gptid, diskid and ufsid appears after power-cut and fsck
Steve Burton
steve at sliderule.demon.co.uk
Mon Jun 19 16:06:17 UTC 2017
Hi,
I've just had a brief power-cut which froze both of my FreeBSD 10.3 REL
servers. Both machines correctly found that / hadn't been correctly
dismounted. After restarting them in single user mode and running 'fsck
/' (twice) until the file system was clean, I rebooted them in
multi-user mode.
One of them needed a while while the /root mirror was rebuilt. Mirrors
are managed by gmirror.
As they both show similar symptoms I'll concentrate on one server from here.
When I run gstat I get:
dT: 1.044s w: 1.000s
L(q) ops/s r/s kBps ms/r w/s kBps ms/w %busy Name
0 0 0 0 0.0 0 0 0.0 0.0| ada0
0 0 0 0 0.0 0 0 0.0 0.0| ada1
0 0 0 0 0.0 0 0 0.0 0.0| ada2
0 0 0 0 0.0 0 0 0.0 0.0| ada0p1
0 0 0 0 0.0 0 0 0.0 0.0| ada0p2
0 0 0 0 0.0 0 0 0.0 0.0| ada0p3
0 0 0 0 0.0 0 0 0.0 0.0| ada1p1
0 0 0 0 0.0 0 0 0.0 0.0| ada1p2
0 0 0 0 0.0 0 0 0.0 0.0| ada1p3
0 0 0 0 0.0 0 0 0.0 0.0| ada2p1
0 0 0 0 0.0 0 0 0.0 0.0| ada2p2
0 0 0 0 0.0 0 0 0.0 0.0| ada2p3
0 0 0 0 0.0 0 0 0.0 0.0|
ufsid/56d1ad46957
f05f1
0 0 0 0 0.0 0 0 0.0 0.0|
diskid/DISK-Z3T7P
0J4
0 0 0 0 0.0 0 0 0.0 0.0| mirror/boot
0 0 0 0 0.0 0 0 0.0 0.0| mirror/swap
0 0 0 0 0.0 0 0 0.0 0.0| mirror/root
0 0 0 0 0.0 0 0 0.0 0.0|
gptid/41ddec89-70
fc-11e5-89b5-9cb65407dd34
0 0 0 0 0.0 0 0 0.0 0.0|
ufsid/561bdc9be2
Previously, the ufsid's, diskid's and gptid's didn't appear in this list
and my questions are:
Should I be concerned and how do correct this?
root at dc1:~ # dmesg | grep ada
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA8-ACS SATA 3.x device
ada0: Serial Number WD-WCATRC668492
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad6
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA8-ACS SATA 3.x device
ada1: Serial Number WD-WCATRC668411
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad8
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <VB0250EAVER HPG7> ATA8-ACS SATA 2.x device
ada2: Serial Number Z3T7P0J4
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 238475MB (488397168 512 byte sectors)
ada2: Previously was known as ad10
Any and all help appreciated, most of my disk knowledge predates ufs2,
gptid etc
Steve.
More information about the freebsd-questions
mailing list