Need help

[Eric Joyner]

Igor,

A red flag is that it doesn't have an entry in the pci ids database, even
though I350's are very common and normal devices. It also doesn't appear in
the Linux igb driver.

I think something is wrong with your card.

- Eric

On Tue, Sep 12, 2017 at 12:42 AM Igor V. Ruzanov <igorr at pochta.canmos.ru>
wrote:

> Hello, FreeBSD colleagues!
>
> I have modern network card Intel i350T2V2 (peripheral dual gigabit port
> NIC). And as far as i know all Intel cards should be normally detected by
> the system. But with this NIC i have some troubles:
> - the system sees the card as some ethernet device but cannot find
> proper (igb) driver:
> pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.2 on pci0
> pci6: <ACPI PCI bus> on pcib6
> pci6: <network, ethernet> at device 0.0 (no driver attached)
> pci6: <network, ethernet> at device 0.1 (no driver attached)
> - its from dmesg log.
>
> Fnd `pciconf -lcvb' says:
> none75 at pci0:6:0:0:      class=0x020000 card=0x00008086 chip=0x151f8086
> rev=0x01 hdr=0x00
>      vendor     = 'Intel Corporation'
>      class      = network
>      subclass   = ethernet
>      bar   [10] = type Memory, range 32, base 0x91920000, size 131072,
> enabled
>      bar   [18] = type I/O Port, range 32, base 0x2020, size 32, enabled
>      bar   [1c] = type Memory, range 32, base 0x919c4000, size 16384,
> enabled
>      cap 01[40] = powerspec 3  supports D0 D3  current D0
>      cap 05[50] = MSI supports 1 message, 64 bit, vector masks
>      cap 11[70] = MSI-X supports 10 messages
>                   Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
>      cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR RO NS link
> x4(x4)
>                   speed 5.0(5.0) ASPM disabled(L0s/L1)
>      ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected
>      ecap 000e[150] = ARI 1
>      ecap 0010[160] = SRIOV 1
>      ecap 0017[1a0] = TPH Requester 1
>      ecap 0018[1c0] = LTR 1
>      ecap 000d[1d0] = ACS 1
> none76 at pci0:6:0:1:      class=0x020000 card=0x00008086 chip=0x151f8086
> rev=0x01 hdr=0x00
>      vendor     = 'Intel Corporation'
>      class      = network
>      subclass   = ethernet
>      bar   [10] = type Memory, range 32, base 0x91900000, size 131072,
> enabled
>      bar   [18] = type I/O Port, range 32, base 0x2000, size 32, enabled
>      bar   [1c] = type Memory, range 32, base 0x919c0000, size 16384,
> enabled
>      cap 01[40] = powerspec 3  supports D0 D3  current D0
>      cap 05[50] = MSI supports 1 message, 64 bit, vector masks
>      cap 11[70] = MSI-X supports 10 messages
>                   Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
>      cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR RO NS link
> x4(x4)
>                   speed 5.0(5.0) ASPM disabled(L0s/L1)
>      ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected
>      ecap 000e[150] = ARI 1
>      ecap 0010[160] = SRIOV 1
>      ecap 0017[1a0] = TPH Requester 1
>      ecap 000d[1d0] = ACS 1
>
> My server is:
> - system is FreeBSD-10.3-RELEASE-p20
> - motherboard: Intel S2600WT (dual CPU socket board)
> - one CPU installed
>
> Maybe someone has experience with this inetl NIC? As seen from pciconf
> output the NIC has a set of VFs (Virtual Functions) needed in
> virtualization environments. And chip id is 0x151F8086 - the id that
> igb-driver does not know about. Maybe i need some preconfiguration of this
> card? Or this device is not compatible with non-virtualization systems
> like usual physical server?
>
> Big thanks in advance!
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "
> freebsd-questions-unsubscribe at freebsd.org"
>