jme interface bounces up and down, up and down....

[Brett Glass]

At 06:57 PM 9/16/2014, Yonghyeon PYUN wrote:

>Then, probably the only available option to establish a link against
>the switch would be using reduced speed(100Mbps) with ifconfig(8).
>If you can't reduce the speed due to other reasons I'm afraid there
>is no way to establish a link at this moment.  As I said in previous
>mail, did you check what resolved speed Linux shows?

I exorcised Linux from the router and replaced it with a little
red daemon. ;-)

The system has no CD-ROM, but perhaps I can scrounge a USB CD-ROM
drive and a live system CD to boot from.

>Also it would be good idea to know whether you're really seeing the
>PHY hardware issue or not.  Directly connect the jme(4) to other
>box without switch and see whether jme(4) can establish a 1000baseT
>link.

Will have to try this as well. In the future, though, I will be wary
of buying ANYTHING with hardware from JMicron in it.

--Brett Glass