Install 8.2-Release AMD64 on Laptop with Raid0
cswiger at mac.com
Tue Jul 19 18:52:36 UTC 2011
On Jul 19, 2011, at 11:31 AM, Thomas D. Dean wrote:
>> ar0 is the RAID-0 volume. However, I would advise against using Intel's Matrix pseudo-RAID for a boot volume,
> I searched and did not find a reason to not use it. Just a few
> "recommend against it" without reasons.
There's a set of FreeBSD PR's mentioned at the bottom of:
If you lost a disk even when using mirroring, the system would likely panic and experience data corruption. If you had a disk drop off and reattach, it would possibly be probed as a different RAID volume.
There have been some recent fixes to GEOM RAID mentioned below which are relevant.
Begin forwarded message:
> From: Jeremy Chadwick <freebsd at jdc.parodius.com>
> Date: June 17, 2011 5:51:24 PM PDT
> To: freebsd-stable at freebsd.org
> Cc: freebsd-fs at freebsd.org
> Subject: MFC: graid(8) (RAID GEOM) support
> Sorry for the cross-post, but I thought both lists would want to know
> about this.
> Looks like mav@ just committed this ~17 hours ago:
> Those who have historically wanted to use Intel MatrixRAID (now called
> Intel RST (Rapid Storage Technology)), but haven't due to the severe
> issues/risks with ataraid(4), will probably be very interested in
> this commit. I know I am!
> I plan on stress-testing the Intel support on a 2-disk system with
> RAID-1 enabled, and will document my experiences, procedures, etc...
> Thanks, mav@ and imp@ !
> I'll be sending another mail momentarily asking about USB memory stick
> image building, since to accomplish the above, I want to do a
> "bare-bones" install on our test system (e.g. enable Intel RAID, set up
> 2 disks in a RAID-1 mirror, boot a USB memory stick that contains this
> latest RELENG_8 build, and do sysinstall, etc.. the normal way).
> MFC r219974, r220209, r220210, r220790:
> Add new RAID GEOM class, that is going to replace ataraid(4) in supporting
> various BIOS-based software RAIDs. Unlike ataraid(4) this implementation
> does not depend on legacy ata(4) subsystem and can be used with any disk
> drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4)
> with `options ATA_CAM`). To make code more readable and extensible, this
> implementation follows modular design, including core part and two sets
> of modules, implementing support for different metadata formats and RAID
> Support for such popular metadata formats is now implemented:
> Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage.
> Such RAID levels are now supported:
> RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT.
> For all of these RAID levels and metadata formats this class supports
> full cycle of volume operations: reading, writing, creation, deletion,
> disk removal and insertion, rebuilding, dirty shutdown detection
> and resynchronization, bad sector recovery, faulty disks tracking,
> hot-spare disks. For Intel and Promise formats there is support multiple
> volumes per disk set.
> Look graid(8) manual page for additional details.
> Co-authored by: imp
> Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
> | Jeremy Chadwick jdc at parodius.com |
> | Parodius Networking http://www.parodius.com/ |
> | UNIX Systems Administrator Mountain View, CA, US |
> | Making life hard for others since 1977. PGP 4BD6C0CB |
> freebsd-stable at freebsd.org mailing list
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
More information about the freebsd-questions