how to downgrade X server
Will Parsons
varro at nodomain.invalid
Tue Mar 29 17:24:03 UTC 2016
Warren Block wrote:
> On Mon, 28 Mar 2016, Will Parsons wrote:
>
>> I haven't been using one. The Xorg log shows:
>> ...
>
> The fbdev errors are ignorable. Is that the entire log? The Intel
> HD3000 should work fine.
No - I just started with the first errror messages. I've included the
entire log below.
> As a start, please describe your hardware. Some notebooks have hybrid
> graphics like Optimus which are a problem. If that is not present,
> defining just the device in xorg.conf.d might be all that is needed.
It's a Lenovo Edge E520 laptop - see below for info from dmesg.
Any help is much appreciated.
Xorg.0.log:
==========
[ 80.043]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 80.043] X Protocol Version 11, Revision 0
[ 80.043] Build Operating System: FreeBSD 9.3-RELEASE-p39 i386
[ 80.043] Current Operating System: FreeBSD anukis.local 9.3-RELEASE-p21 FreeBSD 9.3-RELEASE-p21 #0: Tue Jul 28 08:57:41 UTC 2015 root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
[ 80.043] Build Date: 26 March 2016 03:53:10AM
[ 80.043]
[ 80.043] Current version of pixman: 0.34.0
[ 80.043] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 80.043] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 80.044] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 29 12:53:57 2016
[ 80.129] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 80.151] (==) No Layout section. Using the first Screen section.
[ 80.151] (==) No screen section available. Using defaults.
[ 80.151] (**) |-->Screen "Default Screen Section" (0)
[ 80.151] (**) | |-->Monitor "<default monitor>"
[ 80.152] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 80.152] (==) Automatically adding devices
[ 80.152] (==) Automatically enabling devices
[ 80.152] (==) Not automatically adding GPU devices
[ 80.376] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 80.376] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 80.376] (II) The server relies on devd to provide the list of input devices.
If no devices become available, reconfigure devd or disable AutoAddDevices.
[ 80.376] (II) Loader magic: 0x8226b40
[ 80.376] (II) Module ABI versions:
[ 80.376] X.Org ANSI C Emulation: 0.4
[ 80.376] X.Org Video Driver: 19.0
[ 80.376] X.Org XInput driver : 21.0
[ 80.376] X.Org Server Extension : 9.0
[ 80.399] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21e2 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/65536
[ 80.400] (II) LoadModule: "glx"
[ 80.457] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 80.629] (II) Module glx: vendor="X.Org Foundation"
[ 80.629] compiled for 1.17.4, module version = 1.0.0
[ 80.629] ABI class: X.Org Server Extension, version 9.0
[ 80.629] (==) AIGLX enabled
[ 80.630] (==) Matched intel as autoconfigured driver 0
[ 80.630] (==) Matched fbdev as autoconfigured driver 1
[ 80.630] (==) Matched vesa as autoconfigured driver 2
[ 80.630] (==) Assigned the driver to the xf86ConfigLayout
[ 80.630] (II) LoadModule: "intel"
[ 80.630] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 80.665] (II) Module intel: vendor="X.Org Foundation"
[ 80.665] compiled for 1.17.4, module version = 2.21.15
[ 80.665] Module class: X.Org Video Driver
[ 80.665] ABI class: X.Org Video Driver, version 19.0
[ 80.665] (II) LoadModule: "fbdev"
[ 80.665] (II) Loading /usr/local/lib/xorg/modules/drivers/fbdev_drv.so
[ 80.679] (II) Module fbdev: vendor="X.Org Foundation"
[ 80.679] compiled for 1.17.4, module version = 0.4.4
[ 80.679] Module class: X.Org Video Driver
[ 80.679] ABI class: X.Org Video Driver, version 19.0
[ 80.679] (II) LoadModule: "vesa"
[ 80.680] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 80.689] (II) Module vesa: vendor="X.Org Foundation"
[ 80.689] compiled for 1.17.4, module version = 2.3.4
[ 80.689] Module class: X.Org Video Driver
[ 80.689] ABI class: X.Org Video Driver, version 19.0
[ 80.689] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 80.691] (II) FBDEV: driver for framebuffer: fbdev
[ 80.691] (II) VESA: driver for VESA chipsets: vesa
[ 80.691] (--) Using syscons driver with X support (version 2.0)
[ 80.691] (--) using VT number 9
[ 81.644] (WW) Falling back to old probe method for fbdev
[ 81.644] (II) Loading sub module "fbdevhw"
[ 81.644] (II) LoadModule: "fbdevhw"
[ 81.669] (II) Loading /usr/local/lib/xorg/modules/libfbdevhw.so
[ 81.679] (EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data object.
[ 81.679] (II) UnloadModule: "fbdevhw"
[ 81.679] (II) Unloading fbdevhw
[ 81.679] (EE) Failed to load module "fbdevhw" (invalid module, 0)
[ 81.679] (WW) Falling back to old probe method for vesa
[ 81.679] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 81.680] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 81.680] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 81.680] (==) intel(0): RGB weight 888
[ 81.680] (==) intel(0): Default visual is TrueColor
[ 81.680] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 81.687] (**) intel(0): Relaxed fencing enabled
[ 81.687] (**) intel(0): Wait on SwapBuffers? enabled
[ 81.687] (**) intel(0): Triple buffering? enabled
[ 81.687] (**) intel(0): Framebuffer tiled
[ 81.687] (**) intel(0): Pixmaps tiled
[ 81.687] (**) intel(0): 3D buffers tiled
[ 81.687] (**) intel(0): SwapBuffers wait enabled
[ 81.687] (==) intel(0): video overlay key set to 0x101fe
[ 81.687] (II) intel(0): Output LVDS1 has no monitor section
[ 81.706] (II) intel(0): Output VGA1 has no monitor section
[ 81.711] (II) intel(0): Output HDMI1 has no monitor section
[ 81.720] (II) intel(0): Output DP1 has no monitor section
[ 81.732] (II) intel(0): EDID for output LVDS1
[ 81.732] (II) intel(0): Manufacturer: LGD Model: 2e3 Serial#: 0
[ 81.732] (II) intel(0): Year: 2010 Week: 0
[ 81.732] (II) intel(0): EDID Version: 1.3
[ 81.732] (II) intel(0): Digital Display Input
[ 81.732] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 81.732] (II) intel(0): Gamma: 2.20
[ 81.732] (II) intel(0): No DPMS capabilities specified
[ 81.732] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 81.732] (II) intel(0): First detailed timing is preferred mode
[ 81.732] (II) intel(0): redX: 0.613 redY: 0.371 greenX: 0.350 greenY: 0.606
[ 81.732] (II) intel(0): blueX: 0.152 blueY: 0.099 whiteX: 0.313 whiteY: 0.329
[ 81.732] (II) intel(0): Manufacturer's mask: 0
[ 81.732] (II) intel(0): Supported detailed timing:
[ 81.732] (II) intel(0): clock: 70.0 MHz Image Size: 344 x 194 mm
[ 81.732] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1492 h_border: 0
[ 81.732] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 782 v_border: 0
[ 81.732] (II) intel(0): LG Display
[ 81.732] (II) intel(0): LP156WH4-TLB1
[ 81.732] (II) intel(0): EDID (in hex):
[ 81.732] (II) intel(0): 00ffffffffffff0030e4e30200000000
[ 81.732] (II) intel(0): 00140103802213780a09159d5f599b27
[ 81.732] (II) intel(0): 19505400000001010101010101010101
[ 81.732] (II) intel(0): 010101010101581b567e50000e302430
[ 81.732] (II) intel(0): 350058c2100000190000000000000000
[ 81.732] (II) intel(0): 00000000000000000000000000fe004c
[ 81.732] (II) intel(0): 4720446973706c61790a2020000000fe
[ 81.732] (II) intel(0): 004c503135365748342d544c42310001
[ 81.732] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 81.732] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 81.732] (II) intel(0): Printing probed modes for output LVDS1
[ 81.732] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 81.732] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 81.732] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 81.732] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 81.732] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 81.751] (II) intel(0): EDID for output VGA1
[ 81.751] (II) intel(0): Manufacturer: EPI Model: e781 Serial#: 4909
[ 81.751] (II) intel(0): Year: 2002 Week: 30
[ 81.751] (II) intel(0): EDID Version: 1.3
[ 81.751] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 81.751] (II) intel(0): Sync: Separate
[ 81.751] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 81.751] (II) intel(0): Gamma: 2.20
[ 81.751] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 81.751] (II) intel(0): First detailed timing is preferred mode
[ 81.751] (II) intel(0): redX: 0.640 redY: 0.347 greenX: 0.302 greenY: 0.587
[ 81.751] (II) intel(0): blueX: 0.143 blueY: 0.099 whiteX: 0.321 whiteY: 0.338
[ 81.751] (II) intel(0): Supported established timings:
[ 81.751] (II) intel(0): 720x400 at 70Hz
[ 81.751] (II) intel(0): 640x480 at 60Hz
[ 81.751] (II) intel(0): 640x480 at 67Hz
[ 81.751] (II) intel(0): 640x480 at 72Hz
[ 81.751] (II) intel(0): 640x480 at 75Hz
[ 81.751] (II) intel(0): 800x600 at 56Hz
[ 81.751] (II) intel(0): 800x600 at 60Hz
[ 81.751] (II) intel(0): 800x600 at 72Hz
[ 81.751] (II) intel(0): 800x600 at 75Hz
[ 81.751] (II) intel(0): 832x624 at 75Hz
[ 81.751] (II) intel(0): 1024x768 at 60Hz
[ 81.751] (II) intel(0): 1024x768 at 70Hz
[ 81.751] (II) intel(0): 1024x768 at 75Hz
[ 81.751] (II) intel(0): 1280x1024 at 75Hz
[ 81.751] (II) intel(0): Manufacturer's mask: 0
[ 81.751] (II) intel(0): Supported detailed timing:
[ 81.751] (II) intel(0): clock: 135.0 MHz Image Size: 340 x 270 mm
[ 81.751] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 81.751] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 81.751] (II) intel(0): Serial No: T7KB27AG04909
[ 81.751] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 135 MHz
[ 81.751] (II) intel(0): Monitor name: EN-7100s
[ 81.751] (II) intel(0): EDID (in hex):
[ 81.751] (II) intel(0): 00ffffffffffff00160981e72d130000
[ 81.751] (II) intel(0): 1e0c010368221b782af596a3584d9624
[ 81.751] (II) intel(0): 195256bfef0001010101010101010101
[ 81.751] (II) intel(0): 010101010101bc34009851002a401090
[ 81.751] (II) intel(0): 1300540e11000018000000ff0054374b
[ 81.751] (II) intel(0): 42323741473034393039000000fd0037
[ 81.751] (II) intel(0): 4b1e500d000a202020202020000000fc
[ 81.751] (II) intel(0): 00454e2d37313030730a2020202000ea
[ 81.751] (II) intel(0): Printing probed modes for output VGA1
[ 81.751] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz eP)
[ 81.751] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 81.751] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 81.751] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 81.752] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 81.752] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 81.752] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 81.752] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 81.752] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 81.752] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 81.752] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 81.752] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 81.752] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 81.752] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 81.752] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 81.756] (II) intel(0): EDID for output HDMI1
[ 81.765] (II) intel(0): EDID for output DP1
[ 81.765] (II) intel(0): Output LVDS1 connected
[ 81.765] (II) intel(0): Output VGA1 connected
[ 81.765] (II) intel(0): Output HDMI1 disconnected
[ 81.765] (II) intel(0): Output DP1 disconnected
[ 81.765] (II) intel(0): Using fuzzy aspect match for initial modes
[ 81.765] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 81.765] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 81.765] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 81.765] (II) intel(0): Kernel page flipping support detected, enabling
[ 81.765] (==) intel(0): DPI set to (96, 96)
[ 81.765] (II) Loading sub module "fb"
[ 81.765] (II) LoadModule: "fb"
[ 81.765] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 81.782] (II) Module fb: vendor="X.Org Foundation"
[ 81.782] compiled for 1.17.4, module version = 1.0.0
[ 81.782] ABI class: X.Org ANSI C Emulation, version 0.4
[ 81.782] (II) Loading sub module "dri2"
[ 81.782] (II) LoadModule: "dri2"
[ 81.782] (II) Module "dri2" already built-in
[ 81.782] (II) UnloadModule: "fbdev"
[ 81.782] (II) Unloading fbdev
[ 81.782] (II) UnloadModule: "vesa"
[ 81.782] (II) Unloading vesa
[ 81.782] (==) Depth 24 pixmap format is 32 bpp
[ 81.782] (II) intel(0): [DRI2] Setup complete
[ 81.782] (II) intel(0): [DRI2] DRI driver: i965
[ 81.782] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 81.827] (II) UXA(0): Driver registered support for the following operations:
[ 81.827] (II) solid
[ 81.827] (II) copy
[ 81.827] (II) composite (RENDER acceleration)
[ 81.827] (II) put_image
[ 81.827] (II) get_image
[ 81.836] (==) intel(0): Backing store enabled
[ 81.836] (==) intel(0): Silken mouse enabled
[ 81.837] (II) intel(0): Initializing HW Cursor
[ 81.837] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 81.850] (==) intel(0): DPMS enabled
[ 81.850] (==) intel(0): Intel XvMC decoder enabled
[ 81.850] (II) intel(0): Set up textured video
[ 81.851] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 81.851] (II) intel(0): direct rendering: DRI2 Enabled
[ 82.163] (--) RandR disabled
dmesg output:
=============
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p21 #0: Tue Jul 28 08:57:41 UTC 2015
root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (2494.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x17bae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3048456192 (2907 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-8H >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-8H> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 20000000, 200000 (3) failed
acpi0: reservation of 40000000, 200000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2+ IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd260a000-0xd260a3ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xd2600000-0xd2603fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xd0404000-0xd0404fff,0xd0400000-0xd0403fff irq 17 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: f0:de:f1:e1:73:7c
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci8: <ACPI PCI bus> on pcib4
iwn0: <Intel Centrino Wireless-N 1000> mem 0xd1d00000-0xd1d01fff irq 19 at device 0.0 on pci8
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci9: <ACPI PCI bus> on pcib5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd2609000-0xd26093ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x5088-0x508f,0x5094-0x5097,0x5080-0x5087,0x5090-0x5093,0x5060-0x507f mem 0xd2608000-0xd26087ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Conexant CX20590 HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20590 Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20590 (Analog)> at nid 31 and 27 on hdaa0
pcm1: <Conexant CX20590 (Analog)> at nid 25 and 35 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 5 on hdaa1
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ACPI Error: No handler for Region [ECRM] (0xc7c113c0) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_TZ_.RDEC] (Node 0xc7babb20), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._TMP] (Node 0xc7babac0), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: No handler for Region [ECRM] (0xc7c11500) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_TZ_.MDEC] (Node 0xc7babb00), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._SCP] (Node 0xc7baba80), AE_NOT_EXIST (20110527/psparse-560)
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HITACHI HTS727550A9E364 JF3ZD0H0> ATA-8 SATA 2.x device
ada0: Serial Number J3350080GM11TC
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 1H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD-RW DS8A8SH KL31> Removable CD-ROM SCSI-0 device
cd0: Serial Number S45N7592Z1ZKBE01AG4L
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1247194466 Hz quality 1000
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <vendor 0x0409> at usbus0
uhub4: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 3> on usbus0
ugen1.3: <Logitech> at usbus1
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
kbd2 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
uhub4: 4 ports with 4 removable, self powered
ugen0.4: <CHICONY> at usbus0
ukbd1: <CHICONY USB NetVista Full Width Keyboard, class 0/0, rev 1.10/1.02, addr 4> on usbus0
kbd3 at ukbd1
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.5: <Ricoh Company Ltd.> at usbus0
Trying to mount root from ufs:/dev/ada0s3a [rw]...
ACPI Error: No handler for Region [ECRM] (0xc7c11540) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_TZ_.RDEC] (Node 0xc7babb20), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._TMP] (Node 0xc7babac0), AE_NOT_EXIST (20110527/psparse-560)
acpi_tz0: error fetching current temperature -- AE_NOT_EXIST
wlan0: Ethernet address: 74:e5:0b:db:0e:20
More information about the freebsd-questions
mailing list