Attempting to get an X11 server running
sizemj at lavabit.com
sizemj at lavabit.com
Thu Jun 30 15:22:50 UTC 2011
This is what I use in my xorg.conf
see below
Notice the mode line for resolution, and HorizSync 30-107
VertRefresh 48-120
Also in my /etc/rc.conf I put these lines
hald_enable="YES"
dbus_enable="YES"
This sets up X for me every time and works great.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
EndSection
Section "Module"
Load "extmod"
Load "dri2"
Load "glx"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-107
VertRefresh 48-120
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1280x1024" "1152x864" "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1152x864" "1024x768"
EndSubSection
EndSection
> On Thu, 30 Jun 2011, Dieter BSD wrote:
>
>> google found
>> http://www.daemonforums.org/showthread.php?p=27601
>> which suggests using moused instead of hald. Â moused runs,
>> but I think I have to get Xorg to use a config file to set
>> Â Option "AllowEmptyInput" "off"
>> Â Option "AutoAddDevices" Â "off"
>> so that it will work without hald.
>
> That is incorrect. Don't set AllowEmptyInput, just turn off
> AutoAddDevices.
> http://www.wonkity.com/~wblock/docs/html/aei.html
>
>> Question 1: why does "Xorg -configure" create a config file
>> that doesn't work the same way as just running "Xorg" ?
>
> The defaults assumed when run are different from those in the generated
> config file. I don't know why.
>
>> Question 2: how do I get a usable config file?
>
> Look for examples on the net. Realize that most of xorg.conf is
> optional now, and you can leave out sections where the defaults are
> correct.
>
>> Question 3: how do I get complete modeline info for what
>> it is currently running?
>
> Please don't mess with modelines, it should not be needed any more.
> Just set the resolutions desired in the Screen/Display section. If
> modelines are really required, get them out of /var/log/Xorg.0.log. But
> they almost certainly are not.
>
>> Question 5: how do I get hald to work?
>
> It's not used if you turn off AutoAddDevices or build the xorg-server
> port with the HAL option disabled.
>
> ____________________________________________________________________________________
> Learn more about Free hosting web here!
> http://click.lavabit.com/bb55ie6fuepogc991stquo4wimf15odaskf4w43gft7r9en3g5rb/
> ____________________________________________________________________________________
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
>
More information about the freebsd-questions
mailing list