IPMITool questions:

[James B. Byrne]

This is what I presently have in loader.conf on the target system, all
of which has been added by configuration programs.  In other words,
there has been no direct editing of this file:

# cat /boot/loader.conf
geli_ada0p4_keyfile0_type="ada0p4:geli_keyfile0"
geli_ada0p4_keyfile0_name="/boot/encryption.key"
geli_ada1p4_keyfile0_load="YES"
geli_ada1p4_keyfile0_type="ada1p4:geli_keyfile0"
geli_ada1p4_keyfile0_name="/boot/encryption.key"
geli_ada2p4_keyfile0_load="YES"
geli_ada2p4_keyfile0_type="ada2p4:geli_keyfile0"
geli_ada2p4_keyfile0_name="/boot/encryption.key"
geli_ada3p4_keyfile0_load="YES"
geli_ada3p4_keyfile0_type="ada3p4:geli_keyfile0"
geli_ada3p4_keyfile0_name="/boot/encryption.key"
aesni_load="YES"
geom_eli_load="YES"
geom_eli_passphrase_prompt="YES"
vfs.root.mountfrom="zfs:zroot/ROOT/default"
kern.geom.label.gptid.enable="0"
zpool_cache_load="YES"
zpool_cache_type="/boot/zfs/zpool.cache"
zpool_cache_name="/boot/zfs/zpool.cache"
zfs_load="YES"
vmn_load="YES"
nmdm_load="YES"
if_bridge_load="YES"
if_tap_load="YES"

And this is what I have in /etc/ttys:

# cat /etc/ttys
# status Must be on or off.  If on, init will run the getty program on
#        the specified port.  If the word "secure" appears, this tty
#        allows root login.
#
# name  getty                  type     status   comments
#
# If console is marked "insecure", then init will ask for the root
password
# when going to single-user mode.
console none             unknown        off secure
#
ttyv0   "/usr/libexec/getty Pc"         xterm   on  secure
# Virtual terminals
ttyv1   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv2   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv3   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv4   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv5   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv6   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv7   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv8   "/usr/local/bin/xdm -nodaemon"  xterm   off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0   "/usr/libexec/getty 3wire"      vt100   onifconsole secure
ttyu1   "/usr/libexec/getty 3wire"      vt100   onifconsole secure
ttyu2   "/usr/libexec/getty 3wire"      vt100   onifconsole secure
ttyu3   "/usr/libexec/getty 3wire"      vt100   onifconsole secure
# Dumb console
dcons   "/usr/libexec/getty std.9600"   vt100   off secure

-- 
***          e-Mail is NOT a SECURE channel          ***
        Do NOT transmit sensitive data via e-Mail
 Do NOT open attachments nor follow links sent by e-Mail

James B. Byrne                mailto:ByrneJB at Harte-Lyne.ca
Harte & Lyne Limited          http://www.harte-lyne.ca
9 Brockley Drive              vox: +1 905 561 1241
Hamilton, Ontario             fax: +1 905 561 0757
Canada  L8E 3C3