route problem

[Pol Hallen]

> If you don't mind could you post the output of ifconfig from both boxes?

server1:

re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 70:71:bc:94:c3:6d
	inet 192.168.1.250 netmask 0xffffff00 broadcast 192.168.1.255
	inet6 fe80::7271:bcff:fe94:c36d%re0 prefixlen 64 scopeid 0x1
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80008<VLAN_MTU,LINKSTATE>
	ether 00:60:08:6d:59:50
	inet 192.168.2.250 netmask 0xffffff00 broadcast 192.168.2.255
	inet6 fe80::260:8ff:fe6d:5950%xl0 prefixlen 64 scopeid 0x7
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
	inet 127.0.0.1 netmask 0xff000000
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

server2

fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=2009<RXCSUM,VLAN_MTU,WOL_MAGIC>
	ether 00:0f:fe:b3:db:8c
	inet6 fe80::20f:feff:feb3:db8c%fxp0 prefixlen 64 scopeid 0x6
	inet 192.168.2.52 netmask 0xffffff00 broadcast 192.168.2.255
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
	inet 127.0.0.1 netmask 0xff000000
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>