How to get Huawei EC1561 USB modem working under FreeBSD 8.2 ?

[Matthias Apitz]

El día Friday, July 20, 2012 a las 05:55:21PM +0530, Manish Jain escribió:

> 
> Hello all,
> 
> I earlier had a Huawei EC1261-based USB modem which used to connect 
> smoothly to the internet under FreeBSD 8.2 using the u3g module. For 
> some reasons, I have had to switch to another provider (MTS) who swapped 
> the Huawei EC1261-based USB modem with a Huawei EC1561-based USB modem. 
> And my FreeBSD system cannot connect to the internet anymore.
> 
> Here are the contents of my ppp.conf (I assume authkey means password) :
> 
> default:
>   set log Phase Chat LCP IPCP CCP tun command
>   allow users bourne
>   set device /dev/cuaU0.0
>   set speed 115200
>   set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
>   \"\" AT OK-AT-OK AT&FE0V1X1&D2&C1S0=0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
>   set timeout 180 # 3 minute idle timer (the default)
>   enable dns # request DNS info (for resolv.conf)
> 
> huawei:
>   set phone "#777"
>   set login
>   set authname "internet at internet.mtsindia.in"
>   set authkey "MTS"
>   set timeout 0
>   disable ipv6cp
>   set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
>   add default HISADDR
>   set dial AT+CRM=1
>   accept CHAP
> 
> The u3g module is loaded at boot-time via /etc/rc.local :
> 
> kldload u3g
> sleep 3
> ppp -auto huawei

Please provide the logs of chat and ppp;

	matthias
-- 
Matthias Apitz
e <guru at unixarea.de> - w http://www.unixarea.de/
UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370)
UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5