ath0 messages spamming /var/log/messages

[Adrian Chadd]

Try updating to -head. I've implemented more of those missing routines.


-a


On 29 December 2015 at 02:26, John <freebsd-lists at potato.growveg.org> wrote:
> Hello list,
>
> On an acer laptop I'm running 10.2 r292394. Wireless on this is seen
> as Atheros AR9485 and it runs fine apart from it spamming
> /var/log/messages with this:
>
> Dec 29 10:12:07 acer kernel: Limiting closed port RST response from
> 210 to 200 packets/sec
> Dec 29 10:12:09 acer kernel: Limiting closed port RST response from
> 215 to 200 packets/sec
> Dec 29 10:12:11 acer kernel: Limiting closed port RST response from
> 220 to 200 packets/sec
> Dec 29 10:12:20 acer kernel: ar9300_Stub_GetAntennaSwitch: called
> Dec 29 10:12:20 acer kernel: ar9300_Stub_GetAntennaSwitch: called
> Dec 29 10:12:20 acer kernel: ar9300_Stub_GetCTSTimeout: called
> Dec 29 10:12:20 acer kernel: ar9300_Stub_GetCTSTimeout: called
> Dec 29 10:12:41 acer kernel: ar9300_Stub_GetAntennaSwitch: called
> Dec 29 10:12:41 acer kernel: ar9300_Stub_GetAntennaSwitch: called
> Dec 29 10:12:41 acer kernel: ar9300_Stub_GetCTSTimeout: called
> Dec 29 10:12:41 acer kernel: ar9300_Stub_GetCTSTimeout: called
> Dec 29 10:13:01 acer kernel: ar9300_Stub_GetAntennaSwitch: called
> Dec 29 10:13:01 acer kernel: ar9300_Stub_GetAntennaSwitch: called
>
> Is there a tweak or something I can invoke to stop this from
> happening? The on-board wifi is seen as:
>
> ath0: <Atheros AR9485> mem 0xf0100000-0xf017ffff irq 17 at device 0.0
> on pci2
>
> Initial output from dmesg.boot shows this:
>
> ar9300_set_stub_functions: setting stub functions
> ar9300_set_stub_functions: setting stub functions
> ar9300_attach: calling ar9300_hw_attach
> ar9300_hw_attach: calling ar9300_eeprom_attach
> ar9300_flash_map: unimplemented for now
> Restoring Cal data from DRAM
> Restoring Cal data from EEPROM
> Restoring Cal data from Flash
> Restoring Cal data from Flash
> Restoring Cal data from OTP
> ar9300_hw_attach: ar9300_eeprom_attach returned 0
> ath0: RX status length: 48
> ath0: RX buffer size: 4096
> ath0: TX descriptor length: 128
> ath0: TX status length: 36
> ath0: TX buffers per descriptor: 4
> ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
> ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
> ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
> ath0: [HT] enabling HT modes
> ath0: [HT] enabling short-GI in 20MHz mode
> ath0: [HT] 1 stream STBC receive enabled
> ath0: [HT] 1 RX streams; 1 TX streams
> ath0: AR9485 mac 576.1 RF5110 phy 33.0
> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
>
> The wifi works fine apart from the chatty output.
>
> thanks,
> --
> John _______________________________________________
> freebsd-questions at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"