BCM57810 interface can't go up with NPAR enabled
Bin LIU
binliu.lqbn at gmail.com
Fri Feb 27 05:45:40 UTC 2015
Hi,
I'm testing the Dell Broadcom Dual Port 10G interface card with NPAR
function enabled on 9-stable-r277476M, I can see all 8 interfaces(bxe0 to
bxe7), but only bxe0 and bxe1 are active, the other 6 status are all "no
carrier".
dmesg reports the following:
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe3: bxe4: WARNING: Interface link is down, ignoring transmit request
WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
bxe3: WARNING: Interface link is down, ignoring transmit request
bxe5: WARNING: Interface link is down, ignoring transmit request
bxe4: WARNING: Interface link is down, ignoring transmit request
And here is the device info:
bxe0 at pci0:3:0:0: class=0x020000 card=0x100814e4 chip=0x16ae14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function'
class = network
subclass = ethernet
bxe1 at pci0:3:0:1: class=0x020000 card=0x100814e4 chip=0x16ae14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function'
class = network
subclass = ethernet
bxe2 at pci0:3:0:2: class=0x020000 card=0x100814e4 chip=0x16ae14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function'
class = network
subclass = ethernet
bxe3 at pci0:3:0:3: class=0x020000 card=0x100814e4 chip=0x16ae14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function'
class = network
subclass = ethernet
bxe4 at pci0:3:0:4: class=0x020000 card=0x100814e4 chip=0x16ae14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function'
class = network
subclass = ethernet
bxe5 at pci0:3:0:5: class=0x020000 card=0x100814e4 chip=0x16ae14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function'
class = network
subclass = ethernet
bxe6 at pci0:3:0:6: class=0x020000 card=0x100814e4 chip=0x16ae14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function'
class = network
subclass = ethernet
bxe7 at pci0:3:0:7: class=0x020000 card=0x100814e4 chip=0x16ae14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function'
class = network
subclass = ethernet
Many thanks if you can give me some suggestions, thanks you!
More information about the freebsd-questions
mailing list