i have some problem

[Olivier Nicole]

Pat,

> we use smartctl -a /dev/da0
> but can not check HDD so i would like to know about problem.

I think the reason is because smartctl is used to control a physical hard disk.

But you have a hardware RAID, so /dev/da0 is not a physical hard disk,
it is a RAID disk. RAID card does not support SMART.

Best regards,

Olivier

>
> Detail of smartctl 6.0
>
> smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build)
> Copyright (coffee) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
>
> Vendor:               LSI
> Product:              Logical Volume
> Revision:             3000
> User Capacity:        291,999,055,872 bytes [291 GB]
> Logical block size:   512 bytes
> Logical Unit id:      0x600508e000000000848d5098fa521d01
> Device type:          disk
> Local Time is:        Thu Nov  7 14:11:55 2013 ICT
> Device does not support SMART
>
> Error Counter logging not supported
> Device does not support Self Test logging
>
> we use raid card is pile 2008 setup raid 10
>
> it is detail raid card http://www.asus.com/Commercial_Servers_Workstations/PIKE_2008/
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"