disk or cable error? (CAM status: ATA Status Error)
Philipp Vlassakakis
freebsd-en at lists.vlassakakis.de
Mon Aug 27 09:21:24 UTC 2018
Hi,
What are the SMART values of the hard disks?
High "Reallocated Sectors Count" or anything else?
I would change the cable and run a SMART-Test on both disks.
Also make sure you have recent backups.
Regards,
> On 26. Aug 2018, at 17:01, ixbug at riseup.net wrote:
>
> Hello,
>
> since 3 days I get these errors on my FreeBSD 11.2 server
> which has two (WDC WD1005FBYZ-01YCBB2) disks (ZFS mirror):
>
> (ada1:ahcich1:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 90 a4 aa 40 1d 00 00 00 00 00
> (ada1:ahcich1:0:0:0): CAM status: ATA Status Error
> (ada1:ahcich1:0:0:0): ATA status: 41 (DRDY ERR), error: 10 (IDNF )
> (ada1:ahcich1:0:0:0): RES: 41 10 90 a4 aa 00 1d 00 00 00 00
> (ada1:ahcich1:0:0:0): Retrying command
> (ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 60 38 7e 06 40 2e 00 00 00 00 00
> (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
> (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 10 (IDNF )
> (ada0:ahcich0:0:0:0): RES: 41 10 38 7e 06 00 2e 00 00 00 00
> (ada0:ahcich0:0:0:0): Retrying command
>
> note that both affect both disks (ada0 + ada1).
>
> frequency: about 30 times per day.
>
> zpool status is fine.
>
>
> since last night also smartctl complains:
>
> smartctl -a /dev/ada0 (ada1 followed 6 hours later with the same output)
> output:
> "
> Error 1 occurred
> When the command that caused the error occurred, the device was in an unknown state.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 04 51 00 00 00 00 00 Error: ABRT
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
>
> "
>
> Do any of these errors provide hints as to whether this is a disk error affecting both at the same time
> or broken cable? (both disks are connected to the mainboard via the same cable)
>
>
> thanks in advance,
> ixbug
>
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
More information about the freebsd-questions
mailing list