snd_hda and front headphones jack

[Mark Felder]

Hi guys,

I seem to be having problems getting my front headphones jack to work.  
I've read the snd_hda man page and perhaps I'm doing this wrong, but  
here's my setup:


dev.hdaa.4.%desc: Conexant CX20641 Audio Function Group
dev.hdaa.0.nid5_original: 0x18560010 as=1 seq=0 device=Digital-out  
conn=Jack ctype=Digital loc=0x18 color=Unknown misc=0
dev.hdaa.1.nid5_original: 0x18560010 as=1 seq=0 device=Digital-out  
conn=Jack ctype=Digital loc=0x18 color=Unknown misc=0
dev.hdaa.2.nid5_original: 0x18560010 as=1 seq=0 device=Digital-out  
conn=Jack ctype=Digital loc=0x18 color=Unknown misc=0
dev.hdaa.3.nid5_original: 0x18560010 as=1 seq=0 device=Digital-out  
conn=Jack ctype=Digital loc=0x18 color=Unknown misc=0
dev.hdaa.4.nid24_original: 0x40f001f0 as=15 seq=0 device=Other conn=None  
ctype=Unknown loc=0x00 color=Unknown misc=1
dev.hdaa.4.nid25_original: 0x02214040 as=4 seq=0 device=Headphones  
conn=Jack ctype=1/8 loc=Front color=Green misc=0
dev.hdaa.4.nid26_original: 0x02a19020 as=2 seq=0 device=Mic conn=Jack  
ctype=1/8 loc=Front color=Pink misc=0
dev.hdaa.4.nid27_original: 0x01a1903e as=3 seq=14 device=Mic conn=Jack  
ctype=1/8 loc=Rear color=Pink misc=0
dev.hdaa.4.nid28_original: 0x01014010 as=1 seq=0 device=Line-out conn=Jack  
ctype=1/8 loc=Rear color=Green misc=0
dev.hdaa.4.nid29_original: 0x01813030 as=3 seq=0 device=Line-in conn=Jack  
ctype=1/8 loc=Rear color=Blue misc=0
dev.hdaa.4.nid30_original: 0x40f001f0 as=15 seq=0 device=Other conn=None  
ctype=Unknown loc=0x00 color=Unknown misc=1
dev.hdaa.4.nid31_original: 0x9217011f as=1 seq=15 device=Speaker  
conn=Fixed ctype=Analog loc=0x12 color=Unknown misc=1
dev.hdaa.4.nid32_original: 0x40f001f0 as=15 seq=0 device=Other conn=None  
ctype=Unknown loc=0x00 color=Unknown misc=1
dev.hdaa.4.nid33_original: 0x40f001f0 as=15 seq=0 device=Other conn=None  
ctype=Unknown loc=0x00 color=Unknown misc=1
dev.hdaa.4.nid38_original: 0x40f001ff as=15 seq=15 device=Other conn=None  
ctype=Unknown loc=0x00 color=Unknown misc=1


If I am looking at this right I believe I need to set nid25 to as=1 which  
matches the nid31 Speaker and probably also set seq=15. However, this  
doesn't seem to be working. Am I overlooking something obvious?


Thanks