gmirror degraded

Robert Fitzpatrick robert at webtent.org
Thu Oct 11 14:47:12 UTC 2012


Just looking for some advice, I had a server lock up that uses gmirror
for two RAID-1 arrays of the primary drive and a data drive. The data
drive was reported as degraded after a reset of the server, but is
rebuilding. It is comprised of two TB drives with one reporting ACTIVE
with no flags. The other synchronizing and taking days...

Geom name: d1
State: DEGRADED
Components: 2
Balance: round-robin
Slice: 4096
Flags: NONE
GenID: 0
SyncID: 2
ID: 2434624761
Providers:
1. Name: mirror/d1
   Mediasize: 999653637632 (931G)
   Sectorsize: 512
   Mode: r2w1e1
Consumers:
1. Name: ada1p1
   Mediasize: 999653638144 (931G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 17408
   Mode: r1w1e1
   State: ACTIVE
   Priority: 0
   Flags: NONE
   GenID: 0
   SyncID: 2
   ID: 175176036
2. Name: ada3p1
   Mediasize: 999653638144 (931G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 17408
   Mode: r1w1e1
   State: SYNCHRONIZING
   Priority: 0
   Flags: DIRTY, SYNCHRONIZING
   GenID: 0
   SyncID: 2
   Synchronized: 91%
   ID: 4158324973

I ran the smartctl command below on the synchronizing drive and it seems
there are no errors? Should I trust this drive?

backup# /usr/local/sbin/smartctl -a /dev/ada3
smartctl 5.43 2012-06-30 r3573 [FreeBSD 9.0-RELEASE i386] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST31000528AS
Serial Number:    9VP8EKVV
LU WWN Device Id: 5 000c50 026d2b322
Firmware Version: CC3E
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Oct 11 10:36:54 2012 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection:
Enabled.
Self-test execution status:      (   0) The previous self-test routine
completed
                                        without error or no self-test
has ever
                                        been run.
Total time to complete Offline
data collection:                (  600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection
on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 175) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control
supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   113   097   006    Pre-fail  Always
      -       108410580
  3 Spin_Up_Time            0x0003   095   095   000    Pre-fail  Always
      -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always
      -       34
  5 Reallocated_Sector_Ct   0x0033   076   076   036    Pre-fail  Always
      -       1003
  7 Seek_Error_Rate         0x000f   074   060   030    Pre-fail  Always
      -       25881764
  9 Power_On_Hours          0x0032   079   079   000    Old_age   Always
      -       18567
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always
      -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always
      -       17
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always
      -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always
      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always
      -       0
188 Command_Timeout         0x0032   098   096   000    Old_age   Always
      -       665730089115
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always
      -       0
190 Airflow_Temperature_Cel 0x0022   073   053   045    Old_age   Always
      -       27 (Min/Max 24/33)
194 Temperature_Celsius     0x0022   027   047   000    Old_age   Always
      -       27 (0 18 0 0 0)
195 Hardware_ECC_Recovered  0x001a   023   019   000    Old_age   Always
      -       108410580
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always
      -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always
      -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age
Offline      -       49280454772789
241 Total_LBAs_Written      0x0000   100   253   000    Old_age
Offline      -       3747398897
242 Total_LBAs_Read         0x0000   100   253   000    Old_age
Offline      -       2873229601

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     12756
     -
# 2  Short offline       Completed without error       00%     12750
     -
# 3  Extended offline    Aborted by host               90%     12750
     -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


More information about the freebsd-questions mailing list