = bridge
     subclass   = PCI-ISA
ahci0 at pci0:0:31:2:      class=0x010601 card=0x14271043 chip=0x1c038086 
rev=0x05 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '6 Series/C200 Series Chipset Family 6 port Mobile 
SATA AHCI Controller'
     class      = mass storage
     subclass   = SATA
none1 at pci0:0:31:3:      class=0x0c0500 card=0x14271043 chip=0x1c228086 
rev=0x05 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '6 Series/C200 Series Chipset Family SMBus Controller'
     class      = serial bus
     subclass   = SMBus
ath0 at pci0:2:0:0:        class=0x028000 card=0x20861a3b chip=0x0032168c 
rev=0x01 hdr=0x00
     vendor     = 'Qualcomm Atheros'
     device     = 'AR9485 Wireless Network Adapter'
     class      = network
xhci0 at pci0:3:0:0:       class=0x0c0330 card=0x14271043 chip=0x10091b73 
rev=0x02 hdr=0x00
     vendor     = 'Fresco Logic'
     device     = 'FL1009 USB 3.0 Host Controller'
     class      = serial bus
     subclass   = USB

Thanks

GrzegorzJ